PowerEdge Servers Error and Event Messages Reference Guide

PDF

SIOM—SAS IOM Event Messages

SIOM0001

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
SAS IOM arg1 could not establish communication with SAS IOM arg2 due to a communication fault.
Arguments
  • arg1 = IOM name1
  • arg2 = IOM name2
Detailed Description
The SAS IOM devices identified in the message could not communicate with each other via the inter IOM link.
Recommended Response Action
Reseat the SAS IOM devices one at a time and retry the operation. For information about managing SAS IOM devices, refer to the OpenManage Enterprise Modular Version Users Guide available on the support site.
Category
System Health (SIOM = SAS IOM)
Severity
Critical
Redfish Event Type
Alert
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0002

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The communication between SAS IOM arg1 and SAS IOM arg2 is restored.
Arguments
  • arg1 = IOM name1
  • arg2 = IOM name2
Detailed Description
The communication between the SAS IOM devices identified in the message is successfully restored. The PartnerInterconnectCommunicationFault event is resolved.
Recommended Response Action
No response action is required.
Category
System Health (SIOM = SAS IOM)
Severity
Informational
Redfish Event Type
Alert
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0003

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The SAS IOM is currently configured for redundancy but SAS IOM arg1 has a firmware mismatch with SAS IOM arg2.
Arguments
  • arg1 = IOM name1
  • arg2 = IOM name2
Detailed Description
The SAS IOM is currently configured for redundancy but the firmware version of the SAS IOM devices identified in the message do not match.
Recommended Response Action
Update the firmware version and retry the operation. If the issue, persists, replace the SAS IOM. For information about managing SAS IOM devices, refer to OpenManage Enterprise Modular Version Users Guide available on the support site.
Category
System Health (SIOM = SAS IOM)
Severity
Critical
Redfish Event Type
Alert
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0004

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
SAS IOM arg1 and SAS IOM arg2 firmware mismatch has been resolved.
Arguments
  • arg1 = IOM name1
  • arg2 = IOM name2
Detailed Description
The firmware version mismatch between the SAS IOM devices identified in the message is successfully resolved.
Recommended Response Action
No response action is required.
Category
System Health (SIOM = SAS IOM)
Severity
Informational
Redfish Event Type
Alert
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0005

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The SAS IOM device redundancy is degraded.
Detailed Description
This event indicates that the SAS IOM has been configured for dual domain operation but only one module is currently present.
Recommended Response Action
Insert a SAS IOM device into the empty slot and retry the operation. For information about managing SAS IOM devices, refer to OpenManage Enterprise Modular Version Users Guide available on the support site.
Category
System Health (SIOM = SAS IOM)
Severity
Warning
Redfish Event Type
Alert
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0006

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The SAS IOM device redundancy issue is resolved.
Detailed Description
The SAS IOM device redundancy issue is resolved. The specified number of IOMs are now present in the slots.
Recommended Response Action
No response action is required.
Category
System Health (SIOM = SAS IOM)
Severity
Informational
Redfish Event Type
Alert
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0007

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to update the firmware version of the device because of an internal error.
Detailed Description
Unable to update the firmware version of the device because of an internal error.
Recommended Response Action
Retry the firmware update operation. If the issue persists, contact your service provider. For information about updating devices, refer to OpenManage Enterprise Modular Version Users Guide available on the support site.
Category
System Health (SIOM = SAS IOM)
Severity
Warning
Redfish Event Type
Alert
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0008

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to update the firmware because the firmware image file is invalid.
Detailed Description
The firmware version cannot be updated because the firmware image file is invalid. This could indicate conditions such as corrupted or unsigned package.
Recommended Response Action
Use a valid firmware image file that is compatible with SAS IOM or storage enclosure hardware, and then retry the firmware update operation. For information about updating devices, refer to OpenManage Enterprise Modular Version Users Guide available on the support site.
Category
System Health (SIOM = SAS IOM)
Severity
Warning
Redfish Event Type
Alert
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0009

