Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products

Latitude 5290 2-in-1 Owner's Manual

Removing the SSD module

  1. Follow the procedure in Before working inside your tablet.
  2. Remove the:
    1. uSIM/microSD card

      NOTE: : uSIM card slot is available only on tablets shipping with WWAN module.

    2. display panel
    3. battery
  3. To remove the SSD module:
    1. Remove the M2 x 2.5 screw securing the SSD shield [1].
    2. Lift the SSD shield away from the tablet [2].

      NOTE: :

      • For models shipped with M.2 2280 SSDs, the SSD requires installation of a shielding cover over the SSD.
      • There are five clips near the M.2 2280 SSD slot on the Latitude 5290 2-in-1 system board.
      • For models shipped with M.2 2230 SSDs, the SSD requires installation of a holder over the SSD for securing the SSD in place.

    3. Slide and lift the SSD module from the slot on the tablet [3].

      NOTE: : Ensure NOT to lift the SSD card by an angle more than 15°.

    The image displays to slide and remove the SSD card from the slot

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\