Dell EMC PowerEdge XE7100 Installation and Service Manual

The PowerEdgeXE7100 is an ultradense 5U enclosure that supports up to two independent two-socket (2S) sleds and 100 x 3.5-inch drives. The PowerEdge XE7100 enclosure supports the following:

• Up to two server sleds and up to two expander modules
• Six rear accessible system fans
• Two 2400 W redundant power supply units
• Up to 16 DDR4 RDIMM/LRDIMM with maximum capacity up to 2048 GB per sled
• Up to 100 x 3.5-inch SAS or SATA drives
• Up to 8 x 7 mm SATA SSD (4 supported for NVMe SSD)
  NOTE For more information about how to hot swap NVMe PCIe SSD U.2 device, see the Dell Express Flash NVMe PCIe SSD User's Guide at https://www.dell.com/support> Browse all Products > Data Center Infrastructure >  Storage Adapters & Controllers > Dell PowerEdge Express Flash NVMe PCIe SSD > Documentation > Manuals and Documents.
  NOTE All instances of SAS, SATA drives are seen as drives in this document, unless specified otherwise.

  For more information about supported drives, see the Drive specifications section.