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Firmware update successful.
Detailed Description
The firmware is successfully updated.
Recommended Response Action
No response action is required.
Category
System Health (SIOM = SAS IOM)
Severity
Informational
Redfish Event Type
Alert
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0010

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to apply the storage assignment.
Detailed Description
The storage assignment cannot be applied.
Recommended Response Action
Retry the operation. For information about managing SAS IOM devices, refer to OpenManage Enterprise Modular Version Users Guide available on the support site.
Category
System Health (SIOM = SAS IOM)
Severity
Warning
Redfish Event Type
Alert
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0011

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The storage assignment is successfully applied.
Detailed Description
The storage assignment is successfully applied.
Recommended Response Action
No response action is required.
Category
System Health (SIOM = SAS IOM)
Severity
Informational
Redfish Event Type
Alert
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0012

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
SAS IOM could not establish communication with the drive at location arg1.
Arguments
  • arg1 = drive name
Detailed Description
The SAS IOM device cannot communicate with the drive available at the location identified in the message.
Recommended Response Action
Retry the operation. If the issue persists, replace the drive. For information about managing SAS IOM devices, refer to OpenManage Enterprise Modular Version Users Guide available on the support site.
Category
System Health (SIOM = SAS IOM)
Severity
Warning
Redfish Event Type
Alert
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0013

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Drive at location arg1 is operational.
Arguments
  • arg1 = drive name
Detailed Description
The drive at the location identified in the message is working.
Recommended Response Action
No response action is required.
Category
System Health (SIOM = SAS IOM)
Severity
Informational
Redfish Event Type
Alert
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0016

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Storage enclosure in Chassis Slot arg1 has expanders with different firmware.
Arguments
  • arg1 = Chassis Slot name
Detailed Description
This event indicates that the expanders within a storage module have different firmware versions.
Recommended Response Action
Flash the Expanders with the latest firmware. For information about managing SAS IOM devices, refer to OpenManage Enterprise Modular Version Users Guide available on the support site.
Category
System Health (SIOM = SAS IOM)
Severity
Warning
Redfish Event Type
Alert
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0017

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Firmware mismatch on expanders within a storage enclosure in Chassis Slot arg1 has been cleared.
Arguments
  • arg1 = Chassis Slot name
Detailed Description
This event indicates that the expanders within a storage module now have the same firmware.
Recommended Response Action
No response action is required.
Category
System Health (SIOM = SAS IOM)
Severity
Informational
Redfish Event Type
Alert
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0018

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Hot swappable expander arg1 in storage enclosure in Chassis Slot arg2 is not functioning correctly.
Arguments
  • arg1 = EMM name
  • arg2 = Chassis Slot name
Detailed Description
The hot-swappable expander identified in the message in the storage enclosure in Chassis slot is not functioning.
Recommended Response Action
Reseat the hot-swappable expander. If the issue persists, replace the hot-swappable expander.
Category
System Health (SIOM = SAS IOM)
Severity
Warning
Redfish Event Type
Alert
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0019

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Hot swappable expander arg1 in storage enclosure in Chassis Slot arg2 is functioning correctly.
Arguments
  • arg1 = EMM name
  • arg2 = Chassis Slot name
Detailed Description
The hot-swappable expander identified in the message in the storage enclosure in Chassis slot is functioning.
Recommended Response Action
No response action is required.
Category
System Health (SIOM = SAS IOM)
Severity
Informational
Redfish Event Type
Alert
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0020

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Storage enclosure in Chassis Slot arg1 has been added.
Arguments
  • arg1 = Chassis Slot name
Detailed Description
The storage enclosure is inserted into the Chassis slot identified in the message. This is for hotplug only.
Recommended Response Action
No response action is required.
Category
System Health (SIOM = SAS IOM)
Severity
Informational
Redfish Event Type
ResourceAdded
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0021

