Dell PERC13 and PERC12 User’s Guide PERC H975 Series and PERC H965 Series cards

Convert a non-RAID disk to RAID-capable

To convert a non–RAID disk to RAID capable disk from the HII Configuration Utility, perform the following steps:

1. Navigate to the PERC Configuration Utility.
2. Click Main Menu > Device Management > Logical Enclosure <enclosure Number>. An enclosure number can be 0, 1, 2, 3, 4, and so on.
   All the hard drives that are associated with the selected enclosure are listed.
3. Select the hard drive.
4. From the Operations list, select Convert to RAID capable.
5. Click Go.
   A message prompts if you are sure that you want to perform the operation.
6. Select the Confirm option.
7. Click Yes.
   The operation is successful.