Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell OptiPlex Micro Cable Cover User Guide

Dell OptiPlex Micro Cable Cover

The cable cover for the Dell OptiPlex Micro system helps protect the ports and cables connected to the system.

Follow these steps to install the cable cover.
  • NOTE: Images shown below may vary depending on your system configuration.
  1. Route the cables through the slot at the bottom of the cable cover.Route the cable covers
  2. Connect the cables to their respective ports and turn the antenna (if available/applicable) outwards to pass through the antenna slot at the top of the cable cover. Installing micro cable cover
  3. Align the cable cover retaining hooks into their slots on the Dell OptiPlex Micro chassis.
    • CAUTION: Take care not to bend or break the delicate plastic hooks.
    Align the cable cover retaining hooks
  4. Gently press down on the cable cover (1) till it clicks into place and slide the latch (2) to lock the cable cover in place. Lock the cable cover
    • NOTE: For added security, use the Noble Wedge slot to secure the system.

Rate this content

Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\