PowerEdge Servers Error and Event Messages Reference Guide
CAPP—Application Event Messages
CAPP0102
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- SMTP Alert configuration modified.
- Detailed Description
- SMTP Alert configuration modified.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CAPP = Application)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP0103
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- SNMP Alert configuration modified.
- Detailed Description
- SNMP Alert configuration modified.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CAPP = Application)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP0104
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Syslog Alert configuration modified.
- Detailed Description
- Syslog Alert configuration modified.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CAPP = Application)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP0105
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Test SNMP trap sent by arg1 to arg2 from arg3.
- Arguments
- arg1 = user name
- arg2 = target IP
- arg3 = IP Address
- Detailed Description
- Test SNMP alert sent by user identified in the message to the target IP address from the source IP address.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CAPP = Application)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP0107
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Test Syslog message sent by arg1 to arg2.
- Arguments
- arg1 = user name
- arg2 = target IP
- Detailed Description
- Test Syslog message sent by user to destinationIP.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CAPP = Application)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP0108
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Secure Syslog Client CSR generation failed.
- Detailed Description
- When user attempts to generate CSR, if it fails user gets this error message.
- Recommended Response Action
- Retry client CSR generation.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP0109
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Secure Syslog client certificate uploaded.
- Detailed Description
- When user attempts to upload Client certificates and it is successful this message will appear. secure syslog certificate uploaded.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CAPP = Application)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP0110
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Secure Syslog client certificate upload failed.
- Detailed Description
- When user attempts to upload Client certificates and it is failed this message will appear.
- Recommended Response Action
- Please upload a valid certificate.
- Category
- Configuration (CAPP = Application)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP0178
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Console setting arg1 modified.
- Arguments
- arg1 = setting name
- Detailed Description
- The console setting identified in the message is updated.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CAPP = Application)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP0188
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Secure Syslog certificate uploaded.
- Detailed Description
- Secure Syslog certificate uploaded successfully.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CAPP = Application)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP0189
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Secure Syslog certificate upload failed.
- Detailed Description
- Secure Syslog certificate upload failed.
- Recommended Response Action
- Please upload a valid certificate.
- Category
- Configuration (CAPP = Application)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP0190
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Invalid SNMPv3 configuration.
- Detailed Description
- One of the SNMPv3 configurations is missing required elements: UserName, AuthenticationType, AuthenticationPassphrase, PrivacyType, and PrivacyPassphrase.
- Recommended Response Action
- Ensure that all required attributes are included in the SNMPv3 configuration and retry the operation.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP0191
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The IsSnmpv3Enabled flag is required.
- Detailed Description
- Invalid SNMPv3 configuration.
- Recommended Response Action
- Ensure that the IsSnmpv3Enabled flag is properly defined. Retry the operation after correcting the settings.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP0192
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- SNMPv3 configuration limit exceeded.
- Detailed Description
- Only four SNMPv3 configurations are allowed.
- Recommended Response Action
- Only four SNMPv3 configurations are allowed.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP0193
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Invalid authentication type specified.
- Detailed Description
- Supported types are: MD5, SHA, SHA-224, SHA-256, SHA-384, SHA-512, or NONE.
- Recommended Response Action
- Provide a valid authentication type from the list provided and retry the operation.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP0194
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Invalid privacy type specified.
- Detailed Description
- Supported types are: DES, AES, AES-192, AES-256, or NONE.
- Recommended Response Action
- Provide a valid privacy type from the list provided and retry the operation.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP0195
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Invalid SNMPv3 configuration input.
- Detailed Description
- The SNMP configuration provided is invalid.
- Recommended Response Action
- Ensure your input meets the required format and includes valid values.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP0196
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The following fields cannot be null when IsModified is not set: UserName, AuthenticationType, AuthenticationPassphrase, PrivacyType, and PrivacyPassphrase.
- Detailed Description
- Ensure that all required fields contain valid values.
- Recommended Response Action
- Provide values for all mandatory fields and retrythe operation.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP0197
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The following fields cannot be null when IsModified is true: UserName, AuthenticationType, AuthenticationPassphrase, PrivacyType, and PrivacyPassphrase.
- Detailed Description
- Ensure that all required fields contain valid values.
- Recommended Response Action
- Provide values for all mandatory fields and retry the operation.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP0198
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- UserName cannot be null when IsModified is false.
- Detailed Description
- Provide a valid UserName.
