Latitude 5540 Owner's Manual

PDF

Removing the 5G WWAN card (Optional)

Prerequisites

  1. Follow the procedure in Before working inside your computer.
  2. Remove the base cover.

About this task

NOTE:The following steps are for computers with WWAN support.

The following image(s) indicate the location of the 5G WWAN card and provides a visual representation of the removal procedure.

Figure 1. Image: WWAN card
Image: Removing the WWAN card

Steps

  1. Remove the screw (M2x3) that secures the 5G WWAN-card bracket to the 5G WWAN card.
  2. Lift the 5G WWAN-card bracket off the 5G WWAN card.
  3. Remove the two screws (M2x3) that secure the 5G WWAN-card shield to the palm-rest and keyboard assembly.
  4. Lift the 5G WWAN-card shield off the 5G WWAN card.
  5. Disconnect the antenna cables from the 5G WWAN card.
  6. Slide and remove the 5G WWAN card off the 5G WWAN-card slot on the system board.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\