PowerEdge Servers Error and Event Messages Reference Guide
CLIC—License Management Event Messages
CLIC0001
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to import the license file from arg1 into OpenManage Enterprise because the file type is not supported.
- Arguments
- arg1 = fileName
- Detailed Description
- The license file identified in the message cannot be imported because the file type is not supported.
- Recommended Response Action
- Retry the operation using a supported file type. Files of type XML, ZIP, and TAR are supported.
- Category
- Configuration (CLIC = License Management)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CLIC0002
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to import the license file from arg1 into OpenManage Enterprise because the signature is invalid.
- Arguments
- arg1 = fileName
- Detailed Description
- The license file identified in the message cannot be imported because the signature is not valid.
- Recommended Response Action
- Retry the operation using a license file with a valid signature.
- Category
- Configuration (CLIC = License Management)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CLIC0003
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to import the license file from arg1 into OpenManage Enterprise because the same license already exists in the system.
- Arguments
- arg1 = fileName
- Detailed Description
- The license file identified in the message cannot be imported because the same license is already present in the system.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CLIC = License Management)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CLIC0004
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to import the license file from arg1 into OpenManage Enterprise because it is an evaluation license.
- Arguments
- arg1 = fileName
- Detailed Description
- The license file identified in the message cannot be imported because the term of the license is evaluation. Evaluation licenses are not supported in OpenManage Enterprise.
- Recommended Response Action
- Retry the operation using a perpetual license.
- Category
- Configuration (CLIC = License Management)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CLIC0005
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to import the license file from arg1 into OpenManage Enterprise because the license is not bound to the service tag of a device.
- Arguments
- arg1 = fileName
- Detailed Description
- The license file identified in the message cannot be imported because it is not bound to the service tag of a device.
- Recommended Response Action
- Retry the operation using a license that is bound to the service tag of a device.
- Category
- Configuration (CLIC = License Management)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CLIC0006
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to import the license file from arg1 into OpenManage Enterprise because the license file is either corrupted or invalid.
- Arguments
- arg1 = fileName
- Detailed Description
- The license file identified in the message cannot be imported because it is either corrupted or invalid.
- Recommended Response Action
- Retry the operation using a valid license file.
- Category
- Configuration (CLIC = License Management)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CLIC0007
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to export the license file to arg1 because the connection to the share location is unsuccessful.
- Arguments
- arg1 = address
- Detailed Description
- The license file cannot be exported to the share location identified in the message because it is not reachable over the network by OpenManage Enterprise.
- Recommended Response Action
- Retry the operation using a share location that is reachable over the network by OpenManage Enterprise.
- Category
- Configuration (CLIC = License Management)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CLIC0008
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to import the license file from arg1 into OpenManage Enterprise because the file is protected with a password.
- Arguments
- arg1 = fileName
- Detailed Description
- The license file identified in the message cannot be imported because it is protected with a password.
- Recommended Response Action
- Retry the operation after archiving the license files without password protection.
- Category
- Configuration (CLIC = License Management)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CLIC0009
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to export the license file to arg1 because write permission to the share location is denied.
- Arguments
- arg1 = address
- Detailed Description
- The license file cannot be exported to the share location identified in the message because write permission to the share location is denied.
- Recommended Response Action
- Retry the operation using a share location that has write permission.
- Category
- Configuration (CLIC = License Management)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CLIC0010
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to complete the action because the target device arg1 is not discovered via the preferred protocol.
- Arguments
- arg1 = deviceName
- Detailed Description
- The license file cannot be deployed on the device because the because the device is not discovered using the preferred protocol. Please refer to the user guide for more information on how to discover the device using the preferred protocol.
- Recommended Response Action
- Retry the operation after discovering the device using the preferred protocol.
- Category
- Configuration (CLIC = License Management)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CLIC0011
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to deploy the license on the device arg1 because the device is not reachable.
- Arguments
- arg1 = deviceName
- Detailed Description
- The license action cannot be performed on the device because the device is not reachable from OpenManage Enterprise.
- Recommended Response Action
- Retry the operation after ensuring network connectivity to the device from OpenManage Enterprise.
- Category
- Configuration (CLIC = License Management)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CLIC0012
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to deploy the license because the license arg1 is already installed on the device arg2.
- Arguments
- arg1 = entitlementId
- arg2 = deviceName
- Detailed Description
- The license cannot be deployed on the device because the same license is already deployed on the device.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CLIC = License Management)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CLIC0013
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to deploy the license because the device having the service tag arg1 is not discovered in OpenManage Enterprise.
- Arguments
- arg1 = serviceTag
- Detailed Description
- The license cannot be deployed because the device having the bound service tag is not discovered in OpenManage Enterprise.
