PowerEdge Servers Error and Event Messages Reference Guide
GMGR—Group Manager Event Messages
GMGR0000
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The iDRAC Group Manager feature is disabled.
- Detailed Description
- The iDRAC Group Manager feature is disabled. iDRAC will no longer be able to create or join iDRAC local groups. However, all the earlier settings of Group Manager are preserved. To enable the Group Manager, log in to iDRAC. On the Dashboard page, from the Open Group Manager menu, select Enable Group Manager.
- Recommended Response Action
- No response action is required.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Informational
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0001
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The iDRAC Group Manager feature is enabled.
- Detailed Description
- The iDRAC Group Manager feature is enabled. All the iDRAC Group Manager features, if configured earlier to a group, will be preserved. iDRAC will be able to create or join iDRAC local groups.
- Recommended Response Action
- No response action is required.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Informational
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0002
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The iDRAC local group arg1 is successfully created.
- Arguments
- arg1 = groupname
- Detailed Description
- The iDRAC local group with a name identified in the message is successfully created. Current iDRAC continues to be the Primary Controller of iDRAC local group.
- Recommended Response Action
- No response action is required.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Informational
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0003
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The iDRAC local group arg1 is successfully deleted.
- Arguments
- arg1 = group name
- Detailed Description
- The iDRAC local group with a name identified in the message is successfully deleted. The deleted iDRAC will be shown as available in other groups views for forming a group.
- Recommended Response Action
- No response action is required.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Informational
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0004
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The iDRAC local group is successfully renamed to arg1.
- Arguments
- arg1 = new name
- Detailed Description
- The iDRAC local group is successfully renamed to new name identified in the message.
- Recommended Response Action
- No response action is required.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Informational
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0005
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- iDRAC arg1 successfully joined the local iDRAC Group arg2.
- Arguments
- arg1 = service tag
- arg2 = groupName
- Detailed Description
- The iDRAC with the Service Tag identified in the message has successfully joined the local iDRAC group identified in the message.
- Recommended Response Action
- No response action is required.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0006
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- iDRAC successfully removed itself from the local group arg1.
- Arguments
- arg1 = groupname
- Detailed Description
- The iDRAC successfully removed itself from the local group identified in the message. The removed iDRAC can now join any available local groups.
- Recommended Response Action
- No response action is required.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0007
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The server arg1 has successfully joined the local iDRAC group arg2.
- Arguments
- arg1 = Service Tag
- arg2 = group name
- Detailed Description
- The server having the Service Tag identified in the message has successfully joined the local iDRAC group identified in the message. The server can now be managed from the local group.
- Recommended Response Action
- No response action is required.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0008
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The server arg1 is successfully removed from the group arg2 by the Group Manager administrator.
- Arguments
- arg1 = Service Tag
- arg2 = group name
- Detailed Description
- The iDRAC having the Service Tag identified in the message has been successfully removed from the local iDRAC group identified in the message.
- Recommended Response Action
- No response action is required.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0009
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The server arg1 is successfully assigned as the Primary Controller of the group arg2.
- Arguments
- arg1 = Service Tag
- arg2 = group name
- Detailed Description
- The server having the Service Tag identified in the message is assigned as the Primary Controller of the group identified in the message. Hereafter, all group tasks can be done from the Primary Controller.
- Recommended Response Action
- No response action is required.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0010
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to complete the operation as iDRAC is unable to communicate within the server group either because service tag is not configured, group passcode has changed, group was deleted and does not exist or network is disconnected from the primary server.
- Detailed Description
- iDRAC is unable to communicate within the server group because either the service tag is not configured, group passcode has changed, group was deleted and does not exist or network cable is disconnected from the Primary Controller.
- Recommended Response Action
- Make sure that the group was not deleted prior or cabling of all iDRAC servers is correct or server has a configured service tag. If the issue persists, try disabling and reenabling the group manager or reset the IDRAC.
- Category
- Audit (GMGR = Group Manager)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0011
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The Group Manager identified a Secondary Controller for the local group.
- Detailed Description
- The Group Manager identified a Secondary Controller for the local group.
- Recommended Response Action
- No response action is required.
- Category
- Audit (GMGR = Group Manager)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0012
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to create new iDRAC local group either because a group with the same name already exists, Service tag not setup for the server or there is an error in network connection.
- Detailed Description
- The new iDRAC local group cannot be created in Group Manager either because a group with the same name already exists, Service tag not setup for the system or there is an error in network connection.