- Recommended Response Action
- Enter a UserName and retry the operation.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP0199
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Duplicate SNMPv3 username found.
- Detailed Description
- Duplicate SNMPv3 username found.
- Recommended Response Action
- Provide a different username that is not already in use and retry the operation.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP0200
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Authentication conflict detected.
- Detailed Description
- Authentication passphrase cannot be entered when authentication type is set to NONE.
- Recommended Response Action
- Set the authentication type to a valid option that requires a passphrase or remove the passphrase if the type is NONE.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP0201
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Privacy type and authentication type conflict detected.
- Detailed Description
- Privacy type must be set to NONE when authentication type is NONE.
- Recommended Response Action
- Set the privacy type to NONE if the authentication type is set to NONE.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP0202
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Privacy type and privacy passphrase conflict detected.
- Detailed Description
- Privacy phrase must be empty when privacy type is NONE.
- Recommended Response Action
- Ensure the privacy passphrase is left empty if the privacy type is set to NONE.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP0203
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- One or more entries do not have a valid username as the username is not found in the database.
- Detailed Description
- Ensure that the usernames are registered in the database.
- Recommended Response Action
- Verify that all usernames are correct and exist in the database before retrying the operation.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP0204
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- SNMP listener configuration failed.
- Detailed Description
- SNMP listener configuration failed.
- Recommended Response Action
- No response action is required.
- Category
- Audit (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP0205
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Request to update SNMP listener configuration accepted.
- Detailed Description
- Request to update SNMP listener configuration accepted.
- Recommended Response Action
- No response action is required.
- Category
- Audit (CAPP = Application)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP0206
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The Port Number is invalid. It must be between 1 and 65535.
- Detailed Description
- Enter a Port Number within the specified range.
- Recommended Response Action
- Check the Port Number you entered and ensure it falls within the range of 1 to 65535.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP0207
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The privacy passphrase must be at least 8 characters long.
- Detailed Description
- Enter a passphrase that meets the minimum length requirement.
- Recommended Response Action
- Make sure your privacy passphrase has at least 8 characters and try again.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP0208
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Cannot update SNMP configuration. Provide a valid SNMPv3 configuration to enable SNMPv3.
- Detailed Description
- Make sure all required SNMPv3 settings are correctly filled out.
- Recommended Response Action
- Verify your SNMPv3 configuration settings and try updating again.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP0209
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The authentication passphrase must be at least 8 characters long.
- Detailed Description
- Enter a passphrase that meets the minimum length requirement.
- Recommended Response Action
- Make sure your authentication passphrase has at least 8 characters and try again.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP0210
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- SNMP listener configuration updated successfully.
- Detailed Description
- SNMP listener configuration updated successfully.
- Recommended Response Action
- No response action required.
- Category
- Audit (CAPP = Application)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1010
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to retrieve the host name.
- Detailed Description
- The host name cannot be retrieved.
- Recommended Response Action
- Retry the operation. If the issue persists, contact your system administrator.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1011
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to change the host name.
- Detailed Description
- The host name cannot be changed.
- Recommended Response Action
- Retry the operation. If the issue persists, contact your system administrator.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1030
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to retrieve the time zone.
- Detailed Description
- The time zone cannot be retrieved.
- Recommended Response Action
- Retry the operation. If the issue persists, contact your system administrator.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1031
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to retrieve the time zone list.
- Detailed Description
- The time zone list cannot be retrieved.
- Recommended Response Action
- Retry the operation. If the issue persists, contact your system administrator.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1032
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to change the time zone.
- Detailed Description
- The time zone cannot be changed.
- Recommended Response Action
- Retry the operation. If the issue persists, contact your system administrator.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1033
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to save or apply the Network Time Protocol (NTP) settings.
- Detailed Description
- The Network Time Protocol (NTP) settings cannot be saved or applied because of an unknown error.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1034
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to update the web service configuration.
- Detailed Description
- The web service configuration cannot be updated.
- Recommended Response Action
- Retry the operation. If the issue persists, contact your system administrator.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1035
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to retrieve web server configuration information.
- Detailed Description
- The web server configuration information cannot be retrieved.
- Recommended Response Action
- Retry the operation. If the issue persists, contact your system administrator.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1036
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Time settings modified successfully.
- Detailed Description
- Time settings modified successfully.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CAPP = Application)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1037
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Web server settings modified successfully.