- Recommended Response Action
- Retry the operation after discovering the device having the service tag bound to the license.
- Category
- Configuration (CLIC = License Management)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CLIC0014
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to remove license arg1 from device arg2 because the license is not installed on the device.
- Arguments
- arg1 = entitlementId
- arg2 = deviceName
- Detailed Description
- The license <entitlementId> cannot be removed from device <deviceName> because the license is not installed on the device. Ensure that the license is installed on the device before attempting to remove it.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CLIC = License Management)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CLIC0015
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to connect to Dell Online because of an error in License Binding Service.
- Detailed Description
- Connection to Dell Online is not possible because of an error in execution of License Binding Service. Please refer to the user guide for more information on network requirements and troubleshooting steps.
- Recommended Response Action
- Retry the operation after ensuring necessary network connectivity to OpenManage Enterprise.
- Category
- Configuration (CLIC = License Management)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CLIC0016
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to connect to Dell Digital Locker because the connection is already established.
- Detailed Description
- The connection to Dell Digital Locker cannot not be established because the connection is already established.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CLIC = License Management)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CLIC0017
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to disconnect from Dell Online because the current connection is in use.
- Detailed Description
- The connection to Dell Online cannot be ended because a license binding task currently in execution is using it.
- Recommended Response Action
- Retry the operation after the ongoing license binding tasks are completed.
- Category
- Configuration (CLIC = License Management)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CLIC0018
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to bind the service tag with entitlement because sufficient number of entitlements are not available.
- Detailed Description
- Binding process cannot be performed because the service tags provided in the request exceeds the count of entitlements available in Dell Digital Locker.
- Recommended Response Action
- Retry the operation by providing number of service tags that are less than or equal to the count entitlements available in Dell Digital Locker.
- Category
- Configuration (CLIC = License Management)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CLIC0019
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to bind the service tags with entitlement because the connection to Dell Online is ended.
- Detailed Description
- Binding of service tags with entitlement cannot be performed because connection to Dell Online has ended or expired.
- Recommended Response Action
- Retry the operation after reconnecting to Dell Online.
- Category
- Configuration (CLIC = License Management)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CLIC0020
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to deploy the license because license arg1 is not compatible with the device arg2.
- Arguments
- arg1 = licenseType
- arg2 = serviceTag
- Detailed Description
- The license identified in the message cannot be deployed on the device because the license in not compatible with the device.
- Recommended Response Action
- Retry the operation using a compatible license type.
- Category
- Configuration (CLIC = License Management)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CLIC0021
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- A job is initiated to import the license file arg1.
- Arguments
- arg1 = filename
- Detailed Description
- A job is initiated to import the licenses from file identified in the message. Visit Jobs page to view status of the job.
- Recommended Response Action
- No response action required.
- Category
- Audit (CLIC = License Management)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CLIC0022
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- arg1 license files are successfully imported.
- Arguments
- arg1 = count
- Detailed Description
- License are successfully imported from the provided file.
- Recommended Response Action
- No response action required.
- Category
- Audit (CLIC = License Management)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CLIC0023
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- One or more licences are successfully deleted.
- Detailed Description
- One or more licenses are successfully deleted from OpenManage Enterprise.
- Recommended Response Action
- No response action required.
- Category
- Audit (CLIC = License Management)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CLIC0024
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- A job is initiated to export the licenses.
- Detailed Description
- A job is initiated to export selected licenses to the network share location.
- Recommended Response Action
- No response action required.
- Category
- Audit (CLIC = License Management)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CLIC0025
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- arg1 licenses are successfully exported.
- Arguments
- arg1 = count
- Detailed Description
- The selected licenses are successfully exported to the network share location.
- Recommended Response Action
- No response action required.
- Category
- Audit (CLIC = License Management)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CLIC0026
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- A job is initiated to deploy arg1 licenses on the devices.
- Arguments
- arg1 = count
- Detailed Description
- A job is initiated to deploy selected licenses on the devices.
- Recommended Response Action
- No response action required.
- Category
- Audit (CLIC = License Management)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CLIC0027
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- arg1 license files are successfully deployed.
- Arguments
- arg1 = count
- Detailed Description
- The selected licenses are successfully deployed on the devices.
- Recommended Response Action
- No response action required.
- Category
- Audit (CLIC = License Management)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CLIC0028
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- A job is initiated to remove arg1 licenses from the device arg2.
- Arguments
- arg1 = count
- arg2 = deviceName
- Detailed Description
- A job is initiated to remove selected licenses from the device.
- Recommended Response Action
- No response action required.
