Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell EMC PowerEdge RAID Controller CLI Reference Guide

PDF

Locate drives commands

The PERC Command Line Tool supports the following commands to locate a drive and activate the physical disk activity LED:

perccli /cx[/ex]/sx start locate 
perccli /cx[/ex]/sx stop locate

The detailed description for each command follows.

perccli /cx[/ex]/sx start locate

This command locates a drive and activates the drive’s LED.

Input example:

perccli /c0/e56/s1 start locate

perccli /cx[/ex]/sx stop locate

This command stops a locate operation and deactivates the drive’s LED.

Input example:

perccli /c0/e56/s1 stop locate

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\