- Recommended Response Action
- Do any one of the following and retry the operation: a) Check if another group with the same name appears in the Group Manager Discovered Groups view. b) Verify the system has a servicetag setup c) Verify your network settings. d) Restart iDRAC.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0013
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to delete the iDRAC local group arg1 because of an internal issue in the Primary Group Controller.
- Arguments
- arg1 = group name
- Detailed Description
- The iDRAC local group identified in the message cannot be deleted because of an internal issue in the Primary Group Controller.
- Recommended Response Action
- Retry the operation. If the issue persists, restart the iDRAC.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0014
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to rename the iDRAC local group to arg1 either because a group already exists with the same name or there is an internal issue in the Primary Group Controller.
- Arguments
- arg1 = new name
- Detailed Description
- The iDRAC local group cannot be renamed to the new name identified in the message either because a group already exists with the same name or there is an internal issue in the Primary Group Controller.
- Recommended Response Action
- Do any one of the following and retry the operation: a) Check if another group with the same name appears in the Group Manager Discovered Groups view. b) Restart iDRAC.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0015
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to add iDRAC to local group arg1 because the maximum possible iDRACs are already added to group.
- Arguments
- arg1 = new name
- Detailed Description
- The iDRAC cannot be added to local group identified in the message because the maximum possible iDRACs are already added to group.
- Recommended Response Action
- Remove existing iDRAC(s) from the local group to free up slots. If there are more than the maximum possible iDRACs, consider upgrading to OpenManage Consoles.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0016
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- arg1 is unable to join the iDRAC local group arg2 either because the Group passcode is incorrect, group already has the max allowed iDRACs, iDRAC already part of another group, group name does not exist, or issues in network connection.
- Arguments
- arg1 = Service Tag
- arg2 = group name
- Detailed Description
- The Service Tag identified in the message could not join the iDRAC local group identified in the message either because the Group passcode entered is incorrect, Group passcode is temporarily locked out, local group already has the max allowed iDRACs, or issues in network connection.
- Recommended Response Action
- Do any one of the following and retry the operation: a) Enter correct Group Passcode. b) Remove existing iDRAC(s) from the local group. Consider upgrading to a supported console if there are more than the maximum iDRACs. c) Verify the network cabling connections. d) Wait for five minutes and retry login.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0017
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to remove the group member arg1 from group arg2 because a group job is in progress with in the group.
- Arguments
- arg1 = Service Tag
- arg2 = group name
- Detailed Description
- The group member identified in the message cannot be removed from group identified in the message because a group job is in progress with in the group. Retry the operation after the group job is complete.
- Recommended Response Action
- Log in to the group manager and track the progress of the group task. Retry the operation once the group task is completed.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0018
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The group job arg1 of type arg2 is rescheduled.
- Arguments
- arg1 = task ID
- arg2 = task type
- Detailed Description
- The group job identified in the message is successfully rescheduled.
- Recommended Response Action
- No response action is required.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0019
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The group job arg1 of type arg2 is stopped.
- Arguments
- arg1 = task ID
- arg2 = task type
- Detailed Description
- The group job identified in the message is successfully stopped. The job details can be viewed in the Group Manager job view.
- Recommended Response Action
- No response action is required.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0020
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The group job arg1 of type arg2 is cancelled.
- Arguments
- arg1 = task ID
- arg2 = task type
- Detailed Description
- The group job identified in the message is successfully cancelled.
- Recommended Response Action
- No response action is required.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0021
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The group job arg1 of type arg2 is rerunning a failed operation per user request.
- Arguments
- arg1 = task ID
- arg2 = task type
- Detailed Description
- The group job identified in the message is rerunning a failed operation on the basis of a user request.
- Recommended Response Action
- No response action is required.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0022
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The group job arg1 of type arg2 is successfully completed.
- Arguments
- arg1 = task ID
- arg2 = task type
- Detailed Description
- The group job identified in the message is successfully completed.
- Recommended Response Action
- No response action is required.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0023
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The group job arg1 of type arg2 is completed but with errors.
- Arguments
- arg1 = task ID
- arg2 = task type
- Detailed Description
- The group job identified in the message is completed but with errors. The job details can be viewed in the Group Manager job view.
- Recommended Response Action
- Review the error details in Group Manager job view and rerun the operation if required.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0024
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The group passcode is successfully changed.
- Detailed Description
- The group passcode is successfully changed.
