Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products

Dell Latitude E7270 Owner's Manual

Removing the system board

  1. Follow the procedure in Before working inside your computer .
  2. Remove the:
    1. base cover

    2. battery

    3. memory module

    4. SSD

    5. dock frame

    6. WLAN card

    7. WWAN card

    8. heat sink assembly

    9. coin cell battery

  3. To remove the display assembly cable:
    1. Unroute the WWAN and WLAN cables [1].
    2. Remove the screw that secures the display assembly cable bracket to the system board [2].
    3. Lift the display assembly cable bracket from the computer [3].
    4. Disconnect the display assembly cable from the computer [4].
    Figure displaying removing display assembly cable.
  4. Disconnect the speaker cable [1], LED board cable [2], USH board cable and touchpad board cables [3, 4], power connector port cable [5]. Figure displaying disconnecting cable.
  5. To remove the system board:
    1. Remove the screws that secure the metal bracket to the system board [1]
    2. Lift the metal bracket [2].
    3. Remove the screws that secure system board to the computer [3].
    4. Lift the system board from the computer [4].
    Figure displaying removing system board.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\