CAUTION:The system
requires one power supply unit (PSU) for normal operation. On power-redundant systems, remove and replace only one PSU at a time in
a system that is powered on.
Disconnect the power cable
from the power outlet and from the PSU that you intend to remove.
Remove the cable from the
strap on the PSU handle.
Unlatch and lift or remove
the optional cable management accessory if it interferes with the PSU removal.
NOTE:For information about
the cable management when the PSU is removed or installed while the system
is in a rack, see the system’s cable management arm documentation at PowerEdge Manuals.
Steps
Press the release latch and holding the PSU handle, slide the PSU out of the bay.
Figure 1. Removing a power supply unit
NOTE:The image is only for the representation purpose.
The label may vary.