- Recommended Response Action
- No response action is required.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0025
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to complete the group job arg1 of type arg2 on the iDRAC arg3.
- Arguments
- arg1 = task ID
- arg2 = task type
- arg3 = Service Tag
- Detailed Description
- The group job identified in the message could not be completed.
- Recommended Response Action
- See the job details in the iDRAC Group Manager job view, and then retry the operation if required.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0026
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to modify the group passcode because one or more iDRACs did not respond within 48 hours.
- Detailed Description
- The group passcode cannot be modified because one or more iDRACs did not respond within 48 hours.
- Recommended Response Action
- Check the group job ID for information about the failed iDRACs in the Group Manager job view. Check network connection and system health of each iDRAC from the GUI. Remove the iDRAC(s) from the group and rejoin the group by using new passcode.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0027
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to modify the local group passcode.
- Detailed Description
- The group passcode could not be modified.
- Recommended Response Action
- Log in to the iDRAC as administrator, exit the local group, and then rejoin by using the new passcode. If the issue persists, restart iDRAC and retry the operation.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0028
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to complete the configuration clone operation either because of a firmware mismatch between Primary Group Controller and Group Member or because of network issues.
- Detailed Description
- The configuration clone operation cannot be completed either because of a firmware mismatch between Primary Group Controller and Group Member or because of network issues.
- Recommended Response Action
- See iDRAC Group Manager job view for information about recommended correction action. In case of a firmware mismatch, ensure the firmware versions match each other by performing a firmware update.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0029
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The iDRAC arg1 is successfully ignored from the Group Managers autodiscovery.
- Arguments
- arg1 = Service Tag
- Detailed Description
- The iDRAC identified in the message is successfully ignored from the Group Managers autodiscovery, and then added to the Ignore list.
- Recommended Response Action
- No response action is required.
- Category
- Audit (GMGR = Group Manager)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0030
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The iDRAC local group passcode is successfully changed.
- Detailed Description
- The passcode for joining iDRAC local group is successfully changed.
- Recommended Response Action
- No response action is required.
- Category
- Audit (GMGR = Group Manager)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0031
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The iDRAC local group Secondary Controller arg1 is unavailable.
- Arguments
- arg1 = Service Tag
- Detailed Description
- The Secondary Controller iDRAC is unavailable. Group redundancy is degraded. The group automatically selects a Secondary Controller after 10 minutes.
- Recommended Response Action
- No response action is required.
- Category
- Audit (GMGR = Group Manager)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0032
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The iDRAC arg1 is successfully removed from the Ignore list.
- Arguments
- arg1 = Service Tag
- Detailed Description
- The iDRAC identified in the message is successfully removed from the Ignore list.
- Recommended Response Action
- No response action is required.
- Category
- Audit (GMGR = Group Manager)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0033
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- A new group job arg1 is successfully created for arg2. The job progress can be viewed in the Group Manager job view.
- Arguments
- arg1 = task ID
- arg2 = task type
- Detailed Description
- The new group job identified in the message is successfully created.
- Recommended Response Action
- No response action is required.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0034
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The group job arg1 is successfully deleted.
- Arguments
- arg1 = task ID
- Detailed Description
- The group job identified in the message is successfully deleted.
- Recommended Response Action
- No response action is required.
- Category
- Audit (GMGR = Group Manager)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0035
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The group job arg1 is successfully cancelled.
- Arguments
- arg1 = task ID
- Detailed Description
- The group job identified in the message is successfully cancelled.
- Recommended Response Action
- No response action is required.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0036
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to delete the group job arg1 of type arg2 because the job is running.
- Arguments
- arg1 = task ID
- arg2 = task type
- Detailed Description
- The group job identified in the message can not be deleted because the job is actively running.
- Recommended Response Action
- Wait for the job to complete or stop it if it is actively running.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0037
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to reschedule the group job arg1 of type arg2 because the job is actively running.
- Arguments
- arg1 = task ID
- arg2 = task type
- Detailed Description
- The group job identified in the message cannot be deleted because the job is running.
- Recommended Response Action
- Wait for the job to complete and retry the operation. Else, stop the job if running and retry the operation.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0038
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The iDRAC local group could not identify a Secondary Controller either because of firmware incompatibility between primary controller and members, or because the local group does not have a second member to select.
- Detailed Description
- The iDRAC local group could not identify a Secondary Controller either because of firmware incompatibility between primary controller and members, or because the local group does not have a second member to select.
