- Notes, cautions, and warnings
- Working on your computer
- Disassembly and reassembly
- Recommended tools
- Screw list
- Subscriber Identity Module (SIM) card
- Micro Secure Digital (SD) Card
- Display panel assembly
- Solid-state drive
- WLAN card
- WWAN card
- Battery
- Heat sink
- Speakers
- Front facing camera
- Rear facing camera
- Smart Card Cage
- Docking board connector
- Power Button Board
- System Board
- I/O Board
- WWAN Antenna
- Microphone
- Display cable
- Back cover
- System setup
- Entering BIOS without keyboard
- System setup options
- General screen options
- System Configuration screen options
- System Configuration screen options
- Video screen options
- Security screen options
- Secure Boot
- Intel software Guard Extensions
- Performance screen options
- Power Management screen options
- POST Behavior
- Virtualization Support options
- Wireless screen options
- Maintenance
- System logs screen options
- System Log
- Updating the BIOS
- Updating your system BIOS using a USB flash drive
- System and setup password
- Troubleshooting
- Handling swollen rechargeable Li-ion batteries
- Enhanced Pre-boot System Assessment - eDiags2.0
- System-diagnostic lights
- LED Indicators and Characteristics
- Kickstand open status behavior
- Updating the BIOS using the USB drive in Windows
- Updating the BIOS in Windows
- Backup media and recovery options
- Wi-Fi power cycle
- Flea power release
- Getting help
Dell Latitude 7210 2-in-1 Service Manual
General screen options
This section lists the primary hardware features of your computer.
- Option
- Description
- System Information
-
- System Information: Displays BIOS Version, Service Tag, Asset Tag, Ownership Tag, Ownership Date, Manufacture Date, and the Express Service Code.
- Memory Information: Displays Memory Installed, Memory Available, Memory Speed, Memory Channels Mode, Memory Technology
- Processor Information: Displays Processor Type, Core Count, Processor ID, Current Clock Speed, Minimum Clock Speed, Maximum Clock Speed, Processor L2 Cache, Processor L3 Cache, HT Capable, and 64-Bit technology.
- Device Information: Displays Primary Hard Drive, Video Controller, Video BIOS Version, Video Memory, Panel Type, Native Resolution, Audio Controller, Wi-Fi Device, Cellular Device, Bluetooth Device.
- Battery Information
- Displays the battery status and the type of AC adapter connected to the computer.
- Boot Sequence
-
- Boot Sequence
- Allows you to change the order in which the computer attempts to find an operating system. The options are:
- Windows Boot Manager
By default, the options is checked.
- Boot List Options
- Allows you to change the boot list option:
- UEFI (The option is enabled by default)
- Advanced Boot Options
- Allows you the legacy option ROMs to load. By default, all the option are disabled.
- UEFI Boot Path SecurityOptions
- Allows you to control whether or not the system will prompt to the user to enter the Admin password, when a user selects a UEFI boot path from the F12 boot Menu.
- Always, Except Internal HDD. This option is enabled by default.
- Always, Except Internal HDD&PXE
- Never
NOTE:These options have no relevance if the Admin password is not set BIOS settings. - Date/Time
- Allows you to change the date and time.
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\