PowerEdge Servers Error and Event Messages Reference Guide
PFM—System Performance Event Event Messages
PFM0001
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The value of arg1 is greater than the upper critical threshold.
- Arguments
- arg1 = name
- Detailed Description
- The utilization value of the sensor identified in the message is higher than the upper critical threshold.
- Recommended Response Action
- Check the work load of the server and reduce the workload if necessary to bring the system performance into required ranges. For more information about the specified values, see the relevant product documentation available at the support site.
- Category
- System Health (PFM = System Performance Event)
- Severity
- Critical
- LCD Message
- The value of <name> is greater than the upper critical threshold.
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
PFM0002
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The value of arg1 is greater than the upper warning threshold.
- Arguments
- arg1 = name
- Detailed Description
- The utilization value of the sensor identified in the message is higher than the upper warning threshold.
- Recommended Response Action
- Check the work load of the server and reduce the workload if necessary to bring the system performance into required ranges. For more information about the specified values, see the relevant product documentation available at the support site.
- Category
- System Health (PFM = System Performance Event)
- Severity
- Warning
- Trap/EventID
- 2650
- LCD Message
- The value of <name> is greater than the upper warning threshold.
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, IPMI Alert*, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Not Applicable
PFM0003
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The value of arg1 is less than the lower warning threshold.
- Arguments
- arg1 = name
- Detailed Description
- The utilization value of the sensor identified in the message is lower than the lower warning threshold value.
- Recommended Response Action
- The workload on server is almost zero. Consider assigning additional workloads to the server.
- Category
- System Health (PFM = System Performance Event)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
PFM0004
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The value of arg1 is within specified limits.
- Arguments
- arg1 = name
- Detailed Description
- The value of the sensor identified in the message is within specified limits.
- Recommended Response Action
- No response action is required.
- Category
- System Health (PFM = System Performance Event)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\