- Recommended Response Action
- To enable redundancy, make sure that there is at least one more member that has the supported firmware version for the Controller capability.
- Category
- Audit (GMGR = Group Manager)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0039
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to complete the operation because of an internal error or timeout to connect with the primary controller.
- Detailed Description
- The operation cannot be completed because of an internal error or timeout connecting with the primary controller.
- Recommended Response Action
- Reset the iDRAC and retry the operation. To reset the iDRAC by using RACADM command line interface (CLI), enter "racadm racreset". To reset by using iDRAC graphical user interface (GUI), on the iDRAC homepage, click Maintenance Diagnostics Reset iDRAC.
- Category
- Audit (GMGR = Group Manager)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0040
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to stop the group job arg1 of type arg2 because the group job is not an actively running task.
- Arguments
- arg1 = task ID
- arg2 = task type
- Detailed Description
- The group job identified in the message cannot be stopped because it is not in the active state. Scheduled and completed group jobs cannot be stopped.
- Recommended Response Action
- No response action is required.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0041
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to retry the group job arg1 of type arg2 because the group job is not in an error state.
- Arguments
- arg1 = task ID
- arg2 = task type
- Detailed Description
- The group job identified in the message cannot be retried because the group job is not in an error state. Only failed or errored group job shall be retried.
- Recommended Response Action
- No response action is required.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0042
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to start the requested operation on the group job arg1 of type arg2 because the operation is not supported.
- Arguments
- arg1 = task ID
- arg2 = task type
- Detailed Description
- The group job identified in the message cannot be started because the operation is not supported.
- Recommended Response Action
- No response action is required.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0043
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to schedule a group job of type arg1 because maximum number of group jobs are already created.
- Arguments
- arg1 = task type
- Detailed Description
- The group job identified in the message cannot be scheduled because the maximum number of group jobs are already created. A maximum of 50 group jobs of all states are maintained by the group manager.
- Recommended Response Action
- Delete any completed group job and retry the operation.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0044
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to start a system configuration job of type arg1 because a group configuration job is already in progress. The job status is arg2.
- Arguments
- arg1 = task type
- arg2 = status
- Detailed Description
- The group job identified in the message cannot be completed because a group job is already in progress.
- Recommended Response Action
- Wait for the group configuration job to get completed and retry the operation.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0045
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to cancel the group job arg1 of type arg2 because it is not a job in scheduled state.
- Arguments
- arg1 = task ID
- arg2 = task type
- Detailed Description
- The group job cannot be canceled because it is not in the scheduled state. Active and completed group jobs cannot be canceled.
- Recommended Response Action
- No response action is required.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0046
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The group member is unavailable or turned off.
- Detailed Description
- The group job at the member level cannot be started either because the group member is unavailable or turned off.
- Recommended Response Action
- Wait for the group member to be available and rerun the job.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0047
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The group job is either stopped by a user action or failed at the member level.
- Detailed Description
- The group job is either stopped by a user action or failed at the member level.
- Recommended Response Action
- Do the following and rerun the job: 1) Check the group job rollup status to see if the job is stopped by the user. If yes, rerun the job if required. 2) If not, review the job execution details in the Lifecycle Log details of the member iDRAC. By using the iDRAC graphical user interface (GUI), on the home page, click Maintenance > Lifecycle Log. By using command line interface (CLI), enter the RACADM command "racadm lclog view".
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0048
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The group job is completed, but with errors.
- Detailed Description
- The group job at the member level is completed but with errors. Review the job execution details at member iDRAC lifecycle log.
- Recommended Response Action
- Review the job execution details at member iDRAC lifecycle log. Rerun the job if required after addressing any action items.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0049
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The Discovered Servers are not detected in the current network configuration.
- Detailed Description
- The Discovered Servers are not detected in the current network configuration.
- Recommended Response Action
- No response action is required.
- Category
- Audit (GMGR = Group Manager)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0050
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- There are no jobs present in the current group.
- Detailed Description
- There are no jobs present in the current group.
- Recommended Response Action
- No response action is required.
- Category
- Audit (GMGR = Group Manager)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0051
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to complete the operation because Grouped Servers are not detected in the group.
- Detailed Description
- The operation cannot be completed because Grouped Servers are not detected in the group.