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Storage enclosure in Chassis Slot arg1 has been removed.
Arguments
  • arg1 = Chassis Slot name
Detailed Description
The storage enclosure is removed from the Chassis slot identified in the message. The enclosure will also be marked as removed if all SAS connectivity to the enclosure is lost.
Recommended Response Action
No response action is required if the enclosure was removed. If the enclosure was not physically removed confirm the enclosure is powered on and the expanders are installed, and not faulted.
Category
System Health (SIOM = SAS IOM)
Severity
Informational
Redfish Event Type
ResourceRemoved
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0022

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Hot swappable expander arg1 has been added to storage sled in slot arg2.
Arguments
  • arg1 = EMM slot
  • arg2 = Insight slot
Detailed Description
The hot-swappable expander identified in the message is inserted. This is for hot plug only.
Recommended Response Action
No response action is required.
Category
System Health (SIOM = SAS IOM)
Severity
Informational
Redfish Event Type
ResourceAdded
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0023

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Hot swappable expander arg1 has been removed from storage sled in slot arg2.
Arguments
  • arg1 = EMM slot
  • arg2 = Insight slot
Detailed Description
The hot-swappable expander identified in the message has been removed from the storage Enclosure.
Recommended Response Action
No response action is required.
Category
System Health (SIOM = SAS IOM)
Severity
Informational
Redfish Event Type
ResourceRemoved
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0024

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Reset has been initiated on storage enclosure in slot arg1.
Arguments
  • arg1 = Chassis Slot name
Detailed Description
The Reset operation is initiated on the storage enclosure in the Chassis identified in the message.
Recommended Response Action
No response action is required.
Category
System Health (SIOM = SAS IOM)
Severity
Informational
Redfish Event Type
Alert
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0025

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
SAS IOM arg1 has a configuration mismatch with SAS IOM arg2.
Arguments
  • arg1 = IOM name1
  • arg2 = IOM name2
Detailed Description
There is a configuration mismatch between the SAS IOM devices identified in the message.
Recommended Response Action
The configuration mismatch could be due to incorrect SAS IOM movement. Choose the ForceActive option in OpenManage Enterprise - Modular to override the mismatch and use the local configuration, and then apply to both SAS IOMs.
Category
System Health (SIOM = SAS IOM)
Severity
Critical
Redfish Event Type
Alert
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0026

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
SAS IOM arg1 and SAS IOM arg2 now have the same configuration.
Arguments
  • arg1 = IOM name1
  • arg2 = IOM name2
Detailed Description
The configuration of both SAS IOM devices identified in the message is the same.
Recommended Response Action
No response action is required.
Category
System Health (SIOM = SAS IOM)
Severity
Informational
Redfish Event Type
Alert
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0027

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
SAS IOM arg1 has a configuration that is not consistent with chassis.
Arguments
  • arg1 = IOM name
Detailed Description
This event indicates that the foreign SAS IOMs are inserted to the chassis.
Recommended Response Action
The configuration mismatch could be due to incorrect switch movement. Do one of the following: 1) Replace the switch. 2) Run the ForceActive command at the command line interface to override the mismatch and use the local configuration, and then apply to both switches.
Category
System Health (SIOM = SAS IOM)
Severity
Critical
Redfish Event Type
Alert
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0028

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The configuration of SAS IOM device arg1 is consistent with the configuration of Chassis.
Arguments
  • arg1 = IOM name
Detailed Description
The configuration of both SAS IOM device identified in the message is consistent with the configuration of Chassis.
Recommended Response Action
No response action is required.
Category
System Health (SIOM = SAS IOM)
Severity
Informational
Redfish Event Type
Alert
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0029

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
SAS IOM arg1 has inconsistent firmware versions in its components.
Arguments
  • arg1 = IOM name
Detailed Description
The SAS IOM device identified in the message has inconsistent firmware versions in its components such as SoC, IOC, and expander.
Recommended Response Action
Update the SAS IOM with the latest firmware version.
Category
System Health (SIOM = SAS IOM)
Severity
Warning
Redfish Event Type
Alert
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0030