- Detailed Description
- Web server settings modified successfully.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CAPP = Application)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1038
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Invalid console setting value arg1 for setting arg2 to perform this action.
- Arguments
- arg1 = settingValue
- arg2 = settingName
- Detailed Description
- Current Console setting value does not support this operation.
- Recommended Response Action
- Set the right console setting value to allow this operation.
- Category
- Miscellaneous (CAPP = Application)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1039
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to update the console setting.
- Detailed Description
- The console setting could not be updated.
- Recommended Response Action
- Retry the operation. If the issue persists, contact your system administrator.
- Category
- Configuration (CAPP = Application)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1040
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to turn off the appliance.
- Detailed Description
- The appliance cannot be turned off.
- Recommended Response Action
- Retry the operation. If the issue persists, contact your system administrator.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1041
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to restart the appliance.
- Detailed Description
- The appliance cannot be restarted.
- Recommended Response Action
- Retry the operation. If the issue persists, contact your system administrator.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1042
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to update the network configuration because the arg1 is already in use.
- Arguments
- arg1 = port
- Detailed Description
- The network configuration cannot be updated because the port identified in the message is being used by another service.
- Recommended Response Action
- Enter a different port number and retry the operation.
- Category
- Configuration (CAPP = Application)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1043
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Certificate is successfully uploaded.
- Detailed Description
- Certificate is successfully uploaded by the user identified in the message.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CAPP = Application)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1044
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to execute the diagnostic command because the entered command is not supported.
- Detailed Description
- The request cannot be processed because the entered command is not supported.
- Recommended Response Action
- Enter a supported command and retry the operation.
- Category
- Configuration (CAPP = Application)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1045
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The device settings arg1 is successfully modified.
- Arguments
- arg1 = setting name
- Detailed Description
- The device settings identified in the message is successfully modified.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CAPP = Application)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1046
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Brand information modified successfully.
- Detailed Description
- Brand information modified successfully.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CAPP = Application)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1047
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Restarted the appliance.
- Detailed Description
- The appliance has restarted.
- Recommended Response Action
- Please restart the appliance.
- Category
- Configuration (CAPP = Application)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1050
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to update the network service.
- Detailed Description
- The network service could not be updated.
- Recommended Response Action
- Retry the operation. If the issue persists, contact your system administrator.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1060
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to save the changes made to Syslog Settings.
- Detailed Description
- The changes made to Syslog Settings cannot be saved.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1061
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to save the Syslog Settings configuration because an invalid destination address is entered.
- Detailed Description
- The Syslog Settings configuration cannot be saved because an invalid destination address is entered.
- Recommended Response Action
- Verify the destination provided is correct and try again.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1062
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to save the Syslog Settings configuration because an invalid port number is entered.
- Detailed Description
- The Syslog Settings configuration cannot be saved because an invalid port number is entered.
- Recommended Response Action
- Verify the port number is between 10 and 65535 and try again.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1064
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to update the Syslog Settings configuration because the destination address is invalid.
- Detailed Description
- The Syslog Settings configuration cannot be updated because the destination address is invalid.
- Recommended Response Action
- Verify that a destination address is entered.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1070
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to save the SNMP settings.
- Detailed Description
- The SNMP settings could not be saved.
- Recommended Response Action
- Retry the operation. If the issue persists, contact your system administrator.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1071
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to update the SNMP settings because the entered destination address arg1 is invalid.
- Arguments
- arg1 = address
- Detailed Description
- The SNMP settings cannot be updated because the entered address identified in the message s invalid.
- Recommended Response Action
- Enter a valid destination address and retry the operation.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1072
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to update the SNMP settings because both SNMPv1/v2 and SNMPv3 credentials are present in the request.
- Detailed Description
- The SNMP settings cannot be updated because both SNMPv1/v2 and SNMPv3 credentials are present in the request. Only 1 type of credential is allowed in a request.
- Recommended Response Action
- Remove either the SNMPv1v2 credentials or the SNMPv3 credentials and retry the operation.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1073
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to update the SNMP settings because no SNMP credentials are present in the request.
- Detailed Description
- The SNMP settings cannot be updated because no SNMP credentials are present in the request.
- Recommended Response Action
- Enter with SNMPv1/v2 credentials or SNMPv3 credentials and retry the operation.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1074
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to update the SNMP settings because an invalid port number arg1 is entered.
