Dell PowerEdge RAID Controller 10 User’s Guide PERC H345, H740P, H745, and H840 Series Controllers

Physical disk erase

1. Enter the Dell PERC 10 Configuration Utility. See Navigating to Dell PERC 10 configuration utility.
2. Click Main Menu > Physical Disk Management.
   The list of physical disks is displayed.
3. Select a physical disk.
4. From the Operations drop-down menu, select Physical Disk Erase.
   NOTE:If the drive installed is neither SED or ISE capable, then only the Physical Disk Erase option is displayed.
5. Click Go.
   A screen is displayed asking if you are sure you want to perform the operation.
6. Select the Confirm option.
7. Click Yes.
   The physical disk erase operation is completed successfully.