Integrated Dell Remote Access Controller 9 Attribute Registry
FC Attributes
FC.FCDevice.BusDeviceFunction (Read Only)
- Description
- Indicates the PCI Address of the Physical Function assigned to the port.
- Legal Values
- String of up to 8 ASCII characters.
- Default Value
- None
- Write Privilege
- N/A
- License Required
- Express License
- Dependency
- None
FC.FCDevice.ChipMdl (Read Only)
- Description
- No description information available.
- Legal Values
- String of ASCII characters.
- Default Value
- None
- Write Privilege
- N/A
- License Required
- Express License
- Dependency
- None
FC.FCDevice.EFIVersion (Read Only)
- Description
- No description information available.
- Legal Values
- String of ASCII characters.
- Default Value
- None
- Write Privilege
- N/A
- License Required
- Express License
- Dependency
- None
FC.FCDevice.FamilyVersion (Read Only)
- Description
- No description information available.
- Legal Values
- String of up to 8 ASCII characters.
- Default Value
- None
- Write Privilege
- N/A
- License Required
- Express License
- Dependency
- None
FC.FCDevice.PCIDeviceID (Read Only)
- Description
- No description information available.
- Legal Values
- String of up to 4 ASCII characters.
- Default Value
- None
- Write Privilege
- N/A
- License Required
- Express License
- Dependency
- None
FC.FCTarget.BootScanSelection (Read or Write)
- Description
- Specifies the adapter initiator behavior for booting the system from specified Fibre Channel boot target(s) or fabric discovered target(s)
- Legal Values
- Disabled
- Specified LUN
- First LUN
- First LUN 0
- First NOT LUN 0
- Fabric Discovered
- Default Value
- Disabled
- Write Privilege
- N/A
- License Required
- Express License
- Dependency
- None
FC.FCTarget.FirstFCTargetLUN (Read or Write)
- Description
- Specifies the LUN (Logical Unit Number) of the first Fibre Channel boot target
- Legal Values
- Integer values.
- Default Value
- None
- Write Privilege
- N/A
- License Required
- Express License
- Dependency
- None
FC.FCTarget.FirstFCTargetWWPN (Read or Write)
- Description
- Specifies the World Wide Port Name of the first Fibre Channel boot target
- Legal Values
- String of up to 23 ASCII characters.
- Default Value
- None
- Write Privilege
- N/A
- License Required
- Express License
- Dependency
- None
FC.FCTarget.SecondFCTargetLUN (Read or Write)
- Description
- Specifies the LUN (Logical Unit Number) of the second Fibre Channel boot target
- Legal Values
- Integer values.
- Default Value
- None
- Write Privilege
- N/A
- License Required
- Express License
- Dependency
- None
FC.FCTarget.SecondFCTargetWWPN (Read or Write)
- Description
- Specifies the World Wide Port Name of the second Fibre Channel boot target
- Legal Values
- String of up to 23 ASCII characters.
- Default Value
- None
- Write Privilege
- N/A
- License Required
- Express License
- Dependency
- None
FC.HBAConfig.EighthNVMeTargetNQN (Read or Write)
- Description
- Specify the eighth targets NVMe Qualified Name
- Legal Values
- String of up to 223 ASCII characters.
- Default Value
- None
- Write Privilege
- N/A
- License Required
- Not Applicable
- Dependency
- None
FC.HBAConfig.EighthNVMeTargetWWNN (Read or Write)
- Description
- Specify the World Wide Node Name of the eighth NVMe boot target
- Legal Values
- String of up to 23 ASCII characters.
- Default Value
- None
- Write Privilege
- N/A
- License Required
- Not Applicable
- Dependency
- None
FC.HBAConfig.EighthNVMeTargetWWPN (Read or Write)
- Description
- Specify the World Wide Port Name of the eighth NVMe boot target
- Legal Values
- String of up to 23 ASCII characters.
- Default Value
- None
- Write Privilege
- N/A
- License Required
- Not Applicable
- Dependency
- None
FC.HBAConfig.EighthNVMeTgtCntlrID (Read or Write)
- Description
- Specify the Controller ID of the eighth NVMe boot target.[VENDOR: specify format of value]
- Legal Values
- String of up to 4 ASCII characters.
