Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products

Dell Latitude E7270 Owner's Manual

Removing the eDP cable

  1. Follow the procedure in Before working inside your computer .
  2. Remove the:
    1. base cover

    2. battery

    3. display assembly

    4. display bezel

      • NOTE: This is applicable only for non touch systems.
    5. display panel

  3. Disconnect the camera cable from the camera [1].
  4. Peel the camera cable adhesive and unroute the eDP and display cable from the routing clips on the display assembly [2, 3].
  5. Remove the eDP cable from the display assembly.
    Figure 1. Removing the eDP cable for non touch systems Figure displaying removing the eDP cable for non touch systems.
    Figure 2. Removing the eDP cable for touch systems Figure displaying removing the eDP cable for touch systems.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\