Dell PowerEdge XE9780 Installation and Service Manual

PDF

System memory guidelines

The XE9780 supports up to 16 DIMMs per processor (up to 32 DIMMs in a dual- processor configuration). Each server has 8 memory channels per processor, with each channel supporting up to 2 DIMMs.

Your system memory is organized into eight channels per processor (two memory sockets per channel),16 memory sockets per processor and 32 memory sockets per system.

Figure 1. Memory channels
This image shows memory location PowerEdge XE9780

Memory channels are organized as follows:

Table 1. Memory channelsThe table describes memory channels and how the channels are organized.
Processor Channel A Channel B Channel C Channel D Channel E Channel F Channel G Channel H
Processor 0Slots A1 and A9 Slots A7 and A15 Slots A3 and A11 Slots A5 and A13 Slots A4 and A12 Slots A6 and A14 Slots A2 and A10 Slots A8 and A16
Processor 1Slots B1 and B9 Slots B7 and B15 Slots B3 and B11 Slots B5 and B13 Slots B4 and B12 Slots B6 and B14 Slots B2 and B10 Slots B8 and B16
NOTE:The processor may reduce the performance of the rated DIMM speed.
NOTE:Maximum DIMM transfer speed support dependent on CPU SKU and DIMM population.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\