- Arguments
- arg1 = port number
- Detailed Description
- The SNMP settings cannot be updated because an invalid port number is entered as identified in the message.
- Recommended Response Action
- Enter a port number between 10 and 65535 and retry the operation.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1075
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to update the SNMP settings because the Community String is missing or empty.
- Detailed Description
- The SNMP settings cannot be updated because the Community String is missing or empty.
- Recommended Response Action
- Enter a Community String and retry the operation.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1076
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to update the SNMP settings because the entered SNMP version does not exist.
- Detailed Description
- Unable to update the SNMP settings because the entered SNMP version does not exist.
- Recommended Response Action
- Make sure the SNMP Version is set to SNMPV1 or SNMPV2 and retry the operation.
- Category
- Configuration (CAPP = Application)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1077
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to send Test Trap to IPV6 destination because IPV6 is not enabled in Network settings.
- Detailed Description
- The Test Trap cannot be send to ipv6 destination address because IPV6 is not enabled.
- Recommended Response Action
- Enable IPV6 inOpenManage Enterprise-Modular application and try to send Test Trap to IPV6 Destination.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1078
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to Send the Test Trap because the Entered Destination Address is Invalid or Not Reachable.
- Detailed Description
- Test Traps cannot be sent to the Entered Destination address because the Address is invalid or not reachable.
- Recommended Response Action
- Enter a valid destination address and retry the operation.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1080
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to save proxy information.
- Detailed Description
- The proxy information could not be saved.
- Recommended Response Action
- Retry the operation. If the issue persists, contact your system administrator.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1081
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to test the proxy information.
- Detailed Description
- The proxy information cannot be tested.
- Recommended Response Action
- Make sure that the proxy information is correct and retry the operation.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1082
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The SNMP settings cannot be updated because the entered SNMP destination address arg1 is same as appliance ip (IPV4 or IPV6) address.
- Arguments
- arg1 = address
- Detailed Description
- The SNMP settings cannot be updated because the entered SNMP destination address is same as appliance ip (IPV4 or IPV6) address.
- Recommended Response Action
- Enter SNMP destination address different from applianceip (IPV4 or IPV6) address and retry the operation.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1083
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to update the SNMP settings because for SNMPv3 credentials the username (security name) field is not present.
- Detailed Description
- The SNMP settings cannot be updated because for SNMPv3 credentials the username (security name) field is not present.
- Recommended Response Action
- Enter valid username (security name) for SNMPv3 credentials and retry the operation.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1084
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to update the SNMP settings because for SNMPv3 credentials the Auth type (Authentication Protocol) field is not present.
- Detailed Description
- The SNMP settings cannot be updated because for SNMPv3 credentials theAuth type (Authentication Protocol)field is not present.
- Recommended Response Action
- Enter validAuth type (Authentication Protocol) for SNMPv3 credentials and retry the operation.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1085
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to update the SNMP settings because for SNMPv3 credentials the authentication passphrase field is not present or invalid.
- Detailed Description
- The SNMP settings cannot be updated because for SNMPv3 credentials the authentication passphrasefield is not present or invalid.
- Recommended Response Action
- Enter valid authentication passphrase for SNMPv3 credentials and retry the operation.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1086
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to update the SNMP settings because for SNMPv3 credentials the privacy protocol field is not present or invalid.
- Detailed Description
- The SNMP settings cannot be updated because for SNMPv3 credentials the privacy protocol field is not present or invalid.
- Recommended Response Action
- Enter valid privacy protocol for SNMPv3 credentials and retry the operation.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1087
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to update the SNMP settings because for SNMPv3 credentials the privacy passphrase field is not present or invalid.
- Detailed Description
- The SNMP settings cannot be updated because for SNMPv3 credentials the privacy passphrasefield is not present or invalid.
- Recommended Response Action
- Enter valid privacy passphrase for SNMPv3 credentials and retry the operation.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1089
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The console HTTPS Share password is updated.
- Detailed Description
- Theconsole HTTPS Share password is updated.
- Recommended Response Action
- No response action required.
- Category
- Miscellaneous (CAPP = Application)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1100
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to save the SMTP Settings because an error occurred.
- Detailed Description
- An error occurred while attempting to save the SMTP Settings configuration.
- Recommended Response Action
- Retry the operation. If the issue persists, contact your system administrator.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1101
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to test the SMTP Settings because of an error.
- Detailed Description
- An error occurred while attempting to test the SMTP settings.