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
SAS IOM arg1 requires a power-cycle operation to enable the new firmware version.
Arguments
  • arg1 = IOM name
Detailed Description
The SAS IOM device identified in the message requires a power-cycle operation to enable the new firmware version.
Recommended Response Action
Power cycle the SAS IOM device identified in the message.
Category
System Health (SIOM = SAS IOM)
Severity
Warning
Redfish Event Type
Alert
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0031

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The SAS fabric for SAS IOM arg1 is unable to manage the storage assignment.
Arguments
  • arg1 = IOM name
Detailed Description
The SAS IOM device identified in the message is unable to manage the storage assignment.
Recommended Response Action
Resolve an error condition in one of more SAS IOMs. For information about managing SAS IOM devices, refer to OpenManage Enterprise Modular Version Users Guide available on the support site.
Category
System Health (SIOM = SAS IOM)
Severity
Critical
Redfish Event Type
Alert
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0032

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The SAS fabric for SAS IOM arg1 is able to manage the storage assignment.
Arguments
  • arg1 = IOM name
Detailed Description
The SAS IOM device identified in the message is able to manage the storage assignment.
Recommended Response Action
No response action is required.
Category
System Health (SIOM = SAS IOM)
Severity
Informational
Redfish Event Type
Alert
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0033

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The SAS IOM arg1 has detected multiple ECC memory errors.
Arguments
  • arg1 = IOM name
Detailed Description
The SAS IOM device identified in the message has detected multiple Error-correcting Code (ECC) errors.
Recommended Response Action
Replace the SAS IOM device. For information about managing SAS IOM devices, refer to the MX5000s SAS IOM Installation Guide available on the support site.
Category
System Health (SIOM = SAS IOM)
Severity
Critical
Redfish Event Type
Alert
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0034

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
An unsupported device has been detected in arg1.
Arguments
  • arg1 = Bay
Detailed Description
An unsupported SATA drive is detected in chassis in the slot indicated in the message.
Recommended Response Action
Remove unsupported device from chassis.
Category
System Health (SIOM = SAS IOM)
Severity
Informational
Redfish Event Type
Alert
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0035

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
A new drive has been added to arg1.
Arguments
  • arg1 = Bay
Detailed Description
This event indicates that a drive has been added.
Recommended Response Action
No response is required.
Category
System Health (SIOM = SAS IOM)
Severity
Informational
Redfish Event Type
ResourceAdded
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0036

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
A drive has been removed from arg1.
Arguments
  • arg1 = Bay
Detailed Description
This event indicates that a drive has been removed.
Recommended Response Action
No response is required.
Category
System Health (SIOM = SAS IOM)
Severity
Informational
Redfish Event Type
ResourceRemoved
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0037

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to communicate with the device because of an internal error.
Detailed Description
Unable to communicate with the device because of an internal error.
Recommended Response Action
Retry the operation. For information about managing SAS IOM devices, refer to OpenManage Enterprise Modular Version Users Guide available on the support site.
Category
System Health (SIOM = SAS IOM)
Severity
Critical
Redfish Event Type
Alert
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0038

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
A mismatch is observed in the SAS IOMs because of incorrect SAS IOM movement between the chassis.
Detailed Description
A mismatch is observed in the SAS IOMs because of incorrect SAS IOM movement between chassis or configuration changes.
Recommended Response Action
On the OpenManage Enterprise - Modular, select ForceActive (Devices-> I/O Modules-> Overview-> More Actions) to override the mismatch. The local configuration on the selected IOM will be applied to both the SAS IOMs.
Category
Storage (SIOM = SAS IOM)
Severity
Critical
Redfish Event Type
Alert
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0039

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The SAS IOM is currently configured for redundancy and the hot-spare SAS IOM is not available in the slot.
Detailed Description
The SAS IOM is currently configured for redundancy and the hot-spare SAS IOM is not available in the slot.
Recommended Response Action
Insert a SAS IOM device into the empty slot and retry the operation. For information about managing SAS IOM devices, refer to OpenManage Enterprise Modular Version Users Guide available on the support site.
Category
System Health (SIOM = SAS IOM)
Severity
Warning
Redfish Event Type
Alert
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0040

