Dell PowerEdge R530xd Owner's Manual
Integrated Devices screen details
The Integrated Devices screen allows you to view and configure the settings of all integrated devices including the video controllerand the USB ports.
About this task
| Menu Item | Description |
| USB 3.0 Setting | Allows you to enable or disable the USB 3.0 support. Enable this option only if your operating system supports USB 3.0. Disabling this allows devices to operate at USB 2.0 speed. USB 3.0 is disabled by default. |
| User Accessible USB Ports | Allows you to enable or disable the USB ports. Selecting Only Back Ports On disables the front USB ports and selecting All Ports Off disables all USB ports. The USB keyboard and mouse operates during boot process in certain operating systems. After the boot process is complete, the USB keyboard and mouse do not work if the ports are disabled. |
| Internal USB Port | Allows you to enable or disable the internal USB port. By default, the Internal USB Port option is set to Enabled. |
| Embedded NIC1 and NIC2 | Allows you to enable or disable the Embedded NIC1 and NIC2. If set to Disabled, the NIC may still be available for shared network access by the embedded management controller. Configure this function using the NIC management utilities of the system. |
| I/OAT DMA Engine | Allows you to enable or disable the I/OAT option. Enable only if the hardware and software supports the feature. |
| Embedded Video Controller | Allows you to enable or disable the Embedded Video Controller . By default, the embedded video controller is Enabled. If the Embedded Video Controller is the only display capability in the system (that is, no add-in graphics card is installed), then the Embedded Video Controller is automatically used as the primary display even if the Embedded Video Controller setting is Disabled. |
| Current State of Embedded Video Controller | Displays the current state of the Embedded Video Controller. Current State of Embedded Video Controller is a read only field, indicating the current state for the Embedded Video Controller. |
| SR-IOV Global Enable | Allows you to enable or disable the BIOS configuration of Single Root I/O Virtualization (SR-IOV) devices. By default, the SR-IOV Global Enable option is set to Disabled. |
| OS Watchdog Timer | If your system stops responding, this watchdog timer aids in the recovery of your operating system. When this field is set to Enabled, the operating system is allowed to initialize the timer. When is the field is set to Disabled (the default), the timer will have no effect on the system. |
| Memory Mapped I/O above 4 GB | Allows you to enable support for PCIe devices that require large amounts of memory. By default, the option is set to Enabled. |
| Slot Disablement | Allows you to enable or disable the available PCIe slots on your system. The Slot Disablement feature controls the configuration of PCIe cards installed in the specified slot. Slot disablement must be used only when the installed peripheral card is preventing booting into the operating system or causing delays in system startup. If the slot is disabled, both the Option ROM and UEFI driver are disabled. |
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\