Dell OpenManage Enterprise-Modular Edition Version 2.20.10 for PowerEdge MX7000 Chassis RACADM Command Line Reference Guide

racadm getconfig -g <group> [-m <module>]

racadm getconfig -g <group> -o <object> [-m <module>]

racadm getconfig -g <group> -i <index>

racadm getconfig -g <group> -o <object> -i <index>

racadm getconfig -h

• -g—Specifies the configuration group to display
• -o—Specifies the configuration object to display. This option is used with -g.
• -i—Specifies the index of indexed group. This option is used with -g.
• -m—The <module> must have one of the following values:
  • storage-<n>—Where n = 1 to 8
  NOTE:The storage-<n> option is available only for cfgStorageModule.
• -h—Displays all the available configuration groups.

• Display an entire group, in this case the LAN networking:

  racadm getconfig -g cfgLanNetworking

• Display a single object from a particular group:

  racadm getconfig -g cfgLanNetworking -o cfgDNSRacName

• Display an indexed group:

  racadm getconfig -g cfgUserAdmin -o cfgUserAdminPassword -i 2

• Display information about the service tag of the storage module:

  racadm getconfig -g cfgStorageModule -m storage-<1 to 8> -o cfgStorageModuleServiceTag

• Display all available configuration groups:

  racadm getconfig -h

• Display the maximum number of authentication attempts permitted per connection:

  racadm getconfig -g cfgRacTuning -o cfgRacTuneMaxAuthRetries

  The default value is "3".