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The SAS IOM is currently configured for redundancy and communication with the hot-spare SAS IOM has ended.
Detailed Description
The SAS IOM is currently configured for redundancy and communication with the hot-spare SAS IOM has ended.
Recommended Response Action
Reseat the SAS IOM devices one by one and retry the operation. For information about managing SAS IOM devices, refer to OpenManage Enterprise Modular Version Users Guide available on the support site.
Category
System Health (SIOM = SAS IOM)
Severity
Critical
Redfish Event Type
Alert
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0041

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The SAS IOM is currently configured for redundancy but the firmware version is different from the hot-spare SAS IOM.
Detailed Description
The SAS IOM is currently configured for redundancy but the firmware version is different from the hot-spare SAS IOM.
Recommended Response Action
Update the firmware version and retry the operation. For information about managing SAS IOM devices, refer to OpenManage Enterprise Modular Version Users Guide available on the support site.
Category
System Health (SIOM = SAS IOM)
Severity
Critical
Redfish Event Type
Alert
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0042

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The SAS IOM is currently configured for redundancy but the storage assignment is different from partner SAS IOM.
Detailed Description
There is a configuration mismatch between the SAS IOM devices identified in the message.
Recommended Response Action
On the OpenManage Enterprise - Modular, select the clear configuration (Devices-> I/O Modules-> Overview-> More Actions-> Clear Configuration) option to override this mismatch.
Category
Configuration (SIOM = SAS IOM)
Severity
Critical
Redfish Event Type
Alert
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0043

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The Device must be power cycled for the new firmware version to take effect.
Detailed Description
The device does not have the updated firmware version. Device must be power cycled for the new firmware version to take effect.
Recommended Response Action
The device must be power cycled for the new firmware version to take effect.
Category
System Health (SIOM = SAS IOM)
Severity
Warning
Redfish Event Type
Alert
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0044

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
An internal error is observed on the SAS IOM or Storage modules.
Detailed Description
An internal error is observed on the SAS IOM or Storage modules.
Recommended Response Action
An error condition exists in one or more SAS IOM/storage modules. For information about managing SAS IOM devices, refer to OpenManage Enterprise Modular Version Users Guide available on the support site.
Category
System Health (SIOM = SAS IOM)
Severity
Warning
Redfish Event Type
Alert
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0045

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
A firmware version mismatch is detected between two hot-swappable expanders within the Storage enclosure.
Detailed Description
A firmware version mismatch is detected between two hot-swappable expanders within the Storage enclosure.
Recommended Response Action
Update the expander firmware. For information about managing SAS IOM devices, refer to OpenManage Enterprise Modular Version Users Guide available on the support site.
Category
System Health (SIOM = SAS IOM)
Severity
Warning
Redfish Event Type
Alert
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0046

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to communicate with one or more internal components of SAS IOM because of internal errors.
Detailed Description
Unable to communicate with one or more internal components of SAS IOM because of internal errors.
Recommended Response Action
Reseat the SAS IOM. For information about managing SAS IOM devices, refer to OpenManage Enterprise Modular Version Users Guide available on the support site.
Category
System Health (SIOM = SAS IOM)
Severity
Critical
Redfish Event Type
Alert
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0047

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
A SAS IOM in the chassis is unconfigured.
Detailed Description
A SAS IOM in the chassis is unconfigured.
Recommended Response Action
Configure the SAS IOM. For information about managing SAS IOM devices, refer to OpenManage Enterprise Modular Version Users Guide available on the support site.
Category
Configuration (SIOM = SAS IOM)
Severity
Warning
Redfish Event Type
Alert
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0048

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to complete the operation because the device is currently not present.
Detailed Description
The operation cannot be completed because the device is currently not present.
Recommended Response Action
Reinsert the device and retry the operation.
Category
System Health (SIOM = SAS IOM)
Severity
Warning
Redfish Event Type
Alert
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0050