- Category
- Audit (CLIC = License Management)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CLIC0029
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- arg1 licenses are successfully removed from the device arg2.
- Arguments
- arg1 = count
- arg2 = deviceName
- Detailed Description
- The selected licenses are successfully removed from the target devices.
- Recommended Response Action
- No response action required.
- Category
- Audit (CLIC = License Management)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CLIC0030
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- OpenManage Enterprise is successfully connected to Dell Digital Locker.
- Detailed Description
- OpenManage Enterprise is successfully connected to Dell Digital Locker.
- Recommended Response Action
- No response action required.
- Category
- Audit (CLIC = License Management)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CLIC0031
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- OpenManage Enterprise is successfully disconnected from Dell Online.
- Detailed Description
- OpenManage Enterprise is successfully disconnected from Dell Online.
- Recommended Response Action
- No response action required.
- Category
- Audit (CLIC = License Management)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CLIC0032
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- A job is initiated to bind entitlements with the device service tags.
- Detailed Description
- A job is initiated to bind entitlements with the device service tags. Visit Jobs page to view status of the job.
- Recommended Response Action
- No response action required.
- Category
- Audit (CLIC = License Management)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CLIC0033
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- arg1 entitlements are successfully bounded to device service tags.
- Arguments
- arg1 = count
- Detailed Description
- The selected device service tags are successfully bounded to entitlements.
- Recommended Response Action
- No response action required.
- Category
- Audit (CLIC = License Management)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CLIC0034
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- A job is initiated to bind entitlements with the device service tags and deploy licenses to the devices.
- Detailed Description
- A job is initiated to bind entitlements with device service tags and deploy licenses on those devices. Visit Jobs page to view status of the job.
- Recommended Response Action
- No response action required.
- Category
- Audit (CLIC = License Management)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CLIC0035
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- arg1 licenses are successfully bound and deployed on the devices.
- Arguments
- arg1 = count
- Detailed Description
- Entitlements are successfully bound to the device service tag, and licenses are deployed on the device.
- Recommended Response Action
- No response action required.
- Category
- Audit (CLIC = License Management)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CLIC0036
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- arg1 licenses are successfully downloaded.
- Arguments
- arg1 = count
- Detailed Description
- Licenses are successfully downloaded from Dell Digital Locker.
- Recommended Response Action
- No response action required.
- Category
- Audit (CLIC = License Management)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CLIC0037
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to perform the operation as one or more servers do not have a valid Integrated Rack license. As a result, arg1 is not in a Licensed state.
- Arguments
- arg1 = rack name
- Detailed Description
- Unable to perform the operation on the rack physical group because one or more servers do not have a valid Integrated Rack license.
- Recommended Response Action
- Ensure all compute servers in the rack have a valid Integrated Rack license to unlock the restricted features.
- Category
- Configuration (CLIC = License Management)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CLIC0038
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Integrated Rack license on device with service tag arg1 will expire in 3 months on arg2.
- Arguments
- arg1 = tag
- arg2 = date
- Detailed Description
- The Integrated Rack license on the device is expiring in 3 months.
- Recommended Response Action
- Renew the Integrated Rack license to maintain Integrated Rack features.
- Category
- System Health (CLIC = License Management)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CLIC0039
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Integrated Rack license on device with service tag arg1 will expire in 1 month on arg2.
- Arguments
- arg1 = tag
- arg2 = date
- Detailed Description
- The Integrated Rack license on the device is expiring in 1 month.
- Recommended Response Action
- Renew the Integrated Rack license to maintain Integrated Rack features.
- Category
- System Health (CLIC = License Management)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CLIC0040
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Integrated Rack license on device with service tag arg1 has expired.
- Arguments
- arg1 = tag
- Detailed Description
- The Integrated Rack license on the device is expired.
- Recommended Response Action
- Install a new Integrated Rack license to restore Integrated Rack features.
- Category
- System Health (CLIC = License Management)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CLIC0041
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Integrated Rack arg1 has lost its licensed state due to license expiration or removal.
- Arguments
- arg1 = rackName
- Detailed Description
- The Integrated Rack has lost its license state due to license expiration or removal.
- Recommended Response Action
- Install new Integrated Rack licenses on all servers in the rack to restore the Licensed state.
- Category
- System Health (CLIC = License Management)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CLIC0042
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to deploy the Integrated Rack license on the device with service tag arg1.
- Arguments
- arg1 = tag
- Detailed Description
- Unable to deploy the Integrated Rack license on the device.
- Recommended Response Action
- Verify that the device is reachable, responding, and its credentials are unchanged.
- Category
- Audit (CLIC = License Management)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\