- Default Value
- None
- Write Privilege
- N/A
- License Required
- Not Applicable
- Dependency
- None
FC.HBAConfig.EighthNVMeTgtConn (Read or Write)
- Description
- Setting to enable whether connection to the eighth NVMe Target is attempted
- Legal Values
- Enabled
- Disabled
- Default Value
- Disabled
- Write Privilege
- N/A
- License Required
- Not Applicable
- Dependency
- None
FC.HBAConfig.EighthNVMeTgtNSID (Read or Write)
- Description
- Specify the Namespace ID of the eighth NVMe boot target to access.[VENDOR: specify format of value]
- Legal Values
- String of up to 8 ASCII characters.
- Default Value
- None
- Write Privilege
- N/A
- License Required
- Not Applicable
- Dependency
- None
FC.HBAConfig.EnableNVMeBoot (Read or Write)
- Description
- Specifies the ports behavior for booting the system from specified NVMe boot target(s)
- Legal Values
- Disabled
- Enabled
- Default Value
- Disabled
- Write Privilege
- N/A
- License Required
- Not Applicable
- Dependency
- None
FC.HBAConfig.FCTape (Read or Write)
- Description
- Specifies the state of Fibre Channel Tape support
- Legal Values
- Enabled
- Disabled
- Default Value
- Disabled
- Write Privilege
- N/A
- License Required
- Express License
- Dependency
- None
FC.HBAConfig.FabricLoginRetryCount (Read or Write)
- Description
- Specifies the number of times the initiator will attempt to login to devices on the Storage Area Network
- Legal Values
- Integer values.
- Default Value
- 3
- Write Privilege
- N/A
- License Required
- Express License
- Dependency
- None
FC.HBAConfig.FabricLoginTimeout (Read or Write)
- Description
- Specifies the time in milliseconds that the initiator waits before it tries to login to the Fibre Channel Storage Area Network Fabric again
- Legal Values
- Integer values from 1 to 255000.
- Default Value
- 3000
- Write Privilege
- N/A
- License Required
- Express License
- Dependency
- None
FC.HBAConfig.FifthNVMeTargetNQN (Read or Write)
- Description
- Specify the fifth targets NVMe Qualified Name
- Legal Values
- String of up to 223 ASCII characters.
- Default Value
- None
- Write Privilege
- N/A
- License Required
- Not Applicable
- Dependency
- None
FC.HBAConfig.FifthNVMeTargetWWNN (Read or Write)
- Description
- Specify the World Wide Node Name of the fifth NVMe boot target
- Legal Values
- String of up to 23 ASCII characters.
- Default Value
- None
- Write Privilege
- N/A
- License Required
- Not Applicable
- Dependency
- None
FC.HBAConfig.FifthNVMeTargetWWPN (Read or Write)
- Description
- Specify the World Wide Port Name of the fifth NVMe boot target
- Legal Values
- String of up to 23 ASCII characters.
- Default Value
- None
- Write Privilege
- N/A
- License Required
- Not Applicable
- Dependency
- None
FC.HBAConfig.FifthNVMeTgtCntlrID (Read or Write)
- Description
- Specify the Controller ID of the fifth NVMe boot target.[VENDOR: specify format of value]
- Legal Values
- String of up to 4 ASCII characters.
- Default Value
- None
- Write Privilege
- N/A
- License Required
- Not Applicable
- Dependency
- None
FC.HBAConfig.FifthNVMeTgtConn (Read or Write)
- Description
- Setting to enable whether connection to the fifth NVMe Target is attempted
- Legal Values
- Enabled
- Disabled
- Default Value
- Disabled
- Write Privilege
- N/A
- License Required
- Not Applicable
- Dependency
- None
FC.HBAConfig.FifthNVMeTgtNSID (Read or Write)
- Description
- Specify the Namespace ID of the fifth NVMe boot target to access.[VENDOR: specify format of value]
- Legal Values
- String of up to 8 ASCII characters.
- Default Value
- None
- Write Privilege
- N/A
- License Required
- Not Applicable
- Dependency
- None
FC.HBAConfig.FirstNVMeTargetNQN (Read or Write)
- Description
- Specify the first targets NVMe Qualified Name
- Legal Values
- String of up to 223 ASCII characters.
