
Dell PowerEdge XE9780 Installation and Service Manual
Expansion card installation guidelines
NOTE:The expansion-cards are not
hot-swappable.
The following table provides guidelines for installing expansion cards to ensure proper cooling and mechanical fit. The expansion cards with the highest priority should be installed first using the slot priority indicated. All the other expansion cards should be installed in the card priority and slot priority order.
| Riser Configurations (RC) | Expansion card risers | Number of processors | PERC type supported | Rear storage possible | x8 CPU 0 | x16 CPU 0 | x8 CPU 1 | x16 CPU 1 |
|---|---|---|---|---|---|---|---|---|
| RC0-B300 PSRBB | No Riser | 2 | N/A | No | 0 | 2 | 0 | 2 |
| RC0-B200 PSBB | No Riser | 2 | N/A | No | 0 | 6 | 0 | 6 |
| Riser Configurations (RC) | Expansion card risers | Number of processors | PERC type supported | Rear storage possible | Upstream from x16 CPU 1 OCP Slot 1 | Upstream from x16 CPU 1 PCIe Slot 2 | Upstream from x16 CPU 1 PCIe Slot 3 | Upstream from x16 CPU 1 PCIe Slot 4 | Upstream from x16 CPU 1 PCIe Slot 5 | Upstream from x16 CPU 1 PCIe Slot 6 | Upstream from x16 CPU 1 PCIe Slot 7 | Upstream from x16 CPU 0 PCIe Slot 8 | Upstream from x16 CPU 0 PCIe Slot 9 | Upstream from x16 CPU 0 PCIe Slot 10 | Upstream from x16 CPU 0 PCIe Slot 11 | Upstream from x16 CPU 0 PCIe Slot 12 | Upstream from x16 CPU 0 PCIe Slot 13 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| RC0-B300 PSRBB | No Riser | 2 | N/A | No | 1 | 0 | 1 | 0 | 0 | 1 | 0 | 0 | 1 | 0 | 0 | 1 | 0 |
| RC0-B200 PSBB | No Riser | 2 | N/A | No | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 |
| Card type | Slot priority | Maximum number of cards |
|---|---|---|
| NVIDIA Mellanox ConnectX-7, NDR 400G InfiniBand adapter card, 1x OSFP Direct Supply Method (single port) | 4, 8, 7, 11, 2, 10, 5, 13, 6, 9, 3,12 | 12 |
| NVIDIA Mellanox ConnectX-7 200 GB QSFP112 Gen 5.0 (dual port) | 4, 8, 7, 11, 2, 10, 5, 13, 6, 9, 3,12 | 12 |
| Broadcom 1000 BASE-T Adapter 1 GB (quad port) | 4, 8, 7, 11, 2, 10, 5, 13, 6, 9, 3,12 | 12 |
| Broadcom BCM 5719 PCIe adapter 1 GB (quad port) | 4, 8, 7, 11, 2, 10, 5, 13, 6, 9, 3,12 | 12 |
| Broadcom OCP 3.0 25 GB (dual port) | 1 | 1 |
| Broadcom OCP 3.0 1 GB (quad port) | 1 | 1 |
| NVIDIA GPU 1000 W AC QB | 21, 22, 23, 24, 25, 26, 27, 28 | 8 |
| NVIDIA GPU 1000 W AC | 21, 22, 23, 24, 25, 26, 27, 28 | 8 |
| BOSS DC-MHS | Integrated | 1 |
NOTE:The NVIDIA NIC 400 GB OSFP (single port) only supports E-W
(East-West) communications only in B200 GPU configuration.
| Card type | Slot priority | Maximum number of cards |
|---|---|---|
| NVIDIA B300 accelerator | 21, 22, 23, 24, 25, 26, 27, 28 | 8 |
| NVIDIA DPU FH 200GB | 6, 9, 3, 12 | 4 |
| NVIDIA DPU FH 400GB (post RTS) | 6, 9, 3, 12 | 4 |
| NVIDIA OSFP NIC: 400G NDR | 6, 9, 3, 12 | 4 |
| Broadcom NIC 200 GB (dual port) | 6, 9, 3, 12 | 4 |
| NVIDIA NIC 400GB (single port), 100 GB (dual port) | 6, 9, 3, 12 | 4 |
| Intel NIC 100 GB (dual port) | 6, 9, 3, 12 | 4 |
| Broadcom NIC 100 GB (dual port) | 6, 9, 3, 12 | 4 |
| Broadcom OCP 3.0 200 GB (dual port) | 1 | 1 |
| Broadcom OCP 3.0 100 GB (dual port) | 1 | 1 |
| Intel OCP 3.0 100 GB (dual port) | 1 | 1 |
| NVIDIA OCP 3.0 100 GB (dual port) | 1 | 1 |
| Broadcom OCP 3.0 25 GB (dual port) | 1 | 1 |
| NVIDIA OCP 3.0 25 GB (dual port) | 1 | 1 |
| Intel OCP 3.0 25 GB (dual port) | 1 | 1 |
| Intel OCP 3.0 25 GB (quad port) | 1 | 1 |
| Broadcom OCP 3.0 25 GB (quad port) | 1 | 1 |
| Broadcom OCP 3.0 10 GB (dual port) | 1 | 1 |
| Intel OCP 3.0 10 GB (dual port) (post RTS) | 1 | 1 |
| Intel OCP 3.0 10 GB (quad port) | 1 | 1 |
| Broadcom OCP 3.0 (quad port) 10 GB | 1 | 1 |
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\