Dell PowerEdge RAID Controller 10 User’s Guide PERC H345, H740P, H745, and H840 Series Controllers

Performing expand virtual disk operation

1. Enter the Dell PERC 10 Configuration Utility. See Navigating to Dell PERC 10 configuration utility.
2. Click Main Menu > Virtual Disk Management.
   The list of virtual disks is displayed.
3. Select the virtual disk.
4. From the Operations drop-down menu, select Expand Virtual Disk.
   NOTE:You can view the Expand Virtual Disk feature only if there is free space available in the associated disk group.
5. Click Go.
6. To expand virtual disk, enter the percentage of available capacity, and then click Ok.
   A screen is displayed asking if you are sure you want to perform the operation.
7. Select the Confirm option.
8. Click Yes.
   The expand virtual disk operation is completed successfully.