- Default Value
- None
- Write Privilege
- N/A
- License Required
- Not Applicable
- Dependency
- None
FC.HBAConfig.FirstNVMeTargetWWNN (Read or Write)
- Description
- Specify the World Wide Node Name of the first NVMe boot target
- Legal Values
- String of up to 23 ASCII characters.
- Default Value
- None
- Write Privilege
- N/A
- License Required
- Not Applicable
- Dependency
- None
FC.HBAConfig.FirstNVMeTargetWWPN (Read or Write)
- Description
- Specify the World Wide Port Name of the first NVMe boot target
- Legal Values
- String of up to 23 ASCII characters.
- Default Value
- None
- Write Privilege
- N/A
- License Required
- Not Applicable
- Dependency
- None
FC.HBAConfig.FirstNVMeTgtCntlrID (Read or Write)
- Description
- Specify the Controller ID of the first NVMe boot target.[VENDOR: specify format of value]
- Legal Values
- String of up to 4 ASCII characters.
- Default Value
- None
- Write Privilege
- N/A
- License Required
- Not Applicable
- Dependency
- None
FC.HBAConfig.FirstNVMeTgtConn (Read or Write)
- Description
- Setting to enable whether connection to the first NVME target is attempted
- Legal Values
- Enabled
- Disabled
- Default Value
- Disabled
- Write Privilege
- N/A
- License Required
- Not Applicable
- Dependency
- None
FC.HBAConfig.FirstNVMeTgtNSID (Read or Write)
- Description
- Specify the Namespace ID of the first NVMe boot target to access.[VENDOR: specify format of value]
- Legal Values
- String of up to 8 ASCII characters.
- Default Value
- None
- Write Privilege
- N/A
- License Required
- Not Applicable
- Dependency
- None
FC.HBAConfig.FourthNVMeTargetNQN (Read or Write)
- Description
- Specify the fourth targets NVMe Qualified Name
- Legal Values
- String of up to 223 ASCII characters.
- Default Value
- None
- Write Privilege
- N/A
- License Required
- Not Applicable
- Dependency
- None
FC.HBAConfig.FourthNVMeTargetWWNN (Read or Write)
- Description
- Specify the World Wide Node Name of the fourth NVMe boot target
- Legal Values
- String of up to 23 ASCII characters.
- Default Value
- None
- Write Privilege
- N/A
- License Required
- Not Applicable
- Dependency
- None
FC.HBAConfig.FourthNVMeTargetWWPN (Read or Write)
- Description
- Specify the World Wide Port Name of the fourth NVMe boot target
- Legal Values
- String of up to 23 ASCII characters.
- Default Value
- None
- Write Privilege
- N/A
- License Required
- Not Applicable
- Dependency
- None
FC.HBAConfig.FourthNVMeTgtCntlrID (Read or Write)
- Description
- Specify the Controller ID of the fourth NVMe boot target.[VENDOR: specify format of value]
- Legal Values
- String of up to 4 ASCII characters.
- Default Value
- None
- Write Privilege
- N/A
- License Required
- Not Applicable
- Dependency
- None
FC.HBAConfig.FourthNVMeTgtConn (Read or Write)
- Description
- Setting to enable whether connection to the fourth NVMe Target is attempted
- Legal Values
- Enabled
- Disabled
- Default Value
- Disabled
- Write Privilege
- N/A
- License Required
- Not Applicable
- Dependency
- None
FC.HBAConfig.FourthNVMeTgtNSID (Read or Write)
- Description
- Specify the Namespace ID of the fourth NVMe boot target to access.[VENDOR: specify format of value]
- Legal Values
- String of up to 8 ASCII characters.
- Default Value
- None
- Write Privilege
- N/A
- License Required
- Not Applicable
- Dependency
- None
FC.HBAConfig.FramePayloadSize (Read or Write)
- Description
- Specifies the maximum Fibre Channel frame payload size in bytes
- Legal Values
- Auto
- 512
- 1024
- 2048
- 2112
- Default Value
- Auto
- Write Privilege
- N/A
- License Required
- Express License
- Dependency
- None
FC.HBAConfig.HardZone (Read or Write)
- Description
- Specifies the state of Fibre Channel hard zoning
- Legal Values
- Enabled
- Disabled
- Default Value
- Disabled
- Write Privilege
- N/A
- License Required
- Express License
- Dependency
- None
FC.HBAConfig.HardZoneAddress (Read or Write)
- Description
- Specifies the Hard Zone address to be used if Fibre Channel hard zoning is enabled
- Legal Values
- Integer values.
