Dell PowerEdge RAID Controller 10 User’s Guide PERC H345, H740P, H745, and H840 Series Controllers

Entering the HII configuration utility

1. Turn on the system.
2. While the system startup, press <F2> to enter System Setup.
3. Click Device Settings.
   Device Settings screen lists all the RAID controllers in the system.

   To access the management menu for the controller, use the arrow keys or the mouse.

   NOTE:For more information in all the options, click Help that is available on the top right-hand corner of the browser screen. Help information for individual option menus can also be viewed by scrolling down on each option.

   NOTE:Some of the options within the HII configuration utility are not present if the controller does not support the corresponding feature. Options may also be grayed out if the feature is not applicable to the current configuration.