PowerEdge Servers Error and Event Messages Reference Guide

PDF

IRC—Integrated Rack Controller Event Messages

IRC0001

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Fault detected at arg1.
Arguments
  • arg1 = sourceName
Detailed Description
There are 6 Possible pfaults, this will provide the location of pfault identified.
Recommended Response Action
Fault detected, please check the affected components.
Category
System Health (IRC = Integrated Rack Controller)
Severity
Warning
Trap/EventID
3826
Redfish Event Type
Alert
Applicable Event or Alert Types
iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types
CMC—Not Applicable

IRC0002

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Fault rectified at arg1.
Arguments
  • arg1 = sourceName
Detailed Description
There are 6 Possible pfaults, this will provide the location of pfault rectified.
Recommended Response Action
No response action is required.
Category
System Health (IRC = Integrated Rack Controller)
Severity
Informational
Trap/EventID
3827
Redfish Event Type
Alert
Applicable Event or Alert Types
iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types
CMC—Not Applicable

IRC0003

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The arg1 value has dropped below the lower critical limit.
Arguments
  • arg1 = SensorName
Detailed Description
The Inlet_Temp value has dropped below the lower critical limit.
Recommended Response Action
The sensor value has dropped below the lower critical limit. Please check the affected component.
Category
System Health (IRC = Integrated Rack Controller)
Severity
Critical
Trap/EventID
3825
Redfish Event Type
Alert
Applicable Event or Alert Types
iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types
CMC—Not Applicable

IRC0004

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The arg1 value has exceeded the upper critical limit.
Arguments
  • arg1 = SensorName
Detailed Description
The PDB_Temp value has exceeded the upper critical limit.
Recommended Response Action
The sensor value has exceeded the upper critical limit. Please check the affected component.
Category
System Health (IRC = Integrated Rack Controller)
Severity
Critical
Trap/EventID
3825
Redfish Event Type
Alert
Applicable Event or Alert Types
iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types
CMC—Not Applicable

IRC0005

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The arg1 value has dropped below the lower warning limit.
Arguments
  • arg1 = SensorName
Detailed Description
The Imonitor_1 value has dropped below the lower warning limit.
Recommended Response Action
The sensor value has dropped below the lower warning limit. Please check the affected component.
Category
System Health (IRC = Integrated Rack Controller)
Severity
Warning
Trap/EventID
3826
Redfish Event Type
Alert
Applicable Event or Alert Types
iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types
CMC—Not Applicable

IRC0006

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The arg1 value has exceeded the upper warning limit.
Arguments
  • arg1 = SensorName
Detailed Description
The RTC_Battery value has exceeded the upper warning limit.
Recommended Response Action
The sensor value has exceeded the upper warning limit. Please check the affected component.
Category
System Health (IRC = Integrated Rack Controller)
Severity
Warning
Trap/EventID
3826
Redfish Event Type
Alert
Applicable Event or Alert Types
iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types
CMC—Not Applicable

IRC0007

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The arg1 value has returned to its normal value.
Arguments
  • arg1 = SensorName
Detailed Description
The Imonitor_2 value has returned to its normal value.
Recommended Response Action
No response action is required.
Category
System Health (IRC = Integrated Rack Controller)
Severity
Informational
Trap/EventID
3827
Redfish Event Type
Alert
Applicable Event or Alert Types
iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types
CMC—Not Applicable

IRC0008

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Fault detected at arg1.
Arguments
  • arg1 = component_name
Detailed Description
A critical fault is detected at the component indicated in the message.
Recommended Response Action
A critical fault is detected at the component indicated in the message. Locate the rack and inspect the affected component. For further instructions, refer to the Integrated Rack Controller Installation and Service Manual available on the support site.
Category
System Health (IRC = Integrated Rack Controller)
Severity
Critical
Trap/EventID
3825
Redfish Event Type
Alert
Applicable Event or Alert Types
iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types
CMC—Not Applicable

IRC0028

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The following Services policies are enabled: arg1.
Arguments
  • arg1 = policy_name
Detailed Description
The Services policies identified in the message are enabled successfully.
Recommended Response Action
No response action is required.
Category
Audit (IRC = Integrated Rack Controller)
Severity
Informational
Trap/EventID
9971
Redfish Event Type
Alert
Applicable Event or Alert Types
iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types
CMC—Not Applicable

