Dell Latitude 7300 Setup and Specifications

PDF

System configuration

Table 1. System ConfigurationThe table describes the system configuration options.
Option	Description
SATA Operation	Allows you to configure the operating mode of the integrated SATA hard-drive controller. Click one of the following options: Disabled AHCI RAID On—Default NOTE: SATA is configured to support RAID mode.
Drives	These fields let you enable or disable various drives on board. The options are: SATA-1 SATA-2 M.2 PCIe SSD-0 M.2 PCIe SSD-1
SMART Reporting	This field controls whether hard drive errors for integrated drives are reported during startup. The option is disabled by default.
USB Configuration	Allows you to enable or disable the internal/integrated USB configuration. The options are: Enable USB Boot Support Enable External USB Ports All the options are set by default. NOTE: USB keyboard and mouse always work in the BIOS setup irrespective of these settings.
Dell Type-C Dock Configuration	Allows you to connect to Dell WD and TB family of docks(Type-C Docks) independent of USB and thunderbolt adapter configuration. This option is enabled by default.
Thunderbolt™ Adapter Configuration	Allows you to enable or disable Thunderbolt options: Thunderbolt (Enabled by Defualt) Enable Thunderbolt Boot Support Enable Thunderbolt (and PCIe behind TBT) Pre-boot With following security levels : No Security User Authentication (Enabled by Defualt) Secure Connect Display Port and USB Only
Thunderbolt™ Auto Switch	This option configures the method used by the Thunderbolt controller to perform PCIe device enumeration. Auto Switch : The BIOS will automatically switch between BIOS Assist and Native Thunderbolt PC device enumeration modes to get all benefits of the installed OS Native Enumeration: The BIOS will program the Thunderbolt controller to Native mode ( Auto Switching is disabled) BIOS Assist Enumeration: The BIOS will program the Thunderbolt controller to BIOS Assist mode ( Auto Switching is disabled) NOTE: A reboot is required for these changes to take effect.
USB PowerShare	This option enable/disable the USB PowerShare feature behavior. This option is disabled by default.
Audio	Allows you to enable or disable the integrated audio controller. By default, the Enable Audio option is selected. The options are: Enable Microphone Enable Internal Speaker This option is set by default.
Keyboard Illumination	This field lets you choose the operating mode of the keyboard illumination feature. Disabled: The Keyboard illumination will always be off or 0%. Dim: Enable the keyboard illumination feature at 50% brightness. Bright (Enabled by Defualt): Enable the keyboard illumination feature at 100% brightness level. NOTE: Option present on system opted with backlit keyboard.
Keyboard Backlight Timeout on AC	This feature defines the timeout value for the keyboard backlight when an AC adapter is plugged into the system. Options are: 5 seconds 10 seconds(Default) 15 seconds 30 seconds 1 minute 5 minute 15 minute Never NOTE: Option present on system opted with backlit keyboard.
Keyboard Backlight Timeout on Battery	This feature defines the timeout value for the keyboard backlight when the system is running only on battery power. Options are: 5 seconds 10 seconds(Default) 15 seconds 30 seconds 1 minute 5 minute 15 minute Never NOTE: Option present on system opted with backlit keyboard.
Unobtrusive Mode	When enabled, pressing Fn+F7 will turn off all light and sound emission in the system. Press Fn+F7 to resume normal operation. Default is Disabled.
Fingerprint Reader	Enable or disable the Fingerprint Reader or the Fingerprint Reader Device's Single Sign On capability. Enable Fingerprint Reader Device: Enabled by Default NOTE: Option present on system opted with finger print reader on the power button.
Miscellaneous devices	Allows you to enable or disable various on board devices. Enable Camera—Default Enable Secure Digital (SD) Card Secure Digital (SD) Card Boot - Disabled Secure Digital Card (SD) Read-Only Mode - Disabled
MAC Address Pass-Through	This feature replaces the external NIC MAC address (in a supported dock or dongle) with the selected MAC address from the system. The options are System Unique MAC Address— Default Disabled