Dell EMC OpenManage Essentials Version 2.5 User's Guide

SNMP V3 Configuration

The following table describes the fields displayed in the SNMP V3 Configuration.
Table 1. SNMP V3 Configuration. The following table describes the fields displayed in the SNMP V3 Configuration.
Field Description

Agent IP Address

Provide the SNMP agent IP address.

Engine ID

Provide the unique engine ID of the SNMP agent.

Username

Provide the user name required to execute the task on the device.

Authentication Protocol

Select the authentication protocol for the discovery of the devices. The available options are MD5, SHA1, and none. The device must be configured using the same authentication protocol for the discovery to be successful. If the authentication protocol is selected to be none, then the encryption option is also disabled.

Authentication Password

Provide the authentication password.

Encryption Protocol

Select the encryption protocol for the discovery of the devices. The available options are AES, DES, and none. The device must be configured using the same encryption protocol for the discovery to be successful.

Encryption Password

Provide the encryption password.

Refresh

Click to refresh the SNMP V3 Configuration page to display the added SNMP V3 traps.

Add New

Click to configure the SNMP V3 traps manually.

Import

Click to import the .csv file containing the SNMP V3 trap credentials.

Export

Click to export the SNMP V3 trap credentials to a .csv file.

Save

Click to save the SNMP V3 traps after importing the credentials from a .csv file or by providing the credentials manually.

Delete

Click to delete the selected SNMP V3 traps from the list.


Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\