
Dell OptiPlex 3070 Micro Setup and Specifications
Power
NOTE:These form factors utilize a more efficient Active Power Factor Correction (APFC) power supply. Dell recommends only Universal Power Supplies (UPS) based on Sine Wave output for APFC PSUs, not an approximation of a Sine Wave, Square Wave, or quasi-Square Wave. If you have questions, please contact the manufacturer to confirm the output type.
| Tower | Small Form Factor | Micro | |||||
|---|---|---|---|---|---|---|---|
| Power Supply1 | APFC | EPA Bronze | EPA Platinum | APFC | EPA Bronze | EPA Platinum | EPS Level V |
| Wattage | 260 W | 200 W | 65 W | ||||
| AC input voltage range | 90-264 Vac | 90-264 Vac | 90-264 Vac | ||||
| AC input current (low ac range / high ac range) | 4.2 A/2.1 A | 3.2 A/1.6 A | 1.7 A/1.0 A | ||||
| AC input frequency | 47 Hz/63 Hz | 47 Hz/63 Hz | 47 Hz/63 Hz | ||||
| AC holdup time (80% load) | 16mS | 16mS | NA | ||||
| Average efficiency (ESTAR 7.0/7.1 compliant) | NA | 82-85-82% @ 20-50-100% | 90-92-89% @ 20-50-100% load | NA | 82-85-82% @ 20-50-100% | 90-92-89% @ 20-50-100% load | 87% |
| Typical Efficiency (APFC) | 70% | NA | NA | 70% | NA | NA | NA |
| DC Parameters: | |||||||
| +12.0v output | 12 VA/16.5 A; 12 VB/16 A | 12 VA/16.5 A; 12 VB/14 A | |||||
| +19.5v output | NA | NA | 19.5 V/3.34 A | ||||
| +12.0v auxiliary output | 2.5 A | 2.5 A | NA | ||||
| Max total power | 260 W | 200 W | NA | ||||
| Max combined 12.0v power (note: only if more than one 12v rail) | 260 W | 200 W | NA | ||||
| BTUs/h (based on PSU max WT) | 888 BTU | 683 BTU | 222 BTU | ||||
| Power Supply Fan | 60 mm*25 mm | 60 mm*25 mm | NA | ||||
| Compliance: | |||||||
| ErP Lot6 Tier 2 0.5watt requirement | Yes | Yes | Yes | Yes | Yes | Yes | NA |
| 80Plus Certified | No | Yes | Yes | No | Yes | Yes | No |
| FEMP Standby Power Compliant | Yes | Yes | Yes | Yes | Yes | Yes | No |
| 3.0v CMOS battery (Type and estimated battery life): | |||||||
|---|---|---|---|---|---|---|---|
| Brand | Type | Voltage | Composition | Life | |||
| JHIH HONG | CR2032 | 3 V | Lithium | Continuous Discharge Under 15 kΩ Load to 2.5 V End-Voltage. 20 °C±2 °C: 940Hrs or longer; 910Hrs or longer after 12 mo. | |||
| PANASONIC | CR2032 | 3 V | Lithium | Continuous Discharge Under 15 kΩ Load to 2.5 V End-Voltage. 20 ℃±2 ℃.1183Hrs or longer 1133Hrs or longer after 12 mo. | |||
| MITSUBISHI | CR2032 | 3 V | Lithium | Continuous Discharge Under 15 kΩ Load to 2.0 V End-Voltage. 20 ℃±2 ℃ 940Hrs or longer 910Hrs or longer after 12 mo. | |||
| SHUNWO & KTS | CR2032 | 3 V | Lithium | Continuous Discharge Under 15 kΩ Load to 2.5V End-Voltage. 20 ℃±2 ℃.1183Hrs or longer 1133Hrs or longer after 12 mo. | |||
1 Power Supplies not available in all countries.
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\