Dell EMC OpenManage Integration Version 1.1.0 with Microsoft Windows Admin Center User’s Guide

Manage Dell EMC PowerEdge Servers

Prerequisites:
To manage PowerEdge servers:
  1. In the upper left corner of Windows Admin Center, select Server Manager from the drop-down menu.
  2. From the list, select a server connection, and then click Connect.
    NOTE: If you have not entered the server credentials while adding the connection, you must enter the credentials when you are connecting to the server by selecting "Manage as".
  3. In the left pane of the Microsoft Windows Admin Center, under EXTENSIONS, click Dell EMC OpenManage Integration.
  4. Select:
NOTE: The health, hardware inventory, and iDRAC details are cached and will not be loaded each time the extension is loaded. To view the latest health and inventory status and iDRAC details, in the upper-right corner of the Health Status, click Refresh.
NOTE: For modular servers (YX2X, YX3X, YX4X, YX5X, and above models of PowerEdge servers), the following information that is related to fans and power supplies are not displayed:
  • Health status
  • Attribute values in the hardware inventory table
NOTE: For YX2X and YX3X models of PowerEdge servers with firmware version earlier than 2.60.60.60, information about the following components are not displayed:
  • Health status—Accelerators, memory, storage controllers, storage enclosures, and physical disks.
  • Hardware inventory—Accelerators, memory, storage controllers, storage enclosures, physical disks, network devices, and firmware.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\