- Recommended Response Action
- Wait for some time, because the group initialization may take time. If the issue persists, do the following: 1) Verify that the group was not deleted by reviewing lifecycle logs. 2) Disable, and then enable the Group Manager by using the iDRAC home page. 3) Make sure that network connections are correct. 4) Log out, and then log in to the iDRAC Group Manager. If the issue persists, contact your service provider.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0052
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to determine the current iDRAC Group Manager role because of an internal error.
- Detailed Description
- The role of current iDRAC Group Manager cannot be determined because of an internal error.
- Recommended Response Action
- Wait for some time and try again, Do the following if issue persists: 1) Disable and then enable the Group Manager by using the iDRAC home page. 2) Make sure that network connections are correct. 3) Restart the iDRAC. If the issue still persists, contact your service provider.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0053
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- A duplicate group is detected.
- Detailed Description
- A duplicate group is detected.
- Recommended Response Action
- Do any one of the following: 1) Change the current group name. 2) Log in to the other group and change the other groups name. If the issue persists, contact your service provider.
- Category
- Audit (GMGR = Group Manager)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0054
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to start the operation by opening the Group Manager because either the primary or secondary servers are unavailable.
- Detailed Description
- The operation cannot be started by opening the Group Manager because either the primary or secondary servers are unavailable.
- Recommended Response Action
- Do any one of the following: 1) Wait 10 minutes and retry the operation. 2) If the issue persists, delete the existing group and create a new group.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0055
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to access the Group Manager because of insufficient privileges.
- Detailed Description
- The Group Manager cannot be accessed because of insufficient privileges to the logged in user.
- Recommended Response Action
- Contact the system administrator to get necessary privileges. For more information about user privileges, see the Online help by pressing F1, or see the iDRAC Users Guide available on the support site.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0056
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to access the Group Manager because of insufficient license permissions.
- Detailed Description
- The Group Manager cannot be accessed because of insufficient license permissions.
- Recommended Response Action
- Contact the system administrator to get necessary Enterprise license. For more information about licenses, see the Online help by pressing F1, or see the iDRAC Users Guide available on the support site.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0057
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Your business depends on efficient management of IT infrastructure and application. You face the challenges of maintaining IT availability, improving productivity and reducing operational costs.
- Detailed Description
- Your business depends on efficient management of IT infrastructure and application. You face the challenges of maintaining IT availability, improving productivity and reducing operational costs. At the same time, your IT resources must remain flexible in response to dynamic business needs. Dells enterprise systems management solutions drive operational efficiencies that help you achieve dramatic improvements in the productivity and agility of your IT environment.
- Recommended Response Action
- At the same time, your IT resources must remain flexible in response to dynamic business needs. Dells enterprise systems management solutions drive operational efficiencies that help you achieve dramatic improvements in the productivity and agility of your IT environment.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0058
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to complete the configuration operation because the System Lockdown mode is enabled.
- Detailed Description
- Unable to complete the configuration operation because the System Lockdown mode is enabled.
- Recommended Response Action
- Disable the System Lockdown mode and retry the operation. To disable System Lockdown mode, Go to iDRAC home page Dashboard More Actions Turn off the System Lockdown Mode (or) on iDRAC secure shell, use the command racadm set iDRAC.Lockdown.SystemLockdownMode Disabled.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0059
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The configuration clone operation is successfully completed to clone the group email alert settings while the server is joined to the group. The job status is arg1.
- Arguments
- arg1 = status
- Detailed Description
- The configuration clone operation is successfully completed to clone the group email alert settings while the server is joined to the group. The job status is as identified in the message.
- Recommended Response Action
- No response action is required.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0060
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to remove the group member because the group needs at least one member.
- Detailed Description
- The group member cannot be removed because the group needs at least one active member. A member in a group that has only one member or whole group members all together cannot be removed, but the group itself must be deleted by running the command.
- Recommended Response Action
- Delete the group by using the graphical user interface (GUI): On the Group Manager Summary page, click the Edit Group tab. Or, run the RACADM command at the command line interface (CLI) : racadm groupmanager delete -g <groupname>.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0061
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to run the job because the server is offline.
- Detailed Description
- The job cannot be run because the server is offline. However, the server is removed from the controller cache, but the server may reappear in the group after the server iDRAC is available online.
- Recommended Response Action
- Wait for the server to be available online, and then rerun the job.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0062
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to run the job because invalid user credentials are entered.
- Detailed Description
- The job cannot be run because invalid user credentials are entered.
- Recommended Response Action
- Enter valid credentials and retry the operation.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0063
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to complete the requested operation because the iDRAC Group Manager feature is disabled.
