Latitude 5175 Service Manual

Procedure

Disconnect the docking port ribbon cable and docking port cable from the system board.
1. docking port ribbon cable
2. system board
3. docking port cable
Remove the screws that secure the tablet bezel to the display assembly.
1. screws (11)
2. tablet bezel
3. display assembly
Using a plastic scribe, pry up along the edges of the tablet bezel.
Lift the tablet-bezel assembly off the display assembly.
1. plastic scribe
2. tablet bezel
3. display assembly
Open the latches and disconnect the touch-screen board cable and display cable from the system board.
Disconnect the I/O-board cable and coin-cell battery cable from the system board.
1. I/O-board cable
2. touch-screen board cable
3. latches (2)
4. display cable
5. coin-cell battery cable
Disconnect the speaker cable from the system board.
Open the latches and disconnect the microphone cable, front-camera cable, and rear-camera cable from the system board.
1. microphone cable
2. front-camera cable
3. rear-camera cable
4. latches (3)
5. system board
6. speaker cable
Remove the screws that secure the system board to the display assembly.
Peel off the foil that secures the system board to the display assembly.
Lift the I/O bracket.
1. system board
2. display assembly
3. foil
4. screws (4)
5. I/O bracket
Lift the system board off the display assembly.
1. system board
2. display assembly