OptiPlex 7080 Micro Setup and specifications guide

PDF

Ports and connectors

Table 1. Ports and connectors
The following table lists ports and connectors available on OptiPlex 7080 Micro.
Description	Values
External:
Network	One RJ-45 port 10/100/1000 Mbps (rear)
USB	Without discrete graphics: One USB 3.2 Gen 2 Type-A port with PowerShare (front) One USB 3.2 Gen 2 Type-C port (front) One USB 3.2 Gen 1 Type-A port (rear) Two USB 3.2 Gen 2 Type-A ports (rear) One USB 3.2 Gen 1 Type-A port with Smart Power on (rear) With discrete graphics: One USB 3.2 Gen 2 Type-A port with PowerShare (front) One USB 3.2 Gen 2 Type-C port (front) Two USB 3.2 Gen 2 Type-A ports (rear) One USB 3.2 Gen 1 Type-A port with Smart Power on (rear)
Audio	One Universal Audio Jack (front) One Line-out port (retaskable Line-in) (front)
Video	Two DisplayPort 1.4 port (rear) One VGA Port/DisplayPort 1.4 Port/HDMI 2.0b Port/ USB 3.2 Gen 2 Type-C Port with Alt-mode (optional) (Not supported with Discrete graphics) One Serial RS232 (optional) (Not supported with Discrete graphics) One Serial/PS2 port (optional) (Not supported with Discrete graphics)
Memory card reader	Not supported
Power port	4.5 mm DC barrel-type 7.4 mm DC barrel-type for 65 W CPU and discrete graphics
Security	One kensington security-cable slot
Antenna	Two SMA connectors (optional)
Internal:
SATA	One SATA slots for 2.5-inch Hard-disk drive
M.2	One M.2 2230 slot for WiFi/Bluetooth card One M.2 2230/2280 slot for PCIe solid-state drive/Intel Optane One M.2 2280 slot for PCIe solid-state drive/Intel Optane One SATA slots for 2.5-inch hard-disk drive (for 35 W and 65 W only) One half-height Gen3 PCIe x8 slot (discrete graphics) NOTE:To learn more about the features of different types of M.2 cards, see the knowledge base article SLN301626.