Dell PowerEdge RAID Controller 10 User’s Guide PERC H345, H740P, H745, and H840 Series Controllers

Changing profile using HII Configuration Utility

1. Enter the Dell PERC 10 Configuration Utility. See Navigating to Dell PERC 10 configuration utility.
2. Click Main Menu > Controller Management > Advanced Controller Management > Manage Controller Profiles.
   Current profile and profile properties are displayed.
3. Change profile using the Choose Profile option.
   NOTE:By default, eHBA mode only supports profile 23_PD240.
4. Select Set Profile.
   Click Reboot.

   NOTE:For the changes to reflect reboot is required.

   NOTE:Profile change fails:

   • if new profile supports less number of drives than the number of drives in the current topology.
   • if background operations (rebuild, copy back, full initialization, Background Initialization, Patrol Read, CC) are active.
   • if background operations start after profile change but before the system is rebooted.