Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell OptiPlex 3020–Small Form Factor Owner's Manual

Clearing CMOS

  1. Follow the procedures in Before Working Inside Your Computer .
  2. Remove the cover.
  3. Remove the PCI card if installed.
  4. Identify the CMOS jumper on the system board, see the System Board Components.
  5. Place the 2-pin jumper plug on pins 1 and 2 to clear CMOS
  6. Install PCI card if installed.
  7. Install the cover.
  8. Connect the computer to the electrical outlet and power-on the computer to clear the CMOS.
  9. Power-off the computer and disconnect the power cable from the electrical outlet.
  10. Remove the cover.
  11. Replace the jumper on the pins 1 and 2.
  12. Install PCI card if installed.
  13. Install the cover.
  14. Follow the procedures in After Working Inside Your Computer.
  15. Power-on the computer.

Rate this content

Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\