
Dell PowerEdge R360 Installation and Service Manual
Thermal restriction matrix
| Heat sink | Configuration No |
|---|---|
| 1U HSK | All configurations |
| Label | Description |
|---|---|
| STD | Standard |
| LP | Low profile |
| FH | Full height |
| Configuration |
Configuration 1 2.5 inch and 3.5 inch Drives With Riser |
Configuration 2 2.5 inch and 3.5 inch Drives With N1- BOSS |
Configuration 3 2.5 inch and 3.5 inch Drives Without Riser and N1 - BOSS |
Ambient temperature | ||
|---|---|---|---|---|---|---|
| CPU TDP/cTDP | ≤ 80 W | 4 x STD Fans 1U STD HSK |
1 x
Silver Fan, 3 x STD Fans 1U STD HSK |
3 x STD
Fan 1U STD HSK |
35°C (95°F) | |
| 95 W | 4 x STD Fans
1U Performance HSK |
1 x
Silver Fan, 3 x STD 1U Performance HSK |
3 x STD
Fan 1U Performance HSK |
35°C (95°F) | ||
NOTE:Refer to the ASHRAE A3/A4 environment specifications under Appendix A
for detailed configuration limitation.
| Configuration |
Configuration 1 2.5 inch and 3.5 inch Drives With Riser |
Configuration 2 2.5 inch and 3.5 inch Drives With N1- BOSS |
Configuration 3 2.5 inch and 3.5 inch Drives Without Riser and N1 - BOSS |
Ambient temperature | ||
|---|---|---|---|---|---|---|
| CPU TDP/cTDP | ≤ 80 W | 4 x STD Fans 1U STD HSK |
1 x
Silver Fan, 3 x STD Fans 1U STD HSK |
N/A | 35°C (95°F) | |
| 95 W | 4 x STD Fans
1U Performance HSK |
1 x
Silver Fan, 3x STD 1U Performance HSK |
N/A | 35°C (95°F) | ||
NOTE:When A2 GPU card is populated, PCIe
slot 2 has to be populated or should have a blank installed.
| Chassis | Configuration | Fan Quantity | Fan Location |
|---|---|---|---|
| 2.5 inch and 3.5 inch Drives | With Riser Card | 4 | Fan 1 (STD), Fan 2, Fan 3, Fan 4 |
| 2.5 inch and 3.5 inch Drives | With N1-BOSS Module | 4 | Fan 1 (Silver), Fan 2, Fan 3, Fan 4 |
| 2.5 inch and 3.5 inch Drives | Without Riser and N1- BOSS Module | 3 | Fan 2, Fan 3, Fan 4 |
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\