- Default Value
- 0
- Write Privilege
- N/A
- License Required
- Express License
- Dependency
- None
FC.HBAConfig.LinkDownTimeout (Read or Write)
- Description
- Specifies the number of milliseconds the Fibre Channel uplink port can be offline before the system is notified that the SAN fabric connectivity is lost and the uplink port is marked as being down
- Legal Values
- Integer values from 1 to 255000.
- Default Value
- 3000
- Write Privilege
- N/A
- License Required
- Express License
- Dependency
- None
FC.HBAConfig.LoopResetDelay (Read or Write)
- Description
- Specifies the Fibre Channel Arbitrated Loop Reset Delay for the port. After resetting the loop, the adapter firmware refrains from initiating any loop activity for the number of seconds specified in this setting
- Legal Values
- Integer values from 0 to 60.
- Default Value
- 5
- Write Privilege
- N/A
- License Required
- Express License
- Dependency
- None
FC.HBAConfig.PortDownRetryCount (Read or Write)
- Description
- Specifies the number of times the Fibre Channel uplink port will try reconnecting to a target port before the port is marked as being down
- Legal Values
- Integer values.
- Default Value
- None
- Write Privilege
- N/A
- License Required
- Express License
- Dependency
- None
FC.HBAConfig.PortDownTimeout (Read or Write)
- Description
- Specifies the timeout in milliseconds that the Fibre Channel uplink port will wait before trying to reconnect to a target device port before the port is marked as down
- Legal Values
- Integer values from 1 to 255000.
- Default Value
- 3000
- Write Privilege
- N/A
- License Required
- Express License
- Dependency
- None
FC.HBAConfig.PortLoginRetryCount (Read or Write)
- Description
- Specifies the number of times the adapter firmware initiator will try logging into a target device port
- Legal Values
- Integer values.
- Default Value
- 3
- Write Privilege
- N/A
- License Required
- Express License
- Dependency
- None
FC.HBAConfig.PortLoginTimeout (Read or Write)
- Description
- Specifies the timeout in milliseconds that the initiator uses when attempting to login to the target device port
- Legal Values
- Integer values from 1 to 255000.
- Default Value
- 3000
- Write Privilege
- N/A
- License Required
- Express License
- Dependency
- None
FC.HBAConfig.SecondNVMeTargetNQN (Read or Write)
- Description
- Specify the second targets NVMe Qualified Name
- Legal Values
- String of up to 223 ASCII characters.
- Default Value
- None
- Write Privilege
- N/A
- License Required
- Not Applicable
- Dependency
- None
FC.HBAConfig.SecondNVMeTargetWWNN (Read or Write)
- Description
- Specify the World Wide Node Name of the second NVMe boot target
- Legal Values
- String of up to 23 ASCII characters.
- Default Value
- None
- Write Privilege
- N/A
- License Required
- Not Applicable
- Dependency
- None
FC.HBAConfig.SecondNVMeTargetWWPN (Read or Write)
- Description
- Specify the World Wide Port Name of the second NVMe boot target
- Legal Values
- String of up to 23 ASCII characters.
- Default Value
- None
- Write Privilege
- N/A
- License Required
- Not Applicable
- Dependency
- None
FC.HBAConfig.SecondNVMeTgtCntlrID (Read or Write)
- Description
- Specify the Controller ID of the second NVMe boot target. [VENDOR: specify format of value]
- Legal Values
- String of up to 4 ASCII characters.
- Default Value
- None
- Write Privilege
- N/A
- License Required
- Not Applicable
- Dependency
- None
FC.HBAConfig.SecondNVMeTgtConn (Read or Write)
- Description
- Setting to enable whether connection to the second NVMe Target is attempted
- Legal Values
- Enabled
- Disabled
- Default Value
- Disabled
- Write Privilege
- N/A
- License Required
- Not Applicable
- Dependency
- None
FC.HBAConfig.SecondNVMeTgtNSID (Read or Write)
- Description
- Specify the Namespace ID of the second NVMe boot target to access
- Legal Values
- String of up to 8 ASCII characters.