- Recommended Response Action
- Make sure the entered SMTP settings are correct and retry the operation.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1104
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to update the SMTP settings because the entered port number arg1 is invalid.
- Arguments
- arg1 = port
- Detailed Description
- The SMTP settings cannot be updated because the entered port number identified in the message is invalid.
- Recommended Response Action
- Enter a port number between 10 and 65535 and retry the operation.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1105
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to update the SMTP settings because the Destination Address is invalid or missing.
- Detailed Description
- The SMTP settings cannot be updated because the Destination Address is invalid or missing.
- Recommended Response Action
- Enter valid IP address or FQDN and retry the operation.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1106
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to update the SMTP settings because the entered credential is invalid or empty.
- Detailed Description
- The SMTP settings cannot be updated because the entered credential is invalid or empty.
- Recommended Response Action
- Either enter valid credentials or disable the Use Credentials option and retry the operation.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1107
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to update the SNMP settings because the request contains an invalid number of configurations. The request must contain no more than arg1 configurations but contains arg2.
- Arguments
- arg1 = expected
- arg2 = actual
- Detailed Description
- The SNMP settings cannot be updated because the request contains an invalid number of configurations as identified in the message.
- Recommended Response Action
- Enter only the required number of configurations as identified in the message and retry the operation.
- Category
- Configuration (CAPP = Application)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1108
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to update the Syslog settings because the request contains an invalid number of configurations. The request must contain no more than arg1 configurations but contains arg2.
- Arguments
- arg1 = expected
- arg2 = actual
- Detailed Description
- The Syslog settings cannot be updated because the request contains an invalid number of configurations as identified in the message.
- Recommended Response Action
- Enter only the required number of configurations as identified in the message and retry the operation.
- Category
- Configuration (CAPP = Application)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1122
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to retrieve appliance update information.
- Detailed Description
- Appliance update information could not be retrieved.
- Recommended Response Action
- Retry the operation. If the issue persists, contact your system administrator.
- Category
- Configuration (CAPP = Application)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1123
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Appliance update information retrieved successfully.
- Detailed Description
- Appliance update information retrieved successfully.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CAPP = Application)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1135
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The appliance arg1 is successfully updated.
- Arguments
- arg1 = property
- Detailed Description
- The appliance property identified in the message is successfully updated.
- Recommended Response Action
- No response action required.
- Category
- Updates (CAPP = Application)
- Severity
- Informational
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1136
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to update the appliance arg1 because of internal errors.
- Arguments
- arg1 = property
- Detailed Description
- The appliance property identified in the message cannot be updated because of internal errors.
- Recommended Response Action
- Retry the operation. If the issue persists, contact your Console administrator. Also, see the OpenManage Enterprise-Modular Users Guide available on the support site.
- Category
- Updates (CAPP = Application)
- Severity
- Warning
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1301
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to update network settings because arg1 is empty or invalid.
- Arguments
- arg1 = field
- Detailed Description
- Settings cannot be updated because the value entered is empty or invalid for the field identified in the message.
- Recommended Response Action
- Make sure that the value is valid and retry the operation.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1302
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to update the network settings because arg1.
- Arguments
- arg1 = reason info
- Detailed Description
- The network settings cannot be updated because of the reason identified in the message.
- Recommended Response Action
- Make sure that the network supports the current settings and retry the operation.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1303
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to complete the operation because the network interface is not ready.
- Detailed Description
- The operation cannot be completed because the network interface is not ready.
- Recommended Response Action
- Wait until the system is booted and retry the operation. For more information, see the OpenManage Enterprise-Modular Users Guide available on the support site.
- Category
- Configuration (CAPP = Application)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1304
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to update the address configuration because a dependent field is missing for arg1.
- Arguments
- arg1 = field
- Detailed Description
- Address configuration cannot be updated because the field value is dependent another field identified in the message.
- Recommended Response Action
- Make sure that all dependent fields contain valid content and retry the operation.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1307
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to set address configuration because the field arg1 is empty or null.
- Arguments
- arg1 = field name
- Detailed Description
- Address configuration cannot be updated because a required field identified in the message is empty or null.
- Recommended Response Action
- Make sure that the missing field is present and retry the operation.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1308
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Network address configuration is set successfully.
- Detailed Description
- Network address configuration is set successfully.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CAPP = Application)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1309
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to update the network settings because the entered payload is invalid.
