Dell OpenManage Enterprise-Modular Edition Version 2.20.10 for PowerEdge MX7000 Chassis RACADM Command Line Reference Guide

racadm getpminfo

racadm getpminfo

[Real-Time Power Statistics]
System Input Power                              = 616 W (2101 BTU/h)
Peak System Power                               = 628 W (2142 BTU/h)
Peak System Power Start Time                    = Not Applicable
Peak System Power Timestamp                     = 11:37:36 08/08/2018
Minimum System Power                            = 606 W (2067 BTU/h)
Minimum System Power Start Time                 = Not Applicable
Minimum System Power Timestamp                  = 10:16:08 08/06/2018
System Idle Power                               = Not Applicable
System Potential Power                          = Not Applicable
System Input Current Reading                    = Not Applicable


[Real-Time Energy Statistics]
System Energy Consumption                       = 204 kWh
System Energy Consumption Start Time            = Not Applicable
System Energy Consumption Timestamp             = 05:47:05 08/20/2018


[System Power Status]
Chassis Power State                             = ON
Overall Power Health                            = Not OK
Redundancy                                      = No


[System Power Policy Configuration]
System Input Power Cap                          = Disabled
Redundancy Policy                               = None
Dynamic PSU Engagement Enabled                  = Not Applicable


[Power Budgeting]
System Input Max Power Capacity                 = 11571 W
Input Redundancy Reserve                        = Not Applicable
Input Power Allocated to Servers                = Not Applicable
Input Power Allocated to Chassis Infrastructure = Not Applicable
Total Input Power Available for Allocation      = 2384 W (8134 BTU/h)
Standby Input Power Capacity                    = Not Applicable