Integrated Dell Remote Access Controller 9 RACADM CLI Guide

Accessing Indexed-Based Device Groups and Objects

• To access any object, run the following syntax:

  device.<group name>.[<index>].<object name>

• To display the supported indexes for a specified group, run:

  racadm get device.<group name>

  Example

  racadm get nic.nicconfig
  NIC.nicconfig.1 [Key=NIC.Integrated.1-1-1#nicconfig]
  NIC.nicconfig.2 [Key=NIC.Integrated.1-2-1#nicconfig]
  NIC.nicconfig.3 [Key=NIC.Integrated.1-3-1#nicconfig]
  NIC.nicconfig.4 [Key=NIC.Integrated.1-4-1#nicconfig]

• To display the object list for the specified group, run:

  racadm get device.<group name>.<index>

  Example

  racadm get nic.nicconfig.2
  [Key=NIC.Integrated.1-2-1#nicconfig]
  BannerMessageTimeout=5
  BootStrapType=AutoDetect
  HideSetupPrompt=Disabled
  LegacyBootProto=NONE
  LnkSpeed=AutoNeg
  #VLanId=1
  VLanMode=Disabled

• To display a single object for the specified group, run:

  racadm get device.<group name>.<index>.<object name> 

  Example

  racadm get nic.nicconfig.3.legacybootproto
  [Key=NIC.Integrated.1-3#NICConfig]
  Legacybootproto=PXE