- Detailed Description
- The network settings could not be updated either because the request contains invalid values or the entered values are not appropriate for the network configuration.
- Recommended Response Action
- Make sure the entered payload is valid and retry the operation. If the issue persists, contact your system administrator.
- Category
- Configuration (CAPP = Application)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1311
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The system is unable to sync time with the suggested NTP server.
- Detailed Description
- The system was not able to sync to the suggested NTP server(s) in a given period of time. Please refresh the time settings page to see the updated time source. If time source does not change, then retry the operation.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CAPP = Application)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1312
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to retrieve the Federal Information Processing Standard (FIPS) mode configuration information.
- Detailed Description
- The Federal Information Processing Standard (FIPS) mode configuration information cannot be retrieved because of internal issues.
- Recommended Response Action
- Retry the operation. If the issue persists, contact yourOpenManage Enterprise-Modular administrator.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1315
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The status of downloading the Plugin Catalog is arg1.
- Arguments
- arg1 = status
- Detailed Description
- The status of downloading the PluginCatalog is as identified in the message.
- Recommended Response Action
- No response action is required.
- Category
- Configuration (CAPP = Application)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1319
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to retrieve the source file of type arg1 because the file is not accessible.
- Arguments
- arg1 = file type
- Detailed Description
- The source file of type identified in the message cannot be retrieved because the file is not accessible.
- Recommended Response Action
- Make sure that you have entered a valid file folder path for the file type, and then retry the operation. To set the file folder path, on the OpenManage Enterprise GUI, click Application Settings > Console and Plugins > Update Settings.
- Category
- Configuration (CAPP = Application)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1320
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to retrieve the source file of type arg1 because the file does not exist.
- Arguments
- arg1 = file Type
- Detailed Description
- The source file of type identified in the message cannot be retrieved because the file does not exist.
- Recommended Response Action
- Make sure that the file exists, and then retry the operation. To make sure, on the OpenManage Enterprise GUI, click Application Settings > Console and Plugins > Update Settings.
- Category
- Configuration (CAPP = Application)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1321
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to read the Plugin Catalog file because the file signature is invalid.
- Detailed Description
- The source file of type identified in the message cannot be retrieved because the file does not exist.
- Recommended Response Action
- Make sure that a valid signed Catalog file exists, and then retry the operation. To make sure, on the OpenManage Enterprise GUI, click Application Settings > Console and Plugins > Update Settings.
- Category
- Configuration (CAPP = Application)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1322
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The action arg1 is successfully started for plugin arg2 version arg3 by the user arg4.
- Arguments
- arg1 = extension Action
- arg2 = extension Id
- arg3 = extension Version
- arg4 = user name
- Detailed Description
- The start of pluginlifecycle actions is identified in the message.
- Recommended Response Action
- No response action is required.
- Category
- Audit (CAPP = Application)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1323
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to perform the requested action because the plugin version specified is invalid.
- Detailed Description
- The request cannot be completed because the specified version does not match a version in the plugins catalog or is invalid for this request.
- Recommended Response Action
- Make sure the version specified matches the version defined in the plugins catalog.
- Category
- Configuration (CAPP = Application)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1324
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to perform the requested action because the plugin artifacts are already downloaded.
- Detailed Description
- The request cannot be completed because the artifacts for this plugin are already downloaded or are currently downloading.
- Recommended Response Action
- The plugin can be installed when the download is complete. If the downloaded artifacts need to be redownloaded, delete the previous artifacts by using the delete downloads call via PluginService/Actions/PluginService.DeleteDownloads.
- Category
- Configuration (CAPP = Application)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1325
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to perform the requested action because the plugin is already installed, and the version specified is not an upgrade.
- Detailed Description
- The request cannot be completed because the plugin is installed, and the specified version is not an upgrade for the plugin.
- Recommended Response Action
- Make sure the version specified is correct and is greater than the installed version.
- Category
- Configuration (CAPP = Application)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1326
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to perform the requested action because the plugin is not compatible with the installed version of OpenManage Enterprise.
- Detailed Description
- The request cannot be completed because the plugin is not compatible with OpenManage Enterprise.
- Recommended Response Action
- Select a plugin version compatible with OpenManage Enterprise or upgrade OpenManage Enterprise.
- Category
- Configuration (CAPP = Application)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1327
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to perform the requested action because the plugin was not found in the plugin catalog.
