PowerEdge Servers Error and Event Messages Reference Guide

PDF

NVFA—Fabric Event Messages

NVFA0001

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to configure fabric because the fabric already exists.
Detailed Description
The fabrics cannot be configured because the fabric already exists.
Recommended Response Action
No response action is required.
Category
Configuration (NVFA = Fabric)
Severity
Critical
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVFA0002

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to configure the fabric because the Fabric Node arg1 does not exist.
Arguments
  • arg1 = node ID
Detailed Description
The fabric cannot be configured because the fabric node identified in the message is not present.
Recommended Response Action
Enter a valid fabric node and retry the operation again.
Category
Configuration (NVFA = Fabric)
Severity
Critical
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVFA0003

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to retrieve fabric because the fabric does not exist.
Detailed Description
The fabric cannot be retrieved because the fabric does not exist.
Recommended Response Action
Enter a valid fabric and retry the operation.
Category
Configuration (NVFA = Fabric)
Severity
Critical
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVFA0004

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to configure fabric with the given Node arg1 because the node is already part of another fabric arg2.
Arguments
  • arg1 = node ID
  • arg2 = fabric ID
Detailed Description
The fabric cannot be configured because the node mentioned in the message is already part of another fabric.
Recommended Response Action
Create the fabric with a different node which is not part of any existing fabric and retry the operation.
Category
Configuration (NVFA = Fabric)
Severity
Critical
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVFA0005

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to configure fabric design because the fabric design arg1 does not exist.
Arguments
  • arg1 = fabric design
Detailed Description
The fabric cannot be configured because the fabric design identified in the message does not exist.
Recommended Response Action
Enter a valid fabric design and retry the operation again.
Category
Configuration (NVFA = Fabric)
Severity
Critical
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVFA0006

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to do configure fabric because the fabric node arg1, node type arg2 does not match with fabric design node arg3 design node type arg4.
Arguments
  • arg1 = fabric node
  • arg2 = node type
  • arg3 = fabric design
  • arg4 = design node type
Detailed Description
The fabric cannot be configured because the fabric node and fabric design node identified in the message does not match.
Recommended Response Action
Enter a valid fabric node, node type and retry the operation again.
Category
Configuration (NVFA = Fabric)
Severity
Critical
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVFA0007

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to configure fabric because the design node arg1 does not exist in fabric design.
Arguments
  • arg1 = design node
Detailed Description
The fabric cannot be configured because the design node does not exist in the fabric design identified in the message.
Recommended Response Action
Enter a valid design node and retry the operation again.
Category
Configuration (NVFA = Fabric)
Severity
Critical
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVFA0008

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to configure fabric because the fabric design node count arg1 does not match with fabric node count arg2.
Arguments
  • arg1 = fabric nodes count
  • arg2 = fabric node count
Detailed Description
The fabric cannot be configured because the fabric node count and fabric design node count identified in the message does not match.
Recommended Response Action
Enter valid nodes matching the fabric design and retry the operation again.
Category
Configuration (NVFA = Fabric)
Severity
Critical
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVFA0009

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Updating fabric design map on an existing fabric is not supported.
Detailed Description
Once fabric is created, the design map cannot be changed.
Recommended Response Action
No response action is required.
Category
Configuration (NVFA = Fabric)
Severity
Critical
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVFA0010

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Updating the fabric design of an existing fabric is not supported.
Detailed Description
Once fabric is created, fabric design cannot be updated.
Recommended Response Action
No response action is required.
Category
Configuration (NVFA = Fabric)
Severity
Critical
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVFA0011

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Updating the nodes of an existing fabric is not supported.
Detailed Description
Once the fabric is created, the nodes cannot be added/removed.
Recommended Response Action
No response action is required.
Category
Configuration (NVFA = Fabric)
Severity
Critical
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVFA0012

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to assign the nodearg1 to a fabric because a Lifecycle operation is in progress on the node and the node state is arg2.
Arguments
  • arg1 = node ID
  • arg2 = current lifecycle state
Detailed Description
The node identified in the message cannot be assigned to a fabric because a Lifecycle operation is in progress on the node.
Recommended Response Action
Wait for the pending Lifecycle action to complete and retry the operation.
Category
Configuration (NVFA = Fabric)
Severity
Critical
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVFA0013

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to start the Fabric Lifecycle operation because a Lifecycle operation is already in progress on the Fabric.
Detailed Description
The Lifecycle operation cannot be started on the Fabric because a Lifecycle operation is already in progress on the Fabric.
Recommended Response Action
Wait for the pending Lifecycle operation to get completed and retry the operation.
Category
Configuration (NVFA = Fabric)
Severity
Critical
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVFA0014

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to delete the fabric because a fabric upgrade operation is in progress on the selected fabric.
Detailed Description
The fabric cannot be deleted because a fabric upgrade operation is in progress on the selected fabric.
Recommended Response Action
Wait for the pending lifecycle operation on the fabric to be completed and retry the operation.
Category
Configuration (NVFA = Fabric)
Severity
Critical
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVFA0015

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to apply the Fabric Lifecycle configuration because the lead I/O module arg1 lifecycle activity is in progress.
Arguments
  • arg1 = lead servicetag
Detailed Description
The Fabric Lifecycle operation cannot be applied because the lead I/O modules lifecycle activity is in progress.
Recommended Response Action
Wait for the Lifecycle activity of the lead I/O module to complete and retry the operation.
Category
Configuration (NVFA = Fabric)
Severity
Critical
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVFA0016

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to replace the switch because the Service Tag provided for the old or new switch is invalid, the old switch is still online, the new switch is offline, or the new switch is or was part of another fabric.
Detailed Description
The switch cannot be replaced because the Service Tag provided for the old or new switch is invalid, the old switch is still online, the new switch is offline, or the new switch is or was part of another fabric.
Recommended Response Action
Make sure of the following and retry the operation: 1) The Service Tag entered for the old and new switch is valid. 2) The old switch has physically been removed. 3) The new switch is online in full-switch mode and at the same version of OS10 as the other switch in the SmartFabric. 4) The new switch was not part of another SmartFabric in the same Multi-Chassis Management group as the old switch.
Category
System Health (NVFA = Fabric)
Severity
Critical
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVFA0017

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to process the request because the number of instances on which the Internet Group Management Protocol (IGMP) and Multicast Listener Discovery (MLD) Snooping is enabled has exceeded the threshold value of arg1.
Arguments
  • arg1 = thresholdValue
Detailed Description
The request cannot be processed because the number of instances on which the Internet Group Management Protocol (IGMP) and Multicast Listener Discovery (MLD) Snooping is enabled has exceeded the threshold value as identified in the message.
Recommended Response Action
Make sure that the number of IGMP and MLD Snooping instances are less than the threshold value, and then retry the operation.
Category
Configuration (NVFA = Fabric)
Severity
Critical
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\