Skip to main content
Contact Us

OptiPlex 7080 Micro Setup and specifications guide

PDF

Storage

Your computer supports one of the following configurations:
  • One 2.5-inch hard-disk drive
  • One M.2 2230 or 2280 solid-state drive (class 35 or class 40)
  • Two M.2 2230 or 2280 solid-state drive (class 35 or class 40)
  • One 2.5-inch hard-disk drive and one M.2 16 or 32 GB Intel Optane memory
The primary drive of your computer varies with the storage configuration. For computers:
  • with a M.2 solid-state drive, the M.2 solid-state drive is the primary drive
  • with a M.2 Optane drive, the 2.5-inch hard-disk drive is the primary drive
  • without a M.2 drive, the 2.5-inch hard-disk drive is the primary drive
Table 1. Storage specifications

The following table provides the different storage options available on OptiPlex 7080 Micro.
Storage type Interface type Capacity

2.5-inch, 5400 RPM, hard-disk drive

SATA 3.0

Up to 2 TB

2.5-inch, 7200 RPM, hard-disk drive

SATA 3.0

Up to 1 TB

2.5-inch, 7200 RPM, FIPS Self Encrypting Opal 2.0, hard-disk drive

SATA 3.0

500 GB

2.5-inch. solid-state drive

SATA Class 20

512 GB

M.2 2230 solid-state drive

Gen 3 PCIe x4 NVMe, Class 35

Up to 512 GB

M.2 2280 solid-state drive

Gen 3 PCIe x4 NVMe, Class 40

Up to 2 TB

M.2 2280 Opal Self-Encrypting solid-state drive

Gen 3 PCIe x4 NVMe, Class 40

Up to 1 TB

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\