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
A drive is in a predictive failure state.
Detailed Description
This event indicates that a drive is in a predictive failure state.
Recommended Response Action
Replace the Drive.
Category
System Health (SIOM = SAS IOM)
Severity
Warning
Redfish Event Type
Alert
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0051

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The firmware version on the Storage module requires a power cycle to become effective.
Detailed Description
The firmware version on the Storage module requires a power cycle to become effective.
Recommended Response Action
Power cycle the Storage module device. For information about managing SAS IOM devices, refer to OpenManage Enterprise Modular Version Users Guide available on the support site.
Category
System Health (SIOM = SAS IOM)
Severity
Warning
Redfish Event Type
Alert
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0052

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The device is being reported in a critical condition and requires immediate attention.
Detailed Description
The device is reported to be in Critical state and requires immediate attention.
Recommended Response Action
Check the device status and then replace if necessary.
Category
System Health (SIOM = SAS IOM)
Severity
Critical
Redfish Event Type
Alert
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0053

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The initiator port cannot access the device because of an internal error.
Detailed Description
The initiator port cannot access the device because of an internal error.
Recommended Response Action
Check the device status in storage assignment.
Category
System Health (SIOM = SAS IOM)
Severity
Warning
Redfish Event Type
Alert
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0054

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The device is reported to be in non-critical state but continues to operate normally.
Detailed Description
The device is reported to be in non-critical state but continues to operate normally.
Recommended Response Action
Check the device status and then replace if necessary.
Category
System Health (SIOM = SAS IOM)
Severity
Warning
Redfish Event Type
Alert
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0055

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The device is currently unavailable.
Detailed Description
This event indicates that the device is installed with no errors but the device has not been turned on or set into the operation.
Recommended Response Action
Check the device status, and then replace if necessary.
Category
System Health (SIOM = SAS IOM)
Severity
Warning
Redfish Event Type
Alert
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0056

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The device is not currently installed.
Detailed Description
The device identified in the message is not currently installed.
Recommended Response Action
Check the device connection, and then replace if necessary.
Category
System Health (SIOM = SAS IOM)
Severity
Warning
Redfish Event Type
Alert
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0057

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The device health status is unknown.
Detailed Description
The device health status is unknown.
Recommended Response Action
This state is normal for devices not yet assigned, or those assigned to compute nodes with HBA controllers. Once assigned a RAID controller, or storage management software stack is responsible for setting device status.
Category
System Health (SIOM = SAS IOM)
Severity
Informational
Redfish Event Type
Alert
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0058

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The device is in unrecoverable state as reported by SES (SCSI Enclosure Services).
Detailed Description
The device is in unrecoverable state as reported by SES (SCSI Enclosure Services).
Recommended Response Action
Check the device status, and then replace if necessary. If the issue persists, contact your service provider.
Category
System Health (SIOM = SAS IOM)
Severity
Warning
Redfish Event Type
Alert
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0059

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
A device is not supported.
Detailed Description
An unsupported device is detected in the chassis.
Recommended Response Action
Remove unsupported device from chassis. For more information, refer to the Users guide from support site.
Category
System Health (SIOM = SAS IOM)
Severity
Warning
Redfish Event Type
Alert
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0060

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
A topology issue is detected in the SAS Fabric.
Detailed Description
A topology issue is detected in the SAS Fabric.
Recommended Response Action
Check the physical connections of all devices in the fabric including SAS IOM, SAS IOM ports, storage modules and disk drives.
Category
System Health (SIOM = SAS IOM)
Severity
Critical
Redfish Event Type
Alert
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0061

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to display all drive properties because the drive is currently part of a storage assignment.
Detailed Description
Unable to display all drive properties because the drive is currently part of a storage assignment.
Recommended Response Action
Use storage controller to get more information of the drive.
Category
System Health (SIOM = SAS IOM)
Severity
Informational
Redfish Event Type
Alert
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0062

