Dell PowerEdge XE9685L Installation and Service Manual

Setting up the system

Perform the following steps to set up the system:

1. Unpack the system.
2. Install the system into the rack. For more information, see the rail installation and cable management accessory guides relevant to your rail and cable management solution at PowerEdge manuals.
3. Connect the peripherals to the system and the system to the electrical outlet.
4. Power on the system.
   NOTE:AI/ML servers with different GPUs may exhibit differing POST times during an AC cycle. The system may remain at 'AC Input Detected. Initializing and Verifying System Security' screen for approximately 5-10 minutes.

   
   

   

   
   

   NOTE:For more information about setting up the system, see the Quick Start Guide at PowerEdge Manuals.

   NOTE: For information about managing the basic settings and features of the system, see the Pre-operating system management applications chapter.