- Detailed Description
- The iDRAC Group Manager feature is disabled. iDRAC will no longer be able to create or join or maintain iDRAC local groups. However, all the earlier settings of Group Manager are preserved. To enable the Group Manager, log in to iDRAC. On the Dashboard page, click Enable Group Manager.
- Recommended Response Action
- Enable the iDRAC Group Manager feature and retry the operation. To enable the Group Manager, log in to iDRAC. On the Dashboard page, click Enable Group Manager.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0064
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to stop the group job because it is not an actively running job.
- Detailed Description
- The group job cannot be stopped because it is not in the active state. Only a job in running state can be stopped. Scheduled and completed group jobs cannot be stopped.
- Recommended Response Action
- No response action is required.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0065
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to retry completing the group job because it is not in an error state.
- Detailed Description
- The group job cannot be retried because it is not in an error state. Only failed or errored group job shall be retried.
- Recommended Response Action
- No response action is required.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0066
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to start the requested operation on the group job because the operation is not supported.
- Detailed Description
- The group job cannot be started because an invalid operation is requested.
- Recommended Response Action
- No response action is required.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0067
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to schedule a group job for the requested operation because the maximum number of group jobs are already created.
- Detailed Description
- The group job cannot be scheduled for the requested operation because the maximum number of group jobs are already created. A maximum of 50 group jobs of all states are maintained by the Group Manager.
- Recommended Response Action
- Delete the completed group jobs and retry the operation.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0068
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to complete a system configuration job because a group job is in progress.
- Detailed Description
- The group job cannot be completed because a group job is in progress.
- Recommended Response Action
- Wait for the existing group job to get completed and retry the operation.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0069
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to cancel the group job because it is not in the scheduled state.
- Detailed Description
- The group job cannot be cancelled because it is not in the scheduled state. Active and completed group jobs cannot be cancelled.
- Recommended Response Action
- No response action is required.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0070
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The server with the Service Tag arg1 is unable to leave the local group arg2 either because the iDRAC is not part of the group or there are issues in the network connection.
- Arguments
- arg1 = Service Tag
- arg2 = group name
- Detailed Description
- The server with the Service Tag identified in the message is unable to leave the local group either because the iDRAC is not part of the group or there are issues in the network connection.
- Recommended Response Action
- Do any one of the following and retry the operation: 1) Enter the correct group name. 2) Verify the network cabling connections.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0071
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to onboard the group member because the Group Controller detected arg1 or more repeated failed authentication attempts.
- Arguments
- arg1 = Authentication Failure Count
- Detailed Description
- The group member cannot be onboarded because the Group Controller detected three or more repeated failed authentication attempts. <font color="black">Group is locked for 5 minutes.
- Recommended Response Action
- Wait for 5 minutes, and then retry onboarding the group member.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0072
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to delete the group job because the job is already running.
- Detailed Description
- The group job cannot be deleted because the job is running.
- Recommended Response Action
- Do any one of the following: 1) Wait for the job to run successfully and then delete the job. 2) Stop the job and then delete the job.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0073
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to reschedule the group job because the job is already running.
- Detailed Description
- The group job cannot be rescheduled because the job is running.
- Recommended Response Action
- Do any one of the following: 1) Wait for the job to run successfully and then delete the job. 2) Stop the job and then delete the job.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0074
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The requested Group Manager Configuration operation is successfully completed.
- Detailed Description
- The requested Group Manager Configuration operation is successfully completed.
- Recommended Response Action
- Wait for 60 seconds before performing another Group Manager operation.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0075
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Some Group members are offline. Changing the group passcode when some group members are offline results in the creation of duplicate groups. Do you want to continue?
- Detailed Description
- Some Group members are offline. Changing a group passcode when some group members are offline results in the creation of duplicate groups.
- Recommended Response Action
- Do one or all of the following and retry the operation: 1) Resolve all the connectivity issues in the group, and then change the group passcode. 2) Remove the offline group members, and then change the group password.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0076
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to complete the configuration operation because either the iDRAC has a pending update process or a pending local configuration job in the queue.
- Detailed Description
- The configuration operation cannot be completed because either the iDRAC has a pending update process or a pending local configuration job in the queue.
- Recommended Response Action
- Wait for the current operation or local iDRAC jobs to complete and retry the operation. To view a list of local iDRAC jobs, on the iDRAC homepage of graphical user interface (GUI), click Job Queue. To view by running the RACADM command, enter "racadm jobqueue".
