Dell PowerEdge XE9685L Installation and Service Manual

PDF

System memory guidelines

The PowerEdgeXE9685L system supports DDR5 registered DIMMs (RDIMMs). System memory holds the instructions that are started by the processor.

Your system memory is organized into 12 channels per processor (one memory sockets per channel),12 memory sockets per processor and 24 memory sockets per system.

Figure 1. Memory channels
This image shows memory location PowerEdgeXE9685L

Memory channels are organized as follows:

Table 1. Memory channels A through FThe table describes memory channels and how the channels are organized.
Processor Channel A Channel B Channel C Channel D Channel E Channel F
Processor 0 Slots A1 Slots A5 Slots A3 Slots A9 Slots A7 Slots A11
Processor 1 Slots B1 Slots B5 Slots B3 Slots B9 Slots B7 Slots B11
Table 2. Memory channels G through LThe table describes memory channels and how the channels are organized.
Processor Channel G Channel H Channel I Channel J Channel K Channel L
Processor 0 Slots A2 Slots A6 Slots A4 Slots A10 Slots A8 Slots A12
Processor 1 Slots B2 Slots B6 Slots B4 Slots B10 Slots B8 Slots B12
Table 3. Supported memory matrixThe table describes the supported memory matrix.
DIMM type Rank Capacity DIMM rated voltage and speed Operating Speed
1 DIMM per channel (DPC)
RDIMM 2 R 64 GB DDR5 (1.1 V), 6400 MT/s Up to 6400 MT/s
96 GB DDR5 (1.1 V), 6400 MT/s
128 GBDDR5 (1.1 V), 6400 MT/s
NOTE:The processor may reduce the performance of the rated DIMM speed.
NOTE:Maximum DIMM transfer speed support dependent on CPU SKU and DIMM population.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\