- Default Value
- None
- Write Privilege
- N/A
- License Required
- Not Applicable
- Dependency
- None
FC.HBAConfig.SeventhNVMeTargetNQN (Read or Write)
- Description
- Specify the seventh targets NVMe Qualified Name
- Legal Values
- String of up to 223 ASCII characters.
- Default Value
- None
- Write Privilege
- N/A
- License Required
- Not Applicable
- Dependency
- None
FC.HBAConfig.SeventhNVMeTargetWWNN (Read or Write)
- Description
- Specify the World Wide Node Name of the seventh NVMe boot target
- Legal Values
- String of up to 23 ASCII characters.
- Default Value
- None
- Write Privilege
- N/A
- License Required
- Not Applicable
- Dependency
- None
FC.HBAConfig.SeventhNVMeTargetWWPN (Read or Write)
- Description
- Specify the World Wide Port Name of the seventh NVMe boot target
- Legal Values
- String of up to 23 ASCII characters.
- Default Value
- None
- Write Privilege
- N/A
- License Required
- Not Applicable
- Dependency
- None
FC.HBAConfig.SeventhNVMeTgtCntlrID (Read or Write)
- Description
- Specify the Controller ID of the seventh NVMe boot target.[VENDOR: specify format of value]
- Legal Values
- String of up to 4 ASCII characters.
- Default Value
- None
- Write Privilege
- N/A
- License Required
- Not Applicable
- Dependency
- None
FC.HBAConfig.SeventhNVMeTgtConn (Read or Write)
- Description
- Setting to enable whether connection to the seventh NVMe Target is attempted
- Legal Values
- Enabled
- Disabled
- Default Value
- Disabled
- Write Privilege
- N/A
- License Required
- Not Applicable
- Dependency
- None
FC.HBAConfig.SeventhNVMeTgtNSID (Read or Write)
- Description
- Specify the Namespace ID of the seventh NVMe boot target to access.[VENDOR: specify format of value]
- Legal Values
- String of up to 8 ASCII characters.
- Default Value
- None
- Write Privilege
- N/A
- License Required
- Not Applicable
- Dependency
- None
FC.HBAConfig.SixthNVMeTargetNQN (Read or Write)
- Description
- Specify the sixth targets NVMe Qualified Name
- Legal Values
- String of up to 223 ASCII characters.
- Default Value
- None
- Write Privilege
- N/A
- License Required
- Not Applicable
- Dependency
- None
FC.HBAConfig.SixthNVMeTargetWWNN (Read or Write)
- Description
- Specify the World Wide Node Name of the sixth NVMe boot target
- Legal Values
- String of up to 23 ASCII characters.
- Default Value
- None
- Write Privilege
- N/A
- License Required
- Not Applicable
- Dependency
- None
FC.HBAConfig.SixthNVMeTargetWWPN (Read or Write)
- Description
- Specify the World Wide Port Name of the sixth NVMe boot target
- Legal Values
- String of up to 23 ASCII characters.
- Default Value
- None
- Write Privilege
- N/A
- License Required
- Not Applicable
- Dependency
- None
FC.HBAConfig.SixthNVMeTgtCntlrID (Read or Write)
- Description
- Specify the Controller ID of the sixth NVMe boot target.[VENDOR: specify format of value]
- Legal Values
- String of up to 4 ASCII characters.
- Default Value
- None
- Write Privilege
- N/A
- License Required
- Not Applicable
- Dependency
- None
FC.HBAConfig.SixthNVMeTgtConn (Read or Write)
- Description
- Setting to enable whether connection to the sixth NVMe Target is attempted
- Legal Values
- Enabled
- Disabled
- Default Value
- Disabled
- Write Privilege
- N/A
- License Required
- Not Applicable
- Dependency
- None
FC.HBAConfig.SixthNVMeTgtNSID (Read or Write)
- Description
- Specify the Namespace ID of the sixth NVMe boot target to access.[VENDOR: specify format of value]
- Legal Values
- String of up to 8 ASCII characters.
- Default Value
- None
- Write Privilege
- N/A
- License Required
- Not Applicable
- Dependency
- None
FC.HBAConfig.ThirdNVMeTargetNQN (Read or Write)
- Description
- Specify the third targets NVMe Qualified Name
- Legal Values
- String of up to 223 ASCII characters.
