Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Dell EMC PowerEdge C4140 Installation and Service Manual

PDF

Inside the system

The 2.5-inch drive cage is completely independent of the GPU configuration of the system and is supported on the switchboard, NVLink, or cabled configuration (B, C, G, K, and M).

The optional two 2.5-inch cabled SATA SSDs is installed only in PSU 2 bay.

Figure 1. Configuration B
This image shows Configuration B: 2CPUs w/ 4GPUs, (1) x16 GPU PCIe, (2) x16 LP AIC PCIe.
  1. PCIe GPU (4)
  2. PCIe switch board
  3. Cooling fan (8)
  4. DIMMs (24)
  5. Processor and heat sink (2)
  6. PSU (2)
  7. Information tag
  8. Riser 2A (Low-profile PCIe expansion card: Slot 3)
  9. Network daughter card (NDC)
  10. Riser 1A (Low-profile PCIe expansion cards: Slots 1 and 2)
  11. System board
Figure 2. Configuration G
This image shows Configuration B: 2CPUs w/ 4GPUs, (1) x16 GPU PCIe, (2) x16 LP AIC PCIe.
  1. PCIe GPU (4)
  2. PCIe switch board
  3. Cooling fan (8)
  4. DIMMs (24)
  5. Processor and heat sink (2)
  6. PSU (2)
  7. Information tag
  8. Riser 2A (Low-profile PCIe expansion card: Slot 3)
  9. Network daughter card (NDC)
  10. Riser 1A (Low-profile PCIe expansion cards: Slots 1 and 2)
  11. System board
Figure 3. Configuration K
This image shows Configuration K: 2CPUs w/ 4GPUs NVLINK2, (2) x16 LP AIC PCIe.
  1. NVLink Heat sink and processor (4)
  2. NVLink air shroud
  3. NVLink board
  4. Cooling fan (8)
  5. Air shroud
  6. PSU (2)
  7. Information tag
  8. Riser 2A (Low-profile PCIe expansion card: Slot 3)
  9. Network daughter card (NDC)
  10. Riser 1A (Low-profile PCIe expansion cards: Slots 1 and 2)
  11. System board
  12. Processor and heat sink (2)
  13. DIMMs (24)
Figure 4. Configuration M
This image shows Configuration M: 2CPUs w/ 4GPUs NVLINK2, (2) x16 LP AIC PCIe.
  1. NVLink Heat sink and processor (4)
  2. NVLink air shroud
  3. NVLink board
  4. Cooling fan (8)
  5. Air shroud
  6. Rear SATA SSD cage
  7. Information tag
  8. PSU
  9. Riser 2A (Low-profile PCIe expansion card: Slot 3)
  10. Network daughter card (NDC)
  11. Riser 1A (Low-profile PCIe expansion cards: Slots 1 and 2)
  12. System board
  13. Processor and heat sink (2)
  14. DIMMs (24)

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\