Dell PowerEdge RAID Controller 10 User’s Guide PERC H345, H740P, H745, and H840 Series Controllers

Updating PERC 10 driver for existing Windows Server 2012 R2 and newer

1. Insert the CD, DVD, or USB drive media containing the driver.
2. Select Start > Settings > Control Panel > System.
   The System Properties screen is displayed.

   NOTE:The path to System might vary depending on the operating system family.
3. Click the Hardware tab.
4. Click Device Manager.
   The Device Manager screen is displayed.

   NOTE:The path to Device Manager might vary depending on the operating system family.
5. Expand SCSI and RAID Controllers by double-clicking the entry or by clicking on the plus symbol next to SCSI and RAID Controller.
   NOTE:In Windows Server 2012 R2 and newer, the PERC 10 series of cards are listed under Storage Controllers.
6. Double-click the RAID controller for which you want to update the driver.
7. Click the Driver tab and click Update Driver.
   The screen to update the device driver wizard is displayed.
8. Select Install from a list or specific location.
9. Click Next.
10. Follow the steps in the wizard and browse to the location of the driver files.
11. Select the INF file from the CD, DVD, or USB drive media.
12. Click Next and continue the installation steps in the wizard.
13. Click Finish to exit the wizard and reboot the system for the changes to take place.
    NOTE:Dell provides the Dell Update Package (DUP) to update drivers on systems running Windows Server 2012 R2 and newer operating system. DUP is an executable application that updates drivers for specific devices. DUP supports command line interface and silent execution. For more information, see https://www.dell.com/support.