iDRAC 8/7 v2.70.70.70 RACADM CLI Guide

Lists all the subcommands available for use with RACADM and provides a short description about each subcommand. You may also type a subcommand, group, object or Fully Qualified Descriptor (FQDD) name after help.

• racadm help
• racadm help <subcommand>
• racadm help —g <groupname>
• racadm help –g <groupname> —o <objectname>

• <subcommand> — specifies the subcommand for which you need the help information.
• <device name> — specifies the device name such as iDRAC, BIOS, NIC, LifecycleController, FC, system, or Storage.
• <group> — specifies the group name supported by the corresponding device.
• <object> — specifies the object for the entered group.

• The help command displays a complete list of subcommands.
• The racadm help <subcommand> command displays information for the specified subcommand only.
• The racadm help —g <groupname> command displays information for the specified group.
• The racadm help —o <objectname> command displays information for the specified object.
• The racadm help <device name> <Group> command displays information for the specified group.
• The racadm help <device name> <Object> command displays information for the specified object.
• The racadm help <device name> <Group> <Object> command displays information for the specified object.