Dell PowerEdge RAID Controller 10 User’s Guide PERC H345, H740P, H745, and H840 Series Controllers

Managing link speed

1. Enter the Dell PERC 10 Configuration Utility. See Navigating to Dell PERC 10 configuration utility.
2. Click Main Menu > Controller Management > Advanced Controller Management.
3. Click Manage Link Speed.
   You can view/change the physical disk settings for the controller, if required. The possible options are:

   • Auto
   • 3 Gbps
   • 6 Gbps
   • 12 Gbps
4. Click Ok to save the changes.
   NOTE:To reflect the changes, perform an AC power cycle that is disconnecting and reconnecting the power source.