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to apply the storage configuration to the chassis because the slot was previously occupied by a compute sled.
Detailed Description
Unable to apply the storage configuration to the chassis because the slot was previously occupied by a compute sled.
Recommended Response Action
Remove Chassis and put compute sled in the slot. For information about managing SAS IOM devices, refer to OpenManage Enterprise Modular Version Users Guide available on the support site.
Category
System Health (SIOM = SAS IOM)
Severity
Warning
Redfish Event Type
Alert
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0063

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to apply the Storage assignment because the devices acting as the endpoint are missing or are offline.
Detailed Description
Unable to apply the Storage assignment because the devices acting as the endpoint are missing or are offline.
Recommended Response Action
Check the device and retry the operation.
Category
System Health (SIOM = SAS IOM)
Severity
Warning
Redfish Event Type
Alert
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0066

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to commit storage assignment to the device.
Detailed Description
Unable to commit storage assignment to the device.
Recommended Response Action
Retry the operation. For more information, please refer to the SAS IOM Users guide available on support site.
Category
System Health (SIOM = SAS IOM)
Severity
Warning
Redfish Event Type
Alert
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0067

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The storage assignment on the SAS IOMs does not match.
Detailed Description
The storage assignment on the SAS IOMs does not match.
Recommended Response Action
Use the ForceActive Action to apply the storage assignment from one of the SAS IOM. For information about managing SAS IOM devices, refer to OpenManage Enterprise Modular Version Users Guide available on the support site.
Category
System Health (SIOM = SAS IOM)
Severity
Critical
Redfish Event Type
Alert
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0068

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to update the SAS IOM firmware version because the SAS IOM has inconsistent firmware versions on the internal components such as SoC, IOC, and expander.
Detailed Description
Unable to update the SAS IOM firmware version because the SAS IOM has inconsistent firmware versions on the internal components such as SoC, IOC, and expander.
Recommended Response Action
Make sure that the firmware version of SAS IOM components are consistent and retry the operation. For information about managing SAS IOM devices, refer to OpenManage Enterprise Modular Version Users Guide available on the support site.
Category
System Health (SIOM = SAS IOM)
Severity
Critical
Redfish Event Type
Alert
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0069

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The support dump file is successfully created.
Detailed Description
The support dump file is successfully created .
Recommended Response Action
No response action is required.
Category
System Health (SIOM = SAS IOM)
Severity
Informational
Redfish Event Type
Alert
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0070

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The drawer of the storage enclosure is opened while hot-plugging the drives.
Detailed Description
The drawer of the storage enclosure is opened while hot-plugging the drives.
Recommended Response Action
Close the drawer of the storage enclosure. For information about managing SAS IOM devices, refer to OpenManage Enterprise Modular Version Users Guide available on the support site.
Category
System Health (SIOM = SAS IOM)
Severity
Warning
Redfish Event Type
Alert
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0071

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
One of the hot-swappable expanders of the storage enclosures is unable to update the firmware version (with no recovery option).
Detailed Description
One of the hot-swappable expanders of the storage enclosures is unable to update the firmware version (with no recovery option).
Recommended Response Action
Replace the Hot swappable expander of the storage enclosure. If the issue persists, contact your service provider. For information about managing SAS IOM devices, refer to OpenManage Enterprise Modular Version Users Guide available on the support site.
Category
System Health (SIOM = SAS IOM)
Severity
Critical
Redfish Event Type
Alert
Applicable Event or Alert Types
No alerts are applicable for this message

SIOM0072

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The SAS IOM has a degraded SAS connection between IOM arg1 and storage enclosure in chassis slot arg2.
Arguments
  • arg1 = IOM NAME
  • arg2 = Chassis Slot Name
Detailed Description
The SAS IOM has a degraded SAS connection between a SAS IOM and a storage enclosure identified in the message.
Recommended Response Action
Do the following: 1) Make sure that the compute sleds that have storage assignment to affected storage enclosures are turned off and then reseat the storage enclosure. 2) If the issue persists, reseat the storage expanders one at a time. 3) If problem persists, reseat the IOM.
Category
System Health (SIOM = SAS IOM)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\