- Default Value
- None
- Write Privilege
- N/A
- License Required
- Not Applicable
- Dependency
- None
FC.HBAConfig.ThirdNVMeTargetWWNN (Read or Write)
- Description
- Specify the World Wide Node Name of the third NVMe boot target
- Legal Values
- String of up to 23 ASCII characters.
- Default Value
- None
- Write Privilege
- N/A
- License Required
- Not Applicable
- Dependency
- None
FC.HBAConfig.ThirdNVMeTargetWWPN (Read or Write)
- Description
- Specify the World Wide Port Name of the third NVMe boot target
- Legal Values
- String of up to 23 ASCII characters.
- Default Value
- None
- Write Privilege
- N/A
- License Required
- Not Applicable
- Dependency
- None
FC.HBAConfig.ThirdNVMeTgtCntlrID (Read or Write)
- Description
- Specify the Controller ID of the third NVMe boot target.[VENDOR: specify format of value]
- Legal Values
- String of up to 4 ASCII characters.
- Default Value
- None
- Write Privilege
- N/A
- License Required
- Not Applicable
- Dependency
- None
FC.HBAConfig.ThirdNVMeTgtConn (Read or Write)
- Description
- Setting to enable whether connection to the third NVMe Target is attempted
- Legal Values
- Enabled
- Disabled
- Default Value
- Disabled
- Write Privilege
- N/A
- License Required
- Not Applicable
- Dependency
- None
FC.HBAConfig.ThirdNVMeTgtNSID (Read or Write)
- Description
- Specify the Namespace ID of the third NVMe boot target to access.[VENDOR: specify format of value]
- Legal Values
- String of up to 8 ASCII characters.
- Default Value
- None
- Write Privilege
- N/A
- License Required
- Not Applicable
- Dependency
- None
FC.PortConfig.DeviceName (Read Only)
- Description
- Product name of the Fibre Channel Host Bus Adapter.
- Legal Values
- String of ASCII characters.
- Default Value
- None
- Write Privilege
- N/A
- License Required
- Express License
- Dependency
- None
FC.PortConfig.PortNumber (Read Only)
- Description
- The Fibre Channel Host Bus Adapter port number as labeled externally on the adapter.
- Legal Values
- Integer values.
- Default Value
- None
- Write Privilege
- N/A
- License Required
- Express License
- Dependency
- None
FC.PortConfig.PortSpeed (Read or Write)
- Description
- Specifies the data rate of the Fibre Channel Host Bus Adapter port. Value can be Automatic or specified in Gbps.
- Legal Values
- Auto
- 1 Gbps
- 2 Gbps
- 4 Gbps
- 8 Gbps
- 16 Gbps
- 32 Gbps
- Default Value
- Auto
- Write Privilege
- N/A
- License Required
- Express License
- Dependency
- None
FC.PortConfig.VirtualWWN (Read or Write)
- Description
- Virtual Fibre Channel World Wide Node Name is used instead of the permanent World Wide Node Name when its value is different
- Legal Values
- String of up to 23 ASCII characters.
- Default Value
- None
- Write Privilege
- N/A
- License Required
- Express License
- Dependency
- None
FC.PortConfig.VirtualWWPN (Read or Write)
- Description
- Virtual Fibre Channel World Wide Port Name of the port is used instead of the permanent World Wide Port Name when its value is different
- Legal Values
- String of up to 23 ASCII characters.
- Default Value
- None
- Write Privilege
- N/A
- License Required
- Express License
- Dependency
- None
FC.PortConfig.WWN (Read Only)
- Description
- Permanent Fibre Channel World Wide Node Name assigned during manufacturing.
- Legal Values
- String of up to 23 ASCII characters.
- Default Value
- None
- Write Privilege
- N/A
- License Required
- Express License
- Dependency
- None
FC.PortConfig.WWPN (Read Only)
- Description
- Permanent Fibre Channel World Wide Port Name assigned to the port during manufacturing
- Legal Values
- String of up to 23 ASCII characters.
- Default Value
- None
- Write Privilege
- N/A
- License Required
- Express License
- Dependency
- None
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\