Dell EMC PowerEdge XE7100 Installation and Service Manual
Safety instructions
NOTE To avoid injury, do not lift the system on your own, get others to assist you.
WARNING Opening or removing the
system cover while the
system is turned on may expose you to a risk of electric shock.
CAUTION Do not operate the
system without the cover for a duration exceeding five minutes. Operating the system without the system cover can result in component damage.
CAUTION Many repairs may only
be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation,
or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that are
shipped with your product.
CAUTION To ensure proper operation and cooling, all bays in the system and system fans must be always populated with a component or a blank.
NOTE It is recommended
that you always use an antistatic mat and antistatic strap while working
on components inside the system.
NOTE While replacing the hot swappable PSU, after next server boot; the new PSU automatically updates to the same firmware and configuration of the replaced one. For more information about the Part replacement configuration, see the Lifecycle Controller User's Guide at https://www.dell.com/idracmanuals
NOTE While replacing faulty storage controller/FC/NIC card with the same type of card, after you power on the system; the new card automatically updates to the same firmware and configuration of the faulty one. For more information about the Part replacement configuration, see the Lifecycle Controller User's Guide at https://www.dell.com/idracmanuals
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\