IRC0031

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The policy actions that were in-progress for policy arg1 have been cancelled.
Arguments
  • arg1 = policy_name
Detailed Description
The policy actions in progress have been cancelled by a user.
Recommended Response Action
No response action required.
Category
Audit (IRC = Integrated Rack Controller)
Severity
Informational
Trap/EventID
9971
Redfish Event Type
Alert
Applicable Event or Alert Types
iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types
CMC—Not Applicable

IRC0032

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
A leak detection policy watchdog timeout setting has been updated by a user to arg1 seconds.
Arguments
  • arg1 = timeout_value
Detailed Description
A leak detection policy watchdog timeout setting has been updated by a user to the value indicated in the message.
Recommended Response Action
No response action is required.
Category
Audit (IRC = Integrated Rack Controller)
Severity
Informational
Trap/EventID
9971
Redfish Event Type
Alert
Applicable Event or Alert Types
iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types
CMC—Not Applicable

IRC0033

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The watchdog timer has been reset. Timer is restarted to count down from arg1 seconds.
Arguments
  • arg1 = timeout_value
Detailed Description
The watchdog timer has been reset. Watchdog is restarted to count down from timeout value given in the message.
Recommended Response Action
No response action is required.
Category
Audit (IRC = Integrated Rack Controller)
Severity
Informational
Trap/EventID
9971
Redfish Event Type
Alert
Applicable Event or Alert Types
iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types
CMC—Not Applicable

IRC0065

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
IRC reset to factory defaults is initiated.
Detailed Description
IRC reset to factory defaults is initiated. The operation requires IRC to reboot. Upon reboot, it is important to note that access to IRC will require using the factory default credentials.
Recommended Response Action
No response action is required.
Category
Audit (IRC = Integrated Rack Controller)
Severity
Informational
Trap/EventID
9971
Redfish Event Type
Alert
Applicable Event or Alert Types
iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types
CMC—Not Applicable

IRC0066

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
IRC reset to factory defaults operation has completed.
Detailed Description
IRC reset to factory defaults operation has completed.
Recommended Response Action
No response action is required.
Category
Audit (IRC = Integrated Rack Controller)
Severity
Informational
Trap/EventID
9971
Redfish Event Type
Alert
Applicable Event or Alert Types
iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types
CMC—Not Applicable

IRC0067

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
IRC reset to factory defaults operation was not successful.
Detailed Description
IRC reset to factory defaults operation was not successful.
Recommended Response Action
Do the following: 1) Perform an IRC reboot and retry the operation. 2) If the issue persists, remove power from IRC, re-apply power to IRC, and retry the operation. 3) If the issue persist, refer to the Users Guide of the product model available in the support site.
Category
Audit (IRC = Integrated Rack Controller)
Severity
Warning
Trap/EventID
9970
Redfish Event Type
Alert
Applicable Event or Alert Types
iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types
CMC—Not Applicable

IRC0090

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The SupportAssist arg1 operation did not complete successfully.
Arguments
  • arg1 = operation_name
Detailed Description
The SupportAssist operation identified in the message did not complete successfully.
Recommended Response Action
Check the logs for related errors and perform the recommended response actions for the errors, and then retry the operation.
Category
Audit (IRC = Integrated Rack Controller)
Severity
Warning
Trap/EventID
9970
Redfish Event Type
Alert
Applicable Event or Alert Types
iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types
CMC—Not Applicable

IRC0091

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create the SupportAssist job for arg1.
Arguments
  • arg1 = operation_name
Detailed Description
The SupportAssist job identified in the message cannot be created.
Recommended Response Action
Do the following: 1) If a job operation is already running, retry the operation after the existing job is completed. 2) If job count has reached maximum count supported, reduce the job count by deleting one or more jobs, then retry the operation. If issue persist, refer to the Users Guide of the product model available in the support site.
Category
Audit (IRC = Integrated Rack Controller)
Severity
Warning
Trap/EventID
9970
Redfish Event Type
Alert
Applicable Event or Alert Types
iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types
CMC—Not Applicable

IRC0132

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to complete the SupportAssist operation within the allocated time.
Detailed Description
The SupportAssist operation did not complete within the allocated time.
Recommended Response Action
Perform a reset and retry the operation. If issue persist, refer to the Users Guide of the product model available in the support site.
Category
Audit (IRC = Integrated Rack Controller)
Severity
Warning
Trap/EventID
9970
Redfish Event Type
Alert
Applicable Event or Alert Types
iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types
CMC—Not Applicable

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\