- Detailed Description
- The request cannot be completed because the specified plugin cannot be found in the plugin catalog.
- Recommended Response Action
- Make sure the plugins catalog is available and the specified plugin and version is valid.
- Category
- Configuration (CAPP = Application)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1328
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to perform the requested action because the plugin artifacts are not downloaded.
- Detailed Description
- The request cannot be completed because the plugin artifacts are not downloaded and are not available on the system.
- Recommended Response Action
- Make sure the plugin artifacts are downloaded by perform a download action. Make sure the download is complete before performing this action.
- Category
- Configuration (CAPP = Application)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1329
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to perform the requested action because the plugin is not installed.
- Detailed Description
- The request cannot be completed because the plugin is not installed on the system.
- Recommended Response Action
- Make sure the plugin specified is installed in OpenManage Enterprise.
- Category
- Configuration (CAPP = Application)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1330
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to perform the request action because the plugin is already arg1.
- Arguments
- arg1 = Enabled Or Disabled
- Detailed Description
- The request cannot be completed because the plugin is already in the requested state.
- Recommended Response Action
- Make sure the plugin specified is correct.
- Category
- Configuration (CAPP = Application)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1331
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to complete the action because the plugin with id owner of arg1 is either not installed or is disabled.
- Arguments
- arg1 = id Owner
- Detailed Description
- Unable to complete the action because the plugin in question is either not installed or is not enabled.
- Recommended Response Action
- Ensure that the plugin in question is installed and enabled.
- Category
- Configuration (CAPP = Application)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1332
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to uninstall or disable the arg1 plugin. arg2.
- Arguments
- arg1 = plugin Name
- arg2 = plugin Reason
- Detailed Description
- Unable to uninstall or disable the plugin due to an error.
- Recommended Response Action
- Ensure the plugin is in a state where the plugin can be disabled or uninstalled. Check the audit log for details.
- Category
- Configuration (CAPP = Application)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1333
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Plugin lifecycle action arg1 for plugin arg2 failed. Verify the update setting locations plugin artifact contents.
- Arguments
- arg1 = action
- arg2 = plugin Name
- Detailed Description
- Plugin lifecycle operation failed.
- Recommended Response Action
- Verify the contents of the plugin catalog and artifact location, download plugin artifacts and attempt operation again.
- Category
- Configuration (CAPP = Application)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1400
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to register with Dell Connectivity Services because the validity of the Access Key has expired.
- Detailed Description
- Registration to Dell connectivity Services cannot be completed because the validity of the Access Key has expired.
- Recommended Response Action
- Enter a valid Access Key and Pin, and then retry the operation.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1401
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to register with Dell Connectivity Services because the Access Key is already in use.
- Detailed Description
- Registration to Dell connectivity Services cannot be completed because the Access Key is already in use.
- Recommended Response Action
- Enter a valid Access Key and Pin, and then retry the operation.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1402
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to register with Dell Connectivity Services because the Access Key or Pin is invalid.
- Detailed Description
- Registration to Dell connectivity Services cannot be completed because the Access Key or Pin is invalid.
- Recommended Response Action
- Enter a valid Access Key and Pin, and then retry the operation.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1403
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to register with Dell Connectivity Services because the Access Key is not associated with the correct software product.
- Detailed Description
- Registration to Dell connectivity Services cannot be completed because the Access Key is not associated with the correct software product.
- Recommended Response Action
- Enter a valid Access Key and Pin, and then retry the operation.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1404
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to perform the operation because network connection could not be started with Dell Connectivity Services.
- Detailed Description
- The operation cannot be performed because network connection could not be started with Dell Connectivity Services.
- Recommended Response Action
- Retry the operation. If the issue persists, contact your system administrator.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1405
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to process the request because of an error in communication with the Dell Connectivity Services: arg1.
- Arguments
- arg1 = scgErrorCode
- Detailed Description
- The request cannot be processed because of an error in communication with the Dell Connectivity Services.
- Recommended Response Action
- Retry the operation. If the issue persists, contact your system administrator.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1406
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to deregister with Dell Connectivity Services because of other plugins are using the service.
- Detailed Description
- Deregistartion can not be completed due to other plugins are still connected to Dell Connectivity Services.
- Recommended Response Action
- Uninstall the plugins which are using Dell Connectivity Services and retry the operation.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1407
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to complete the Proxy Connection because of an invalid proxy details or network issue.
