OptiPlex 7090 Ultra Setup and specifications guide

PDF

Intel Optane Memory H10 with Solid State Storage

Intel Optane Memory technology utilizes 3D XPoint memory technology and functions as a non-volatile storage cache/accelerator and/or storage device depending on the Intel Optane Memory installed in your computer.

Intel Optane Memory H10 with Solid State Storage functions as both a non-volatile storage cache/accelerator (enabling enhanced read/write speeds for hard-drive storage) and a solid-state storage solution. It neither replaces nor adds to the memory (RAM) installed on your computer.

Table 1. Intel Optane Memory H10 with Solid State Storage specificationsThe following table provides the Intel Optane Memory H10 with Solid State Storage information for OptiPlex 7090 Ultra.
Description Values

Interface

 PCIe 3 x4 NVMe
  • One PCIe 3 x2 for Optane memory
  • One PCIe 3 x2 for solid-state storage

Connector

 M.2
Form factor 2280
Capacity (Intel Optane memory) 32 GB
Capacity (solid-state storage) 512 GB
NOTE Intel Optane Memory H10 with Solid State Storage is supported on computers that meet the following requirements:
  • 9th Generation or higher Intel Core i3/i5/i7 processors
  • Windows 10 64-bit version or higher
  • Intel Rapid Storage Technology driver version 15.9.1.1018 or higher

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\