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0077
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to add the iDRAC to group because the maximum possible iDRACs are already added to the group.
- Detailed Description
- The iDRAC cannot be added to group because the maximum possible iDRACs are already added to group.
- Recommended Response Action
- Remove the existing iDRAC(s) from the group. If available iDRACs are more than allowed number of iDRACs, upgrade to OpenManage Consoles.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0078
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The Group Manager job is unable to add anymore iDRAC local users because the maximum allowed local users already exist.
- Detailed Description
- The Group Manager job is unable to add anymore iDRAC local users because the maximum allowed local users already exist.
- Recommended Response Action
- Delete any existing local user on the iDRAC and rerun the group job.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0079
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The Group Manager job is unable to update the iDRAC local user password because the user does not exist. The maximum allowed local users are already configured on the iDRAC.
- Detailed Description
- The Group Manager job is unable to update the iDRAC local user password because the user does not exist. The maximum allowed local users are already configured on the iDRAC.
- Recommended Response Action
- Remove any existing local user on the iDRAC and rerun the group job.
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0080
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to upgrade the firmware because the image file cannot be downloaded.
- Detailed Description
- The firmware version cannot be upgraded because the image file cannot be downloaded.
- Recommended Response Action
- For information about a resolution to this issue, see the iDRAC Group Manager job view.
- Category
- Updates (GMGR = Group Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0081
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The firmware version of the Group Controller is successfully cloned and the server is included to the group.
- Detailed Description
- The firmware version of the Group Controller is successfully cloned and the server is included to the group.
- Recommended Response Action
- No response action is required.
- Category
- Updates (GMGR = Group Manager)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0082
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The firmware image file is successfully downloaded.
- Detailed Description
- The firmware image file is successfully downloaded.
- Recommended Response Action
- No response action is required.
- Category
- Updates (GMGR = Group Manager)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0083
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to update the firmware version of the server because the selected group firmware version is already installed.
- Detailed Description
- The firmware version of the server will not be updated because the selected group firmware version is already installed.
- Recommended Response Action
- No response action is required.
- Category
- Updates (GMGR = Group Manager)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0084
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to update the firmware version of server in the group because the firmware is invalid for this platform.
- Detailed Description
- Unable to update the firmware version of server in the group because the firmware is invalid for this platform.
- Recommended Response Action
- Use the firmware version recommended for wider platform specification and group update.
- Category
- Updates (GMGR = Group Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0085
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to update the firmware version of the server because the firmware update feature is not supported by the iDRAC version currently installed on this server.
- Detailed Description
- The firmware version of the group cannot be updated because the firmware update feature is not supported by the iDRAC version currently installed on this server.
- Recommended Response Action
- Update the iDRAC version of the server to version 4.40.00.00 and later, and then retry the operation.
- Category
- Updates (GMGR = Group Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0086
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Duplicate iDRAC groups are existing because of incompatible iDRAC firmware versions.
- Detailed Description
- Duplicate iDRAC groups are existing because of incompatible iDRAC firmware versions.
- Recommended Response Action
- Update to the latest iDRAC firmware version to make sure that the iDRAC versions on all members are the same.
- Category
- Audit (GMGR = Group Manager)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0087
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The device is unable to join the iDRAC local group because an incompatible iDRAC firmware version is detected.
- Detailed Description
- The device is unable to join the iDRAC local group because an incompatible iDRAC firmware version is detected.
- Recommended Response Action
- Update the latest iDRAC firmware version on the server and retry the operation. To update iDRAC by using iDRAC GUI, click (Maintenance > System Update > Manual Update). By using RACADM, run the following at the Command Line Interface (CLI): "racadm update".
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
GMGR0088
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The device arg1 is unable to join the iDRAC local group arg2 because an incompatible iDRAC firmware version is detected on the local group leader.
- Arguments
- arg1 = Service Tag
- arg2 = group Name
- Detailed Description
- The device identified in the message is unable to join the iDRAC local group because an incompatible iDRAC firmware version is detected on the local group leader.
- Recommended Response Action
- Install iDRAC version 4.40.00.00 and later on the local group leader, and then retry the operation. To update iDRAC by using iDRAC GUI, click (Maintenance > System Update > Manual Update). By using RACADM, run the following at the Command Line Interface (CLI) "racadm update".
- Category
- Configuration (GMGR = Group Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\