Dell OpenManage Enterprise-Modular Edition Version 2.20.10 for PowerEdge MX7000 Chassis RACADM Command Line Reference Guide

racadm deploy -m server-<n> -u root -p <password> -s <ipaddress> <subnet> <gateway>

racadm deploy -m server-<n> -u root -p <password> -s -6 <ipv6Address> <prefixlen> <gateway>

racadm deploy -m server-<n> -u root -p <password> -d [-6]

racadm deploy -m switch-<n> -u root -p <password>

racadm deploy -m switch-<n> -v SNMPv2 <snmpCommunityString> ro

racadm deploy -a [server|switch] -u root -p <password>

• -m—<module>—must be one of the following values:
  • server
  • switch
• -a—[server|switch]—applies options to all modules present in the chassis of the given module type; if specified must be one of the following values:
  • server
  • switch
  If the module type is not specified, the default type is server.
  NOTE:Switches must support Ethernet management.
• -u—the username for servers must be 'root'.
• -p—password for the given username. For a server, the password must be 1-20 characters with ASCII values in the 32-126 range. The special characters, &, (), and, && are not supported in passwords.
  NOTE:The MXG610s IOM does not support colon, ":", in passwords.
  NOTE:You can configure only the "root" user password for servers, using the deploy command.
• -s—The <ipaddress> <subnet> <gateway> sets static IPV4 network configuration for the server. The <ipAddress>, <netmask>, and <gateway> must be typed as dotted decimal strings.
• -s
  • The attribute string, <ipaddress> <subnet> <gateway>, sets static IPV4 network configuration for the server. The attributes, <ipAddress>, <netmask>, and <gateway> must be typed as dotted decimal strings.
  • The attribute string, -6 <ipv6Address> <prefixlen> <gateway>, sets static IPV6 network configuration for the server. The attributes, <ipv6Address> and <gateway> must be entered as colon separated IPV6 strings.
• -d—enables DHCP for the specified server.
• -d—[-6]—enables DHCP for the specified server. The -6 option enables IPV6 autoconfiguration.
• -v—The SNMPv2 <snmpCommunityString> ro string sets the protocol version to SNMPv2.

• Set root password, configure static IPv4 address for server-1

  racadm deploy -m server-1 -u root -p <password> -s 192.168.0.20 255.255.255.0 192.168.0.1

• Set root password, configure static IPv6 address for server-1

  racadm deploy -m server-1 -u root -p <password> -s -6 2001:DB8::2 64 2001:DB8::1

• Set root password and enable DHCP for server-3

  racadm deploy -m server-3 -u root -p <password> -d

• Set root password and enable IPv6 DHCP for server-3

  racadm deploy -m server-3 -u root -p <password> -d -6

• Set password for switch-1

  racadm deploy -m switch-1 -u root -p <password>

• Set SNMPv2 community string for switch-1

  racadm deploy -m switch-1 -v SNMPv2 DemoCommunityString ro

• Set SNMPv1 community string for switch-5

  racadm deploy -m switch-5 -v SNMPv1 CommStrPart1,CommStrPart2,CommStrPart3 ro

• Set root password for all servers

  racadm deploy -a -u root -p <password>

  NOTE:Follow the password guidelines to set the root password. For more information regarding the password guidelines, see the Dell OpenManage Enterprise-Modular Edition for PowerEdge MX7000 Chassis User's Guide.
• Set password for all switches

  racadm deploy -a switch -u root -p <password>