The settings on the page enable you to collect data for the devices and groups added to
Power Manager. Set the
Sampling Intervals according to your data center recommendations and monitor your devices.
About this task
If you are logging in as a Device Manager, then you can only view the preferences that are configured by an Administrator.
To set the units and sampling intervals, perform the following steps:
Steps
Launch OpenManage Enterprise, and then click
Plugins > Power Management > Settings.
The
Settings tab is displayed.
Click
Edit.
The
Edit
Power Manager Preferences window is displayed.
Select the values for the listed options, and then click
Apply.
The following table provides more information about the attributes that are displayed in
Power Manager.
Table 1. Power Manager SettingsBrief description of the intervals that you can set in
Power Manager.
Field
Description
Data gathering interval
Select the frequency to collect data from devices or groups.
Use your data center requirements such as network traffic, and criticality of data to set the data gathering interval.
NOTE If you have set the data gathering interval as 15 minutes, and only when the number of devices that are added to
Power Manager exceeds 1000, the interval automatically changes to 30 minutes. You cannot return this 30 minutes setting to 15 minutes.
Duration of top energy consumers
Select the duration to view the list of devices or groups that consume maximum energy on the OpenManage Enterprise dashboard for the selected duration.
Only the top five energy consumers are displayed.
Report Duration
View data for the selected duration.
Aggregation Period
Select the frequency of the level of detailed information that has to be displayed in reports.
NOTE If you select a
Report Duration other than 1 Day, the
Aggregation Period is automatically set to
1 Day.
Delete
Power Manager data
Based on your data requirements, select one of the options:
Yes—To delete configured alert thresholds and metric data that is collected from devices and groups when they are removed from
Power Manager.
No—To retain the configured alert thresholds and metric data that is collected from devices and groups when they are removed from
Power Manager.
NOTE When you add a device or group and set
Delete Power Manager data to
No, all Power Manager-related data for that device or group is removed from view but not deleted, when you remove the device or group from Power Manager. When you re-add the device or group, data for that device or group is available again.
NOTE To delete the data after a specific duration, configure the
Data purge interval option present in the following location:
OpenManage Enterprise > Application Settings > Console Preferences > Metrics Collection Settings.
The following table provides further information about the mandatory fields and the value range for each field.
Table 2. Details about mandatory data intervals and durationMandatory fields and value ranges for
Power Manager preferences
Field
Mandatory
Value Range
Power Unit
Yes
Watt is the default unit.
Watt
BTU/Hr
Temperature Unit
Yes
Celsius is the default unit.
Celsius
Fahrenheit
Data gathering interval
Yes
The default value is
15 minutes.
15
30
60
Duration of top energy consumers
Yes
The default value is
3 Months.
1 Day
7 Days
15 Days
1 Month
3 Months
6 Months
1 Year
Report Duration
Yes
The default value is
3 Months.
1 Day
7 Days
15 Days
1 Month
3 Months
6 Months
1 Year
Aggregation Period
Yes
The default value is
1 Day.
1 Day
Delete
Power Manager data
Yes
The default value is
No.
Yes
No
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\