Latitude 9510 Setup and specifications guide

PDF

System configuration

Table 1. System ConfigurationThe table describes the system configuration options.
Option	Description
SATA Operation	Allows you to configure the operating mode of the integrated SATA hard drive controller. The options are: Disabled (disabled by default) AHCI (disabled by default) Raid on (enabled by default)
Drives	These fields let you enable or disable various drives on board. The M.2 PCIe SSD-0 option is enabled by default.
SMART Reporting	This field controls whether hard drive errors for integrated drives are reported during startup. The option Enable SMART Reporting is disabled by default.
USB Configuration	Allows you to configure the integrated USB controller. The options are: Enable USB Boot Support (enabled by default) NOTE:If the Fastboot option is set to "Minimal", the "Enable USB Boot Support" setting is ignored, and the system will not boot from any Preboot USB devices. Enable External USB Port (enabled by default) NOTE:A USB keyboard or mouse or both connected to the platform's USB ports will continue to function within BIOS Setup if this option is disabled.
Thunderbolt™ Adapter Configuration	Allows you to enable or disable Thunderbolt options: Thunderbolt (enabled by default) Enable Thunderbolt Boot Support (disabled by default) Enable Thunderbolt (and PCIe behind TBT) Pre-boot (disabled by default) The following are the security levels: No Security(disabled by default) User Authentication (enabled by default) Secure Connect (disabled by default) Display Port and USB Only (disabled by default)
USB PowerShare	This option enables/disables the USB PowerShare feature behavior. The Enable USB PowerShare option is disabled by default.
Audio	Allows you to enable or disable the integrated audio controller. The Enable Audio option is enabled by default. The options are: Enable Microphone (enabled by default) Enable Internal Speaker (enabled by default)
Keyboard Illumination	This field lets you choose the operating mode of the keyboard illumination feature. Disabled (disabled by default): The Keyboard illumination will always be off or 0%. Dim (disabled by default): Enable the keyboard illumination feature at 50% brightness. Bright (enabled by default): Enable the keyboard illumination feature at 100% brightness level.
Keyboard Backlight Timeout on AC	This feature defines the timeout value for the keyboard backlight when an AC adapter is plugged into the system. Options are: 5 seconds 10 seconds (enabled by default) 15 seconds 30 seconds 1 minute 5 minutes 15 minutes Never
Keyboard Backlight Timeout on Battery	This feature defines the timeout value for the keyboard backlight when the system is running only on battery power. Options are: 5 seconds 10 seconds (enabled by default) 15 seconds 30 seconds 1 minute 5 minutes 15 minutes Never
Unobtrusive Mode	When enabled, pressing Fn+F7 will turn off all light and sound emissions in the system. Press Fn+Shift+B to resume normal operation. The Enable Obtrusive Mode option is disabled by default.
Fingerprint Reader	Enable or disable the Fingerprint Reader Device. The Enable Fingerprint Reader Device is enabled by default.
Miscellaneous devices	Allows you to enable or disable various on board devices. Enable Camera (enabled by default) Enable Secure Digital (SD) Card(enabled by default) Secure Digital (SD) Card Boot (disabled by default) Secure Digital Card (SD) Read-Only Mode (disabled by default)
MAC Address Pass-Through	This feature allows you to replace the external NIC MAC address (in a supported dock or dongle) with the selected MAC address from the system. The default option is to use the Passthrough MAC Address. Options: System Unique MAC Address (enabled by default) Disabled(disabled by default)