Latitude 5540 Owner's Manual

PDF

Removing the 4G WWAN card (Optional)

Prerequisites

  1. Follow the procedure in Before working inside your computer.
  2. Remove the base cover.

About this task

NOTE:The following steps are for computers with WWAN support.

The following image(s) indicate the location of the 4G WWAN card and provides a visual representation of the removal procedure.

Figure 1. Image: WWAN card
Image: Removing the WWAN card

Steps

  1. Lift the 4G WWAN-card shield off the 4G WWAN card.
  2. Remove the screw (M2x3) that secures the 4G WWAN-card bracket to the 4G WWAN card.
  3. Lift the 4G WWAN-card bracket off the 4G WWAN card.
  4. Disconnect the antenna cables from the 4G WWAN card.
  5. Slide and remove the 4G WWAN card off the 4G WWAN-card slot on the system board.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\