Integrated Dell Remote Access Controller 9 RACADM CLI Guide

PDF

remoteimage

Table 1. Details of remoteimageThe following table provides details about the remoteimage subcommand:
remoteimage
Description	Connects, disconnects, or deploys either media file or directory on a remote server. NOTE:Attach directory feature is only supported on 15th generation and newer PowerEdge servers. To run this subcommand, you must log in with virtual media privilege for iDRAC.
Synopsis	racadm remoteimage -d racadm remoteimage -s racadm remoteimage -c [-u <username> -p <password> -l <image_path>]
Input	-c—Connect the image. -d—Disconnect image. -u—User name to access shared folder. -p—Password to access shared folder. -l —Image location on the network share; use single quotation marks around the location. -s —Display current status. NOTE: Use a forward slash (/) when providing the image location. If backward slash (\) is used, override the backward slash for the command to run successfully. For example: racadm remoteimage -c -u user -p xxx -l /\/\192.168.0.2/\CommonShare/\diskette NOTE:The following options only apply to connect and deploy actions -u —Username. User name to access the network share. For domain users, you can use the following formats: domain/user domain\user user@domain -p —Password to access the network share.
Example	Disable Remote File Sharing. racadm remoteimage -d Disable Remote File Started. Please check status using -s option to know Remote File Share is ENABLED or DISABLED. Check Remote File Share status. racadm remoteimage -s Remote File Share is Enabled UserName Password ShareName //192.168.0/xxxx/dtk_3.3_73_Linux.iso Deploy a remote image on iDRAC CIFS Share. racadm remoteimage -c -u admin -p xxx -l //192.168.0.32/dev/OM840.iso Deploy a remote image on iDRAC NFS Share. racadm remoteimage -c -u root -p password -l '192.168.1.113:/opt/nfs/Test NOTE:In the above example, Test is a folder name . Deploy a remote image on iDRAC HTTP Share. racadm remoteimage -c -u "user" -p "xxx" -l http://shrloc/foo.iso Deploy a remote image on iDRAC HTTPS Share. racadm remoteimage -c -u "user" -p "xxx" -l https://shrloc/foo.iso NOTE: -p and -u options are not mandatory in case of HTTP/HTTPS based remoteimage commands.