- Detailed Description
- The operation cannot be performed because requested proxy details are invalid or network issues.
- Recommended Response Action
- Retry the operation with valid proxy details. If the issue persists, contact your system administrator.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1410
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The appliance is successfully registered to the Dell Connectivity services.
- Detailed Description
- The appliance is successfully registered to the Dell Connectivity services.
- Recommended Response Action
- No response action required.
- Category
- Audit (CAPP = Application)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1411
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The appliance is successfully deregistered from the Dell Connectivity services.
- Detailed Description
- The appliance is successfully deregistered from the Dell Connectivity services.
- Recommended Response Action
- No response actionis required.
- Category
- Audit (CAPP = Application)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1412
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to deregister because of communication error with Dell Connectivity Services.
- Detailed Description
- The request cannot be processed because of an error in acommunication with the Dell Connectivity Services.
- Recommended Response Action
- Retry the operation. If the issue persists, contact your system administrator.
- Category
- Configuration (CAPP = Application)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP1413
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Registration to Dell Connectivity Services is required to perform this operation.
- Detailed Description
- Complete the registration by usingRegistration API to get the access to the resources under Dell Connectivity Services.
- Recommended Response Action
- Retry the operation with valid registration to Dell Connectivity Services.
- Category
- Configuration (CAPP = Application)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP2000
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to sync to NTP server 1.
- Detailed Description
- Unable to sync to the NTP server because the NTP Server identified in the message is not reachable.
- Recommended Response Action
- Check and correct the entered URL or IP for NTP Server as identified in the message. Ensure that the entered server identity can be resolved, is up and running, and is able to be accessed from the public network.
- Category
- Configuration (CAPP = Application)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP2001
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to sync to NTP server 2.
- Detailed Description
- Unable to sync to the NTP server because the NTP Server identified in the message is not reachable.
- Recommended Response Action
- Check and correct the entered URL or IP for NTP Server as identified in the message. Ensure that the entered server identity can be resolved, is up and running, and is able to be accessed from the public network.
- Category
- Configuration (CAPP = Application)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP2002
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to sync to NTP server 3.
- Detailed Description
- Unable to sync to the NTP server because the NTP Server identified in the message is not reachable.
- Recommended Response Action
- Check and correct the entered URL or IP for NTP Server as identified in the message. Ensure that the entered server identity can be resolved, is up and running, and is able to be accessed from the public network.
- Category
- Configuration (CAPP = Application)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP2003
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Time synced successfully on NTP server 1.
- Detailed Description
- Time synced successfully on NTP server identified in the message.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CAPP = Application)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP2004
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Time synced successfully on NTP server 2.
- Detailed Description
- Time synced successfully on NTP server identified in the message.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CAPP = Application)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP2005
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Time synced successfully on NTP server 3.
- Detailed Description
- Time synced successfully on NTP server identified in the message.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CAPP = Application)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP9049
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The Samba server settings arg1 are successfully changed by the user arg2.
- Arguments
- arg1 = setting
- arg2 = user
- Detailed Description
- The Samba server settings are successfully changed by the user identified in the message.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CAPP = Application)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP9055
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The status of downloading the Plugin Catalog is arg1.
- Arguments
- arg1 = arg1
- Detailed Description
- The status of downloading the PluginCatalog is as identified in the message.
- Recommended Response Action
- No response action is required.
- Category
- Configuration (CAPP = Application)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP9085
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to uninstall or disable Power Manager on the OpenManage Enterprise because policies and Emergency Power Reduction are active.
- Detailed Description
- The Power Manager on the OpenManage Enterprise cannot be removed or disassociated from the Power Manager because policies and Emergency Power Reduction are active as identified in the message.
- Recommended Response Action
- Disassociate or disable all the policies and Emergency Power Reduction features, and then retry the operation.
- Category
- Configuration (CAPP = Application)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP9087
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to update the Security Policy Message because the provided message is greater than the maximum length of 512 characters.
- Detailed Description
- The Security Message on OpenManage Enterprise-Modular is limited to a maximum of 512 characters.
- Recommended Response Action
- Shorten the security policy message to make is shorter than 512 characters and retry the operation.
- Category
- Configuration (CAPP = Application)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CAPP9088
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Security Policy Message modified.
- Detailed Description
- Security Policy Message modified.
- Recommended Response Action
- No response action required.
